FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.

/*
 * BUZZER.H
 *
 * Buzzer and light control
 *
 * Target : ARM 
 *
 * Copyright (c) Texas Instruments 1996
 *
 */

#define BZ_LEVEL       ARMIO_BUZZER
#define LT_LEVEL       ARMIO_LIGHT

// Bit definitions in CNTL
#define BZ_ON			0x01	// start buzzer
#define LT_ON			0x02	// start light

// Buzzer control
void BZ_Init(void);
void BZ_Enable(void);
void BZ_Disable(void);
void BZ_Tone(int f);
void BZ_Volume(int v);
void BZ_IntHandler(void);
void BZ_KeyBeep_ON(void);
void BZ_KeyBeep_OFF(void);

// LCD and keypad Light control
void LT_Enable(void);
void LT_Disable(void);
void LT_Level(SYS_WORD8 level);
SYS_BOOL LT_Status(void);