view src/cs/drivers/drv_app/fchg/fchg_task.c @ 638:cab2f315827e

FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 1c711302732a
children
line wrap: on
line source

/*
 * The FCHG task's core function lives here.
 */

#include "fchg/fchg_env.h"
#include "fchg/fchg_func_i.h"
#include "rv/rv_general.h"
#include "rvf/rvf_api.h"
#include "rvm/rvm_use_id_list.h"
#include "abb/abb.h"

static void set_initial_state(void)
{
	SYS_UWORD16 abb_status;

	abb_status = ABB_Read_Status();
	if (abb_status & CHGPRES) {
		if (pwr_ctrl->config_present)
			pwr_ctrl->state = FCHG_STATE_READY_TO_CHARGE;
		else
			pwr_ctrl->state = FCHG_STATE_NO_CHARGING;
	} else
		pwr_ctrl->state = FCHG_STATE_NO_EXT_PWR;
}

T_RV_RET fchg_core(void)
{	
	BOOLEAN error_occured = FALSE;
	T_RV_HDR *msg_ptr;

	rvf_send_trace("FCHG task: Initialization", 25, NULL_PARAM,
			RV_TRACE_LEVEL_DEBUG_LOW, FCHG_USE_ID);
	pwr_load_ffs_batt_table();
	pwr_load_ffs_charging_config();
	set_initial_state();
	pwr_init_discharge();

	/* loop to process messages */
	while (error_occured == FALSE)
	{
		/* Wait for the necessary events (infinite wait for a msg in the mailbox 0). */
		UINT16 received_event = rvf_wait (0xffff, 0);
					
		/* If an event related to mailbox 0 is received, then */
		if (received_event & RVF_TASK_MBOX_0_EVT_MASK) 
		{
			/* Read the message in the driver mailbox and delegate action..*/
			msg_ptr = (T_RV_HDR *) rvf_read_mbox(FCHG_MAILBOX);
			if (msg_ptr) {
				pwr_process_message(msg_ptr);
				rvf_free_buf ((void *) msg_ptr);
			}
		}

		/* Timers */
		if (received_event & RVF_TIMER_0_EVT_MASK)
			pwr_handle_timer();

	}	 // end of while
	return RV_OK;	
}