FreeCalypso > hg > fc-magnetite

view src/gpf2/ccd/mall.bat @ 600:8f50b202e81f

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
board preprocessor conditionals: prep for more FC hw in the future This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and all preprocessor conditionals throughout the code base that tested for it, replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These new symbols are specified as follows: CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by Mother Mychaela under the FreeCalypso trademark. This family will include modem products (repackagings of the FCDEV3B, possibly with RFFE or even RF transceiver changes), and also my desired FreeCalypso handset product. CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products (which will be firmware-compatible with the FCDEV3B if they use TI Rita transceiver, or will require a different fw build if we switch to one of Silabs Aero transceivers), but not the handset product. Right now this CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize everything dealing with MCSI. At the present moment the future of FC hardware evolution is still unknown: it is not known whether we will ever have any beyond-FCDEV3B hardware at all (contingent on uncertain funding), and if we do produce further FC hardware designs, it is not known whether they will retain the same FIC modem core (triband), if we are going to have a quadband design that still retains the classic Rita transceiver, or if we are going to switch to Silabs Aero II or some other transceiver. If we produce a quadband modem that still uses Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination, and the current fcdev3b build target will be renamed to fcmodem. OTOH, if that putative quadband modem will be Aero-based, then it will require a different fw build target, the fcdev3b target will stay as it is, and the two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM, but will have different RF_FAM numbers. But no matter which way we are going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B in places like ACI, and the present change clears the way for future evolution.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 01 Apr 2019 01:05:24 +0000
parents 864b8cc0cf63
children
line wrap: on
line source

@echo off
rem build all CCD variants
setlocal

set name=CCD
set name_small=ccd 
set err_file=..\%name_small%.err

@if x%_4ver% == x goto need4nt
@if x%1 == x-help goto help
@if x%1 == x-guitest goto guitest
@if x%1 == x-test goto test

REM default is gnumake:
set M=gnumake -r
REM use clearmake if under ClearCase
set IN_VOB=FALSE
REM is clearcase installed ?
if "%CLEARCASE_PRIMARY_GROUP%" == "" goto options
REM are we using a clearcase view ?
cleartool lsview -cview >nul 2>>&1
if errorlevel 1 goto options
REM on a clearcase view: use clearmake in gnu mode:
set M=clearmake -V -C gnu
set IN_VOB=TRUE

:options
REM set default options
set clean=0
set def_ver=DEV_BUILD
set ver=0
set maketarget=colibs all
REM parse command line options
:parse_opt
iff "%1" == "-gmake" then
  set M=gnumake -r
elseiff "%1" == "-clean" then
  iff "%maketarget%" == "colibs all cilibs" then
	  echo mall: option -clean ignored when -exp is given
	else
    set maketarget=clean
  endiff
elseiff "%1" == "-l" then
  iff "%2" == "" then
    echo error: no label name specified !
    goto help
  endiff
  set ver=%2
  shift
elseiff "%1" == "-exp" then
  iff %maketarget% == clean then
    echo mall: option -exp ignored when -clean is given
  else
    set maketarget=colibs all cilibs
  endiff
elseiff "%1" == "-n" then
  set M=echo
  shift
elseiff "%1" != "" then
  goto help
endiff
shift
if "%1" != "" goto parse_opt 

if exist %err_file% del %err_file% >nul

if %ver% != 0 echo "using label %ver% (not implemented yet) ..."

iff %maketarget% == clean then
  echo *** cleaning CCD libs *** | tee /a %err_file%
else
  echo *** making CCD libs *** | tee /a %err_file%
endiff

rem nuc Libraries
:arm7
echo ********** nuc arm7        **********        | tee /a %err_file%
echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err
rem ********** nuc arm7: splitted libraries ir/fl
rem RUN_FLASH=1 RUN_INT_RAM=0
echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 RUN_FLASH=1 RUN_INT_RAM=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

