view src/condat2/com/include/light_obsolete.h @ 635:baa0a02bc676

niq32.c DTR handling restored for targets that have it TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a fixed pull-down resistor on this GPIO line), and the code in niq32.c called UAF_DTRInterruptHandler() (implemented in uartfax.c) from the IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official fw this GPIO is a floating input, all of the DTR handling code in uartfax.c including the interrupt logic is still there, but the hobbled TCS211-20070608 semi-src delivery which OM got from TI contained a change in niq32.c (which had been kept in FC until now) that removed the call to UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test" hacks. The present change fixes this bug at a long last: if we are building fw for a target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c, whereas if we are building fw for a target that does not use this classic GPIO arrangement, the code in niq32.c goes back to what we got from OM and all DTR & DCD code in uartfax.c is conditioned out. This change also removes the very last remaining bit of "CC test" bogosity from our FreeCalypso code base.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 19 Jan 2020 01:41:35 +0000
parents 93999a60b835
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM (6301)
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Types definitions for the light emitting driver
|             .
+----------------------------------------------------------------------------- 
*/ 

#ifndef LIGHT_H
#define LIGHT_H

/*
 * devices
 */
#define LIGHT_DEVICE_BACKLIGHT     0
#define LIGHT_DEVICE_INSERVICELED  1

/*
 * device status
 */
#define LIGHT_STATUS_OFF           0
#define LIGHT_STATUS_ON            1
#define LIGHT_STATUS_DIMMED        2
#define LIGHT_STATUS_INTERMEDIATE  3
#define LIGHT_STATUS_BRIGHT        4

#define LIGHT_STATUS_GREEN         5
#define LIGHT_STATUS_ORANGE        6
#define LIGHT_STATUS_RED           7

#if defined (NEW_FRAME)
/*
 * to achieve backward compatibility with older definitions
 */
#define drv_SignalCB_Type           T_DRV_CB_FUNC
#define drv_SignalID_Type           T_DRV_SIGNAL
#define T_VSI_THANDLE               USHORT
#endif
/*
 * Prototypes
 */
EXTERN UBYTE light_Init      (void);
EXTERN void  light_Exit      (void);
EXTERN UBYTE light_SetStatus (UBYTE in_DeviceID, UBYTE in_NewStatus);
EXTERN UBYTE light_GetStatus (UBYTE in_DeviceID, UBYTE * in_StatusPtr);

void light_setBacklightOn( void );
void light_setBacklightIdle( void );
void light_setBacklightOff( void );

#endif