FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_app/spi/spi_api.h @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 30 Jan 2020 17:45:48 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/****************************************************************************/ /* */ /* File Name: spi_api.h */ /* */ /* Purpose: This file contains data structures and functions prototypes */ /* used to send events to the SPI SWE. */ /* */ /* Version 0.1 */ /* */ /* Date Modification */ /* ------------------------------------ */ /* 20/08/2000 Create */ /* */ /* Author */ /* */ /* (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved*/ /****************************************************************************/ #ifndef __SPI_API_H_ #define __SPI_API_H_ #include "rv/rv_general.h" #include "abb/abb.h" #ifdef __cplusplus extern "C" { #endif /* the message offset must differ for each SWE in order to have unique msg_id in the system */ #define SPI_MESSAGES_OFFSET (0x34 << 10) /* define a first msg id */ #define SPI_MESSAGE_1 (SPI_MESSAGES_OFFSET | 0x0001) typedef void (*CALLBACK_FUNC_NO_PARAM)(void); typedef void (*CALLBACK_FUNC_U16)(UINT16 *); /*****************************************/ /* structures of messages send to SPI */ /*****************************************/ typedef struct { T_RV_HDR os_hdr; UINT16 page; UINT16 address; UINT16 data; } T_SPI_WRITE; typedef struct { T_RV_HDR os_hdr; UINT16 page; UINT16 address; } T_SPI_READ; typedef struct { T_RV_HDR os_hdr; UINT16 channels; UINT16 itval; } T_SPI_ABB_CONF_ADC; typedef struct { T_RV_HDR os_hdr; UINT16 *Buff; CALLBACK_FUNC_NO_PARAM callback_func; } T_SPI_ABB_READ_ADC; #ifdef __cplusplus } #endif /* Prototypes */ /********************************************************************************/ /* */ /* Function Name: spi_abb_write */ /* */ /* Purpose: This function is used to send to the SPI mailbox a */ /* WRITE REGISTER rqst msg. */ /* */ /* Input Parameters: */ /* - page : ABB Page where to read the register. */ /* - address : address of the ABB register to read. */ /* - data : data to write in the ABB register */ /* */ /* Return : */ /* - RVM_NOT_READY : the SPI task is not ready */ /* - RV_MEMORY_ERR : the SPI task has not enough memory */ /* - RV_OK : normal processing */ /* */ /* Note: */ /* None. */ /* */ /********************************************************************************/ T_RV_RET spi_abb_write(UINT16 page, UINT16 address, UINT16 data); /********************************************************************************/ /* */ /* Function Name: spi_abb_read */ /* */ /* Purpose: This function is used to send a READ REGISTER rqst msg */ /* to the SPI mailbox. */ /* */ /* Input Parameters: */ /* - page : ABB Page where to read the register. */ /* - address : address of the ABB register to read. */ /* - CallBack : callback function called by the spi task */ /* at the end of the read process. */ /* */ /* Return : */ /* - RVM_NOT_READY : the SPI task is not ready */ /* - RV_MEMORY_ERR : the SPI task has not enough memory */ /* - RV_OK : normal processing */ /* */ /* Note: */ /* None. */ /* */ /********************************************************************************/ T_RV_RET spi_abb_read(UINT16 page, UINT16 address, CALLBACK_FUNC_U16 CallBack); /********************************************************************************/ /* */ /* Function Name: spi_abb_conf_ADC */ /* */ /* Purpose: This function is used to send to the SPI mailbox a rqst msg */ /* for configuring ABB MADC for conversions. */ /* */ /* Input Parameters: */ /* - channels : ABB channels to be converted. */ /* - itval : configure the End Of Conversion IT. */ /* */ /* Return : */ /* - RVM_NOT_READY : the SPI task is not ready */ /* - RV_MEMORY_ERR : the SPI task has not enough memory */ /* - RV_OK : normal processing */ /* */ /* Note: */ /* None. */ /* */ /********************************************************************************/ T_RV_RET spi_abb_conf_ADC(UINT16 channels, UINT16 itval); /********************************************************************************/ /* */ /* Function Name: spi_abb_read_ADC */ /* */ /* Purpose: This function is used to send to the SPI mailbox a rqst msg */ /* for reading the ABB ADC results. */ /* */ /* Input Parameters: */ /* - Buff : pointer to the buffer filled with ADC results. */ /* - CallBack : callback function called by the spi task */ /* at the end of the read process. */ /* */ /* Return : */ /* - RVM_NOT_READY : the SPI task is not ready */ /* - RV_MEMORY_ERR : the SPI task has not enough memory */ /* - RV_OK : normal processing */ /* */ /* Note: */ /* None. */ /* */ /********************************************************************************/ T_RV_RET spi_abb_read_ADC(UINT16 *Buff, CALLBACK_FUNC_NO_PARAM CallBack); #endif /* __SPI_API_H_ */