FreeCalypso > hg > fc-magnetite

view src/aci2/aci/aci_bat_csc.c @ 638:cab2f315827e

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 93999a60b835
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  ACI_BAT
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved. 
|
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This BAT wrapper modul is ...
| 
+----------------------------------------------------------------------------- 
*/ 
 
#include "aci_all.h"     /* includes prim.h, which includes p_bat.h */ 
#include "aci_cmh.h"     /* prototypes of sAT_,qAT_,tAT_    */
#include "aci_cmd.h"
#include "aci_lst.h" 
#include "ati_int.h"
#include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ 
#include "aci_bat.h"


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentBAND     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentBAND(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_BAT_cmd_set_percent_band *band = cmd->params.ptr_set_percent_band;
  U8 bandType;

  TRACE_FUNCTION ("sBAT_PercentBAND()");
  
#if 0
  if (band->band NEQ BAT_P_BAND_BAND_NOT_PRESENT)
  {
    ret = sAT_PercentBAND(src_infos_psi->srcId, band->mode, (U8)band->band);
  }
#else
  switch (band->band)
  {
  case BAT_P_BAND_BAND_900:
    bandType = 1;
    break;
  case BAT_P_BAND_BAND_1800:  
    bandType = 2;
    break;
  case BAT_P_BAND_BAND_1900:  
    bandType = 4;
    break;
  case BAT_P_BAND_BAND_E_GSM: 
    bandType = 8;
    break;
  case BAT_P_BAND_BAND_850:  
    bandType = 16;
    break;
  default:
    return ret;
  }
  ret = sAT_PercentBAND(src_infos_psi->srcId, band->mode, bandType);
#endif

  return ret;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : tBAT_PercentBAND     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT tBAT_PercentBAND(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  TRACE_FUNCTION ("tBAT_PercentBAND()");
  return (ACI_BAT_FAIL);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentBAND     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentBAND(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_band band;

  TRACE_FUNCTION ("qBAT_PercentBAND()");

  resp.ctrl_response = BAT_RES_QUE_PERCENT_BAND;
  resp.response.ptr_que_percent_band = &band;

  ret = qAT_PercentBAND(src_infos_psi->srcId,(T_ACI_BAND_MODE*)&band.mode, (U8*)&band.band);
  
  aci_bat_send(src_infos_psi, &resp);
  return (ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCPI      |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCPI(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                      T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_BAT_cmd_response resp;
  //T_BAT_res_que_percent_cpi cpi;

  TRACE_FUNCTION ("qBAT_PercentCPI()");
  
  //resp.ctrl_response = BAT_RES_QUE_PERCENT_CPI;
  /* hmm, do not know which ACI function to call ! */ 
  aci_bat_send(src_infos_psi, &resp);
  return (ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCNAP     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCNAP(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_cnap cnap;

  TRACE_FUNCTION ("qBAT_PercentCNAP()");

  resp.ctrl_response = BAT_RES_QUE_PERCENT_CNAP;
  resp.response.ptr_que_percent_cnap = &cnap;

  ret = qAT_PercentCNAP(src_infos_psi->srcId);
  aci_bat_send(src_infos_psi, &resp);
  return (ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentALS      |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentALS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                      T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_ACI_ALS_MOD ALSmode;

  TRACE_FUNCTION ("sBAT_PercentALS()");

#ifndef _SIMULATION_
/* mapping for SAP BAT %ALS values according to 8415.052.doc */
  switch( cmd->params.ptr_set_percent_als->mode )
  {
      case BAT_P_ALS_MOD_SPEECH:
        ALSmode = ALS_MOD_SPEECH;
        break;
  
      case BAT_P_ALS_MOD_AUX_SPEECH:
        ALSmode = ALS_MOD_AUX_SPEECH;
        break;
  
      default:
        cmdCmeError(CME_ERR_OpNotSupp);
        return (ACI_BAT_FAIL);
  }
#else /* if SIMULATION */
  ALSmode = cmd->params.ptr_set_percent_als->mode;
#endif /* SIMULATION */ 
  ret = sAT_PercentALS( src_infos_psi->srcId, ALSmode);
  return (ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : tBAT_PercentALS      |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT tBAT_PercentALS      (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  TRACE_FUNCTION ("tBAT_PercentALS()");
  return (ACI_BAT_FAIL);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentALS      |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentALS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                      T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_als als;
  T_ACI_ALS_MOD als_aci_mode;

  TRACE_FUNCTION ("qBAT_PercentALS()");

  resp.ctrl_response = BAT_RES_QUE_PERCENT_ALS;
  resp.response.ptr_que_percent_als = &als;

  ret = qAT_PercentALS( src_infos_psi->srcId,&als_aci_mode);
  switch(als_aci_mode)
  {
      case ALS_MOD_SPEECH:
        als.mode = BAT_P_ALS_MOD_SPEECH;
        break;
  
      case ALS_MOD_AUX_SPEECH:
        als.mode = BAT_P_ALS_MOD_AUX_SPEECH;
        break;
  
      default:
        cmdCmeError(CME_ERR_OpNotSupp);
        return (ACI_BAT_FAIL);
  }
  aci_bat_send(src_infos_psi, &resp);
  return (ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentPPP      |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
#if defined(FF_WAP) || defined(FF_TCP_IP) || defined(FF_SAT_E)

GLOBAL T_ACI_BAT_RSLT sBAT_PercentPPP(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                      T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PercentPPP()");

  ret = sAT_PercentPPP(src_infos_psi->srcId,
            cmd->params.ptr_set_percent_ppp->authprot,
            cmd->params.ptr_set_percent_ppp->user,
            cmd->params.ptr_set_percent_ppp->password,
            cmd->params.ptr_set_percent_ppp->conn_type);

  return (ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentPPP      |
+--------------------------------------------------------------------+

  PURPOSE : 
*/

GLOBAL T_ACI_BAT_RSLT qBAT_PercentPPP(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                      T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_ppp ppp;

  TRACE_FUNCTION ("qBAT_PercentPPP()");

  resp.ctrl_response = BAT_RES_QUE_PERCENT_PPP;
  resp.response.ptr_que_percent_ppp = &ppp;

  qAT_PercentPPP(src_infos_psi->srcId, (ULONG*)&ppp.ipaddr, (ULONG*)&ppp.dns1,(ULONG*)&ppp.dns2);
  aci_bat_send(src_infos_psi, &resp);
  return (ret);
}
#endif /* defined(FF_WAP) || defined(FF_TCP_IP) || defined(FF_SAT_E) */