niq32.c DTR handling restored for targets that have it TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a fixed pull-down resistor on this GPIO line), and the code in niq32.c called UAF_DTRInterruptHandler() (implemented in uartfax.c) from the IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official fw this GPIO is a floating input, all of the DTR handling code in uartfax.c including the interrupt logic is still there, but the hobbled TCS211-20070608 semi-src delivery which OM got from TI contained a change in niq32.c (which had been kept in FC until now) that removed the call to UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test" hacks. The present change fixes this bug at a long last: if we are building fw for a target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c, whereas if we are building fw for a target that does not use this classic GPIO arrangement, the code in niq32.c goes back to what we got from OM and all DTR & DCD code in uartfax.c is conditioned out. This change also removes the very last remaining bit of "CC test" bogosity from our FreeCalypso code base.

/******************************************************************************
 * Power Task (pwr)
 * Design and coding by Svend Kristian Lindholm, skl@ti.com
 *
 * PWR Message Processing
 *
 * $Id: pwr_handle_message.h 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $
 *
 ******************************************************************************/
#ifndef __LCC_HANDLE_MESSAGE_H_
#define __LCC_HANDLE_MESSAGE_H_

#include "lcc/lcc.h"

/******************************************************************************
 * Function prototypes
 ******************************************************************************/

T_RVM_RETURN pwr_task_init(void);
T_RV_RET process_pwr_tm_read_request         (T_PWR_REQ *request);
T_RV_RET process_pwr_tm_write_request        (T_PWR_REQ *request);
T_RV_RET process_spi_adc_indication          (T_PWR_REQ *request);
void pwr_send_msg(uint32 msg_id ,T_RVF_ADDR_ID src_addr_id, T_RVF_ADDR_ID  dest_addr_id);
void pwr_modulate_on(void);
void pwr_modulate_off(void);
void start_q401_charge(void);
void stop_q401_charge(void);

void build_name(const char *ch_pre, char *cfg_id , UINT8 index, const char * ch_post,  char * name);
void cv_charging_house_keeping(void);
void end_charging_house_keeping(void);

#endif