niq32.c DTR handling restored for targets that have it TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a fixed pull-down resistor on this GPIO line), and the code in niq32.c called UAF_DTRInterruptHandler() (implemented in uartfax.c) from the IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official fw this GPIO is a floating input, all of the DTR handling code in uartfax.c including the interrupt logic is still there, but the hobbled TCS211-20070608 semi-src delivery which OM got from TI contained a change in niq32.c (which had been kept in FC until now) that removed the call to UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test" hacks. The present change fixes this bug at a long last: if we are building fw for a target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c, whereas if we are building fw for a target that does not use this classic GPIO arrangement, the code in niq32.c goes back to what we got from OM and all DTR & DCD code in uartfax.c is conditioned out. This change also removes the very last remaining bit of "CC test" bogosity from our FreeCalypso code base.

/**
 * @file   mks_cfg.h
 *
 * Configuration file for MKS service.
 *
 * This file is part of the MKS API.
 *
 * @author   Laurent Sollier (l-sollier@ti.com)
 * @version 0.1
 */

/*
 * History:
 *
 *   Date          Author       Modification
 *  ----------------------------------------
 *  11/19/2001     L Sollier    Create
 *
 *
 * (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved
 */

#ifndef _MKS_CFG_H_
#define _MKS_CFG_H_



/** Define the number max of magic key sequence.
 */
#define MKS_NB_MAX_OF_KEY_SEQUENCE (5)

/** Define the number max of key in a magic key sequence.
 */
#define MKS_NB_MAX_OF_KEY_IN_KEY_SEQUENCE (10)

/** Define the number max of notified key for post sequence.
 */
#define MKS_NB_MAX_OF_KEY_FOR_POST_SEQUENCE (10)

/** Define time to wait (ms) between two keys before the key sequence reset.
 */
#define MKS_TIME_RESET_KEY_SEQUENCE 3000

/** Define the maximum size for key sequence name
 */
#define KPD_MAX_CHAR_NAME 20

#endif /* _MKS_CFG_H_ */