FreeCalypso > hg > fc-magnetite

view src/cs/drivers/drv_app/lcc/lcc_modulate.c @ 635:baa0a02bc676

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
niq32.c DTR handling restored for targets that have it TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a fixed pull-down resistor on this GPIO line), and the code in niq32.c called UAF_DTRInterruptHandler() (implemented in uartfax.c) from the IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official fw this GPIO is a floating input, all of the DTR handling code in uartfax.c including the interrupt logic is still there, but the hobbled TCS211-20070608 semi-src delivery which OM got from TI contained a change in niq32.c (which had been kept in FC until now) that removed the call to UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test" hacks. The present change fixes this bug at a long last: if we are building fw for a target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c, whereas if we are building fw for a target that does not use this classic GPIO arrangement, the code in niq32.c goes back to what we got from OM and all DTR & DCD code in uartfax.c is conditioned out. This change also removes the very last remaining bit of "CC test" bogosity from our FreeCalypso code base.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 19 Jan 2020 01:41:35 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/******************************************************************************
 * Power Task (pwr)
 * Design and coding by Svend Kristian Lindholm, skl@ti.com
 *
 * PWR SW Modulation
 *
 * $Id: pwr_modulate.c 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $
 *
 ******************************************************************************/
#include <string.h>
#include "lcc/lcc.h"
#include "lcc/lcc_trace.h"
#include "lcc/lcc_modulate.h"
#include "lcc/lcc_cfg_i.h"
#include "lcc/lcc_cfg.h"
#include "rv/rv_defined_swe.h"
#include "abb/abb.h"

/******************************************************************************
 * Function prototypes
 ******************************************************************************/

void pwr_modulate_init(void);
void pwr_modulate_on(void);
void pwr_modulate_off(void);


#if (USE_Q401_CHG_CIRCUIT == 1)
extern T_PWR_CFG_BLOCK  *pwr_cfg;
#endif

void pwr_modulate_init(void) {
    ttw(ttr(TTrEventLow,"pwr_modulate_init(%d)" NL, 0));
    #if (USE_PWL_AS_MODULATOR == 1)
    BUZZ_LIGHT_REG |= 0x02;
    PWL_LEVEL_REG = 0xFF; // Full envelope function
    PWL_CTRL_REG  = 0x00; // No 32KHz clock
    #else
    // Set GPIO 6 HIGH
    *((volatile uint16 *) 0xfffe4806) |= 0x0020; // Enable GPIO module
    *((volatile uint16 *) 0xfffe4804) &= 0xffbf; // Set GPIO-6 = output
    *((volatile uint16 *) 0xfffe4802) |= 0x0080; // Set GPIO-6 = HIGH
    #endif
    ttw(ttr(TTrEventLow,"pwr_modulate_init(%d)" NL, 0xff));
}

void pwr_modulate_on(void) {
    ttw(ttr(TTrEventLow,"pwr_modulate_on(%d)" NL, 0));
#if (USE_Q401_CHG_CIRCUIT== 1)
    /* Program the DAC with the constant current value taken from /pwr/chg/chg<N>.cfg multiplied by k/255, where current k is in [1..255] */
    ABB_Write_Register_on_page(PAGE0, CHGREG, (pwr_cfg->data.k * pwr_cfg->chg.ichg_max) / 255);
#endif
#if (USE_Q402_CHG_CIRCUIT == 1)
    #if (USE_PWL_AS_MODULATOR == 1)
    BUZZ_LIGHT_REG |= 0x02;
    PWL_LEVEL_REG = 0xFF; // Full envelope function
    PWL_CTRL_REG  = 0x00; // No 32KHz clock
    #else
    // Use GPIO 6
    *((volatile uint16 *) 0xfffe4806) |= 0x0020; // Enable GPIO module
    *((volatile uint16 *) 0xfffe4804) &= 0xffbf; // Set GPIO-6 = output
    *((volatile uint16 *) 0xfffe4802) |= 0x0080; // Set GPIO-6 = HIGH
    #endif
#endif
    ttw(ttr(TTrEventLow,"pwr_modulate_on(%d)" NL, 0xFF));

}

void pwr_modulate_off(void) {
    ttw(ttr(TTrEventLow,"pwr_modulate_off(%d)" NL, 0));
#if (USE_Q401_CHG_CIRCUIT == 1)
    // Don't do anything - FET is fully controlled in pwr_modulate_on()
#endif
#if (USE_Q402_CHG_CIRCUIT == 1)
    #ifdef USE_PWL_AS_MODULATOR
    BUZZ_LIGHT_REG &= 0xfd;
    PWL_LEVEL_REG = 0x00; // No envelope function
    PWL_CTRL_REG  = 0x00; // No 32KHz clock
    #else
    // Use GPIO 6
    *((volatile uint16 *) 0xfffe4806) |= 0x0020; // Enable GPIO module
    *((volatile uint16 *) 0xfffe4804) &= 0xffbf; // Set GPIO-6 = output
    *((volatile uint16 *) 0xfffe4802) &= 0x007f; // Set GPIO-6 = LOW
    #endif
#endif
    ttw(ttr(TTrEventLow,"pwr_modulate_off(%d)" NL, 0xFF));
}