view src/cs/drivers/drv_app/pwr/pwr_analog_dev.h @ 638:cab2f315827e

FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents fb95e3f83dc5
children
line wrap: on
line source

/*******************************************************************************
 *
 * pwr_analog_dev.h
 *
 * Purpose: This file contains definitions that can be used by any SWE
 *          for power management services.
 *
 * Author    Candice Bazanegue (c-brille@ti.com)
 *
 * (C) Texas Instruments 2001
 *
 ******************************************************************************/

#ifndef __PWR_ANALOG_DEV_H__
#define __PWR_ANALOG_DEV_H__

#ifndef _WINDOWS
   #include "chipset.cfg"
#endif

/* Constants relative to the analog device */

#if (ANLG_FAM == 1) 

#define VOLTAGE_LOOP_OFFSET   400   /* (mV) measured */
#define MADC_OFFSET           160   /* (mV) measured */

#define DAC_THRESHOLD         240   /* (mV) spec */
#define DAC_VOLTAGE_STEP      1875  /* (uV) spec */
#define DAC_CURRENT_STEP      937   /* (uA) */
#define MADC_VOLTAGE_STEP     1710  /* (uV) spec */
#define MADC_CURRENT_STEP     855   /* (uA) spec */

#elif (ANLG_FAM == 2)

#define VOLTAGE_LOOP_OFFSET   200   /* (mV) measured */
#define MADC_OFFSET           160   /* (mV) measured */

#define DAC_THRESHOLD         0     /* (mV) spec */
#define DAC_VOLTAGE_STEP      1710  /* (uV) spec */
#define DAC_CURRENT_STEP      855   /* (uA) */
#define MADC_VOLTAGE_STEP     1710  /* (uV) spec */
#define MADC_CURRENT_STEP     855   /* (uA) spec */

#endif	// ANLG_FAM

#endif /* __PWR_ANALOG_DEV_H__ */