view src/aci2/aci/psa_aaap.c @ 600:8f50b202e81f

board preprocessor conditionals: prep for more FC hw in the future This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and all preprocessor conditionals throughout the code base that tested for it, replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These new symbols are specified as follows: CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by Mother Mychaela under the FreeCalypso trademark. This family will include modem products (repackagings of the FCDEV3B, possibly with RFFE or even RF transceiver changes), and also my desired FreeCalypso handset product. CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products (which will be firmware-compatible with the FCDEV3B if they use TI Rita transceiver, or will require a different fw build if we switch to one of Silabs Aero transceivers), but not the handset product. Right now this CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize everything dealing with MCSI. At the present moment the future of FC hardware evolution is still unknown: it is not known whether we will ever have any beyond-FCDEV3B hardware at all (contingent on uncertain funding), and if we do produce further FC hardware designs, it is not known whether they will retain the same FIC modem core (triband), if we are going to have a quadband design that still retains the classic Rita transceiver, or if we are going to switch to Silabs Aero II or some other transceiver. If we produce a quadband modem that still uses Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination, and the current fcdev3b build target will be renamed to fcmodem. OTOH, if that putative quadband modem will be Aero-based, then it will require a different fw build target, the fcdev3b target will stay as it is, and the two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM, but will have different RF_FAM numbers. But no matter which way we are going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B in places like ACI, and the present change clears the way for future evolution.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 01 Apr 2019 01:05:24 +0000
parents 93999a60b835
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  ACI
|  Modul   :  psa_aaa
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This modul ...
+-----------------------------------------------------------------------------
*/

#ifdef DTI

#ifndef PSA_AAAP_C
#define PSA_AAAP_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "dti.h"      /* functionality of the dti library */

#include "aci.h"
#include "aci_lst.h"

#include "dti_conn_mng.h"
#include "dti_cntrl_mng.h"
#include "psa_uart.h"
#include "ati_io.h"

#include "aci_mem.h"

#include "ati_src_riv.h"
#include "psa_aaa.h"


/*
+-----------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : psa_aaa               |
| STATE   : code                        ROUTINE : psa_aaa_cmd_req       |
+-----------------------------------------------------------------------+

  PURPOSE : - 
*/
GLOBAL const void  psa_aaa_cmd_req	(T_AAA_CMD_REQ *cmd)
{
  TRACE_FUNCTION("psa_aaa_cmd_req()");
  /*
   * the results of this request are send to AAA by the
   * call back function riv_src_result_cb() which calls
   * psa_aaa_cmd_cnf() | psa_aaa_pres_ind() | psa_aaa_ures_ind() 
   */
  ati_src_riv_proc_cmd (cmd);

  PFREE (cmd);
}

/*
+-----------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : psa_aaa               |
| STATE   : code                        ROUTINE : psa_aaa_open_port_req |
+-----------------------------------------------------------------------+

  PURPOSE : - 
*/
GLOBAL const void  psa_aaa_open_port_req	(T_AAA_OPEN_PORT_REQ *cmd)
{
  UBYTE     dti_id  = DTI_DTI_ID_NOTPRESENT;
  UBYTE port_number = cmd->port_number;
  UBYTE      sub_no = cmd->sub_no;

  TRACE_FUNCTION("psa_aaa_open_port_req()");

  dti_id = ati_src_riv_open_port (port_number,
                                  sub_no,
                                  cmd->capability);

  PFREE (cmd);
  /*
   * we send here the confirmation, because there is no call back.
   * if dti_id = DTI_DTI_ID_NOTPRESENT, then the request failed
   */
  psaAAA_open_port_cnf (port_number, sub_no, dti_id);
}

/*
+-----------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : psa_aaa               |
| STATE   : code                        ROUTINE : psa_aaa_close_port_req|
+-----------------------------------------------------------------------+

  PURPOSE : - 
*/
GLOBAL const void  psa_aaa_close_port_req	(T_AAA_CLOSE_PORT_REQ *cmd)
{
  TRACE_FUNCTION("psa_aaa_close_port_req()");

  ati_src_riv_close_port (cmd->port_number, cmd->sub_no);

  PFREE (cmd);
  /*
   * we send here the confirmation, because there is no call back
   */
  psaAAA_close_port_cnf (cmd->port_number, cmd->sub_no);
}


/*
+-----------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : psa_aaa               |
| STATE   : code                        ROUTINE : psa_aaa_dti_rsp       |
+-----------------------------------------------------------------------+

  PURPOSE : - the response to psa_aaa_dti_ind()
*/
GLOBAL const void  psa_aaa_dti_rsp (T_AAA_DTI_RES *cmd)
{
  T_DTI_CONN_LINK_ID link_id;

  TRACE_FUNCTION("psa_aaa_dti_rsp()");
  /*
   * we need the link_id again, which we had to remember at psaAAA_dti_ind()
   */
  link_id = dti_cntrl_get_link_id (DTI_ENTITY_AAA, cmd->port_number, cmd->sub_no);

  ati_src_riv_dti_rsp (link_id);

  PFREE (cmd);
}


/*
+-----------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : psa_aaa                |
| STATE   : code                       ROUTINE : psa_aaa_disconnect_rsp |
+-----------------------------------------------------------------------+

  PURPOSE : - the response to psa_aaa_disconnect_ind()
*/
GLOBAL const void  psa_aaa_disconnect_rsp (T_AAA_DISCONNECT_RES *cmd)
{
  T_DTI_CONN_LINK_ID link_id;

  TRACE_FUNCTION("psa_aaa_disconnect_rsp()");
  /*
   * we need the link_id again, which we had to remember at psaAAA_dti_ind()
   */
  link_id = dti_cntrl_get_link_id (DTI_ENTITY_AAA, cmd->port_number, cmd->sub_no);

  ati_src_riv_disconnect_rsp (link_id);

  PFREE (cmd);
}


#endif /* DTI */