view src/cs/layer1/tm_cust0/l1tm_tpu10.c @ 547:c3f2f79dc5b8

l1_rf12.c compiled-in default RF band tables: a round of cleanup * Uncalibrated default g_magic values changed from old Clara RF numbers (yes, Clara, not even Leonardo) to the approximately correct value for our current hw; * Uncalibrated default Rx and Tx channel calibration tables providing neutral correction values: fixed bogus ARFCNs from blind copy-n-paste between different bands; * Restored #if (ORDER2_TX_TEMP_CAL==1) in the Tx temperature compensation tables; * Fully rewrote the big comment before these rf_XXX structures to reflect the current situation. This change is part of the larger transition in FreeCalypso from reverse to forward engineering, from reconstruction of lost original bits to ongoing forward development and maintenance.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 17 Nov 2018 19:57:34 +0000
parents cc44352c702f
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1TM_TPU10.C
 *
 *        Filename l1tm_tpu10.c
 *        Version  1.4
 *        Date     01/10/03
 * 
 ************* Revision Controle System Header *************/

#include "l1_confg.h"
#if (TESTMODE && (RF==10))

#include "tm_defs.h"
#include "l1_const.h"
#include "l1_types.h"
					
#include "l1tm_defty.h"
#include "l1tm_cust.h"
#include "l1tm_tpu10.h"

#if (AUDIO_TASK == 1)
  #include "l1audio_const.h"
  #include "l1audio_cust.h"
  #include "l1audio_defty.h"
#endif
  
#if (L1_GTT == 1)
  #include "l1gtt_const.h"
  #include "l1gtt_defty.h"
#endif

#include "l1_defty.h"
#include "l1_msgty.h"
#include "l1_tabs.h"

#include "l1tm_msgty.h"
#include "l1tm_varex.h"

#if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3))
  #include "spi_drv.h"
#endif   

#include "sys_types.h"
#include "general.h"
#include "l1_time.h"
#include "tpudrv.h"
#include "tpudrv10.h"
#include <string.h>

// Import band configuration from Flash module (need to replace by an access function)


// External function prototypes

void Cust_tm_tpu_table_write        (T_TM_RETURN *tm_return, WORD8 index, UWORD8 size, UWORD8 table[])
{
/*
	INDICES BETWEEN in [0..63] RANGE ARE RESERVED FOR TI RF MODULE
*/


    // fill in the cid
    tm_return->cid = TPU_TABLE_WRITE;

    switch (index)
    {
        default:
          tm_return->size = 0;
          tm_return->status = E_BADINDEX;
          break;
    } // end of switch
}

void Cust_tm_tpu_table_read         (T_TM_RETURN *tm_return, WORD8 index)
{
/*
	INDICES BETWEEN in [0..63] RANGE ARE RESERVED FOR TI RF MODULE
*/

    // fill in the cid
    tm_return->cid = TPU_TABLE_READ;

    switch (index)
    {
        default:
          tm_return->size = 0;
          tm_return->status = E_BADINDEX;
          break;
    } // end of switch
}

#endif //TESTMODE