rem RUN_FLASH=0 RUN_INT_RAM=1
echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 RUN_FLASH=0 RUN_INT_RAM=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo ********** nuc arm7 ts3    **********        | tee /a %err_file%
echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 TOOL_CHOICE=3 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 TOOL_CHOICE=3 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 TOOL_CHOICE=3 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 TOOL_CHOICE=3 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

rem ********** nuc arm7 ts3 + DYNARR=1
echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=0 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=0 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=1 MEMSUPER=1 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm7 DEBUG=1 TRACE=0 MEMSUPER=1 TOOL_CHOICE=3 DYNARR=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo ********** nuc arm9 ts3    **********        | tee /a %err_file%
echo %M% TARGET=nuc PLATFORM=arm9 DEBUG=0 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm9 DEBUG=0 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm9 DEBUG=1 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm9 DEBUG=1 TRACE=0 MEMSUPER=0 TOOL_CHOICE=3 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm9 DEBUG=1 TRACE=1 MEMSUPER=1 TOOL_CHOICE=3 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm9 DEBUG=1 TRACE=1 MEMSUPER=1 TOOL_CHOICE=3 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo ********** nuc arm9 ts6    **********        | tee /a %err_file%
echo %M% TARGET=nuc PLATFORM=arm9 DEBUG=0 TRACE=0 MEMSUPER=0 TOOL_CHOICE=6 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm9 DEBUG=0 TRACE=0 MEMSUPER=0 TOOL_CHOICE=6 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm9 DEBUG=1 TRACE=0 MEMSUPER=0 TOOL_CHOICE=6 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm9 DEBUG=1 TRACE=0 MEMSUPER=0 TOOL_CHOICE=6 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=arm9 DEBUG=1 TRACE=1 MEMSUPER=1 TOOL_CHOICE=6 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=arm9 DEBUG=1 TRACE=1 MEMSUPER=1 TOOL_CHOICE=6 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo ********** nuc pc          **********        | tee /a %err_file%
echo %M% TARGET=nuc PLATFORM=pc DEBUG=0 TRACE=0 MEMSUPER=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=pc DEBUG=0 TRACE=0 MEMSUPER=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=pc DEBUG=1 TRACE=0 MEMSUPER=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=pc DEBUG=1 TRACE=0 MEMSUPER=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=pc DEBUG=1 TRACE=1 MEMSUPER=0 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=pc DEBUG=1 TRACE=1 MEMSUPER=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=nuc PLATFORM=pc DEBUG=1 TRACE=1 MEMSUPER=1 %maketarget% >>%err_file%
%M% TARGET=nuc PLATFORM=pc DEBUG=1 TRACE=1 MEMSUPER=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

rem win32 Libraries
echo ********** win32           **********        | tee /a %err_file%
echo %M% TARGET=win32 DEBUG=0 TRACE=0 %maketarget% >>%err_file%
%M% TARGET=win32 DEBUG=0 TRACE=0 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

echo %M% TARGET=win32 DEBUG=1 TRACE=1 %maketarget% >>%err_file%
%M% TARGET=win32 DEBUG=1 TRACE=1 %maketarget% >>%err_file% 2>>&1
if %? != 0 goto err

goto final

:help
text
usage:
mall {-help | 
      { [-l <LABEL>] | -clean | -exp | -gmake } 
     }
example: mall -l CCD_1.7.1 
-clean: clean objects
-exp  : export, i.e. checkin the built items
-gmake: use gnumake anyhow
endtext
goto end

:guitest
text
Tool without GUI - in consequence no GUI test implemented
endtext
goto end

:test
text
Test CCD functionality with GPF teststack:
- Change to /gpf/util/teststack:
- Call </gpf/util/teststack/mall.bat> to build teststack
- Call </gpf/util/teststack/mall.bat -test> to build and execute testsuite 
endtext
goto end

:need4nt
@echo Error: 4DOS or 4NT is needed
goto end

:err
grep "error " %err_file% 
@echo Errors occured ! See %err_file% for details.
endlocal
quit 1

:final
grep "warning " %err_file% 2> nul 

:end
endlocal
quit 0