FreeCalypso > hg > fc-magnetite
view src/aci2/aci/cmh_ssq.c @ 600:8f50b202e81f
board preprocessor conditionals: prep for more FC hw in the future
This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and
all preprocessor conditionals throughout the code base that tested for it,
replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These
new symbols are specified as follows:
CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by
Mother Mychaela under the FreeCalypso trademark. This family will include
modem products (repackagings of the FCDEV3B, possibly with RFFE or even
RF transceiver changes), and also my desired FreeCalypso handset product.
CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products
(which will be firmware-compatible with the FCDEV3B if they use TI Rita
transceiver, or will require a different fw build if we switch to one of
Silabs Aero transceivers), but not the handset product. Right now this
CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize
everything dealing with MCSI.
At the present moment the future of FC hardware evolution is still unknown:
it is not known whether we will ever have any beyond-FCDEV3B hardware at all
(contingent on uncertain funding), and if we do produce further FC hardware
designs, it is not known whether they will retain the same FIC modem core
(triband), if we are going to have a quadband design that still retains the
classic Rita transceiver, or if we are going to switch to Silabs Aero II
or some other transceiver. If we produce a quadband modem that still uses
Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we
define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination,
and the current fcdev3b build target will be renamed to fcmodem. OTOH, if
that putative quadband modem will be Aero-based, then it will require a
different fw build target, the fcdev3b target will stay as it is, and the
two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM,
but will have different RF_FAM numbers. But no matter which way we are
going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B
in places like ACI, and the present change clears the way for future
evolution.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 01 Apr 2019 01:05:24 +0000 |
| parents | 93999a60b835 |
| children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : CMH_SSS +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module provides the query functions related to the | protocol stack adapter for SS. +----------------------------------------------------------------------------- */ #ifndef CMH_SSQ_C #define CMH_SSQ_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "aci.h" #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "aci_ext_pers.h" /* we are using personalisation extensions */ #include "aci_slock.h" /* in order to asure interfaces */ #ifdef FAX_AND_DATA #include "aci_fd.h" #endif /* of #ifdef FAX_AND_DATA */ #ifdef UART #include "dti.h" #include "dti_conn_mng.h" #endif #include "ksd.h" #include "psa.h" #include "psa_ss.h" #include "psa_sim.h" #include "cmh.h" #include "cmh_ss.h" #include "cmh_sim.h" #include "aci_ext_pers.h" #include "aci_slock.h" /*==== CONSTANTS ==================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_SSQ | | STATE : code ROUTINE : qAT_PlusCCFC | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CCFC AT command which is responsible to query the parameters for call forwarding supplementary services. <reason> : reason for CF. <class> : class of basic service. */ GLOBAL T_ACI_RETURN qAT_PlusCCFC ( T_ACI_CMD_SRC srcId, T_ACI_CCFC_RSN reason, T_ACI_CLASS class_type ) { SHORT sId; /* holds service id */ UBYTE ssCd; /* holds ss code */ T_ACI_RETURN retVal; TRACE_FUNCTION ("qAT_PlusCCFC"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } if( cmhPrm[srcId].ssCmdPrm.mltyTrnFlg NEQ 0 ) return( AT_BUSY ); /* *------------------------------------------------------------------- * check parameter <reason> *------------------------------------------------------------------- */ switch( reason ) { case( CCFC_RSN_Uncond ): ssCd = SS_CD_CFU; break; case( CCFC_RSN_Busy ): ssCd = SS_CD_CFB; break; case( CCFC_RSN_NoReply ): ssCd = SS_CD_CFNRY; break; case( CCFC_RSN_NotReach ): ssCd = SS_CD_CFNRC; break; case( CCFC_RSN_Forward ): ssCd = SS_CD_ALL_FWSS; break; case( CCFC_RSN_CondForward ): ssCd = SS_CD_ALL_CFWSS; break; case( CCFC_RSN_NotPresent ): default: ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } /* *------------------------------------------------------------------- * check parameter <class> *------------------------------------------------------------------- */ if( !cmhSS_CheckClassInterr(class_type) ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } /* SIM TOOLKIT & FDN HANDLING */ retVal = cmhSS_CF_SAT_Handle( srcId, reason, CCFC_MOD_Query, NULL, NULL, class_type, NULL, NULL, 0); if( retVal NEQ AT_CMPL ) return( retVal ); /* *------------------------------------------------------------------- * get a new service table entry to interrogate SS *------------------------------------------------------------------- */ sId = psaSS_stbNewEntry(); if( sId EQ NO_ENTRY ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull ); return( AT_FAIL ); } /* *------------------------------------------------------------------- * start first transaction *------------------------------------------------------------------- */ CCD_START; psaSS_asmInterrogateSS( ssCd, SS_NO_PRM, SS_NO_PRM ); ssShrdPrm.stb[sId].ntryUsdFlg = TRUE; ssShrdPrm.stb[sId].ssCode = ssCd; ssShrdPrm.stb[sId].srvOwn = srcId; ssShrdPrm.stb[sId].ClassType = class_type; ssShrdPrm.stb[sId].curCmd = AT_CMD_CCFC; cmhSS_flagTrn( sId, &(cmhPrm[srcId].ssCmdPrm.mltyTrnFlg)); psaSS_NewTrns(sId); CCD_END; /* *------------------------------------------------------------------- * log command execution *------------------------------------------------------------------- */ #if defined SMI OR defined MFW OR defined FF_MMI_RIV { T_ACI_CLOG cmdLog; /* holds logging info */ cmdLog.atCmd = AT_CMD_CCFC; cmdLog.cmdType = CLOG_TYPE_Query; cmdLog.retCode = AT_EXCT; cmdLog.cId = ACI_NumParmNotPresent; cmdLog.sId = sId+1; cmdLog.cmdPrm.qCCFC.srcId = srcId; cmdLog.cmdPrm.qCCFC.reason = reason; cmdLog.cmdPrm.qCCFC.class_type = class_type; rAT_PercentCLOG( &cmdLog ); } #endif return( AT_EXCT ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_SSQ | | STATE : code ROUTINE : qAT_PlusCLCK | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CLCK AT command which is responsible to query the parameters for call barring supplementary services. <fac> : CB facility. <class>: class of basic service. */ GLOBAL T_ACI_RETURN qAT_PlusCLCK ( T_ACI_CMD_SRC srcId, T_ACI_CLCK_FAC fac, T_ACI_CLASS class_type, T_ACI_CLSSTAT *clsStat) { UBYTE dummy_slockStat; TRACE_FUNCTION ("qAT_PlusCLCK"); return qAT_PercentCLCK(srcId,fac,class_type, clsStat,&dummy_slockStat); } /*QAT_PERCENTCLCK add for Simlock in Riviear MFW Added by Shen,Chao April 16th, 2003 */ GLOBAL T_ACI_RETURN qAT_PercentCLCK ( T_ACI_CMD_SRC srcId, T_ACI_CLCK_FAC fac, T_ACI_CLASS class_type, T_ACI_CLSSTAT *clsStat, UBYTE *simClockStat) { SHORT sId; /* holds service id */ UBYTE ssCd; /* holds ss code */ T_ACI_RETURN retVal; #ifdef SIM_PERS T_SIMLOCK_TYPE slocktype; T_SIMLOCK_STATUS rlockstatus; #endif TRACE_FUNCTION ("qAT_PercentCLCK"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } if( cmhPrm[srcId].ssCmdPrm.mltyTrnFlg NEQ 0 ) return( AT_BUSY ); /* *------------------------------------------------------------------- * check parameter <fac> *------------------------------------------------------------------- */ switch( fac ) { case( CLCK_FAC_Ao ): ssCd = SS_CD_BAOC; break; case( CLCK_FAC_Oi ): ssCd = SS_CD_BOIC; break; case( CLCK_FAC_Ox ): ssCd = SS_CD_BOICXH; break; case( CLCK_FAC_Ai ): ssCd = SS_CD_BAIC; break; case( CLCK_FAC_Ir ): ssCd = SS_CD_BICRM; break; case( CLCK_FAC_Ab ): ssCd = SS_CD_ALL_CBSS; break; case( CLCK_FAC_Ag ): ssCd = SS_CD_BOC; break; case( CLCK_FAC_Ac ): ssCd = SS_CD_BIC; break; case( CLCK_FAC_Sc ): case( CLCK_FAC_Fd ): case( CLCK_FAC_Al ): case( CLCK_FAC_Pn ): case( CLCK_FAC_Pu ): case( CLCK_FAC_Pc ): case( CLCK_FAC_Pp ): case( CLCK_FAC_Ps ): case( CLCK_FAC_Pf ): ssCd = NOT_PRESENT_8BIT; break; case( CLCK_FAC_NotPresent ): default: ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } /* *------------------------------------------------------------------- * if action is related to SS *------------------------------------------------------------------- */ if( ssCd NEQ NOT_PRESENT_8BIT ) { /* *------------------------------------------------------------------- * check parameter <class> *------------------------------------------------------------------- */ if( !cmhSS_CheckCbClassInterr(class_type)) { ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotAllow ); return( AT_FAIL ); } if( cmhPrm[srcId].ssCmdPrm.mltyTrnFlg NEQ 0 ) return( AT_BUSY ); /* *------------------------------------------------------------------- * check not allowed <fac> (only possible with mode=0 i.e unlock) *------------------------------------------------------------------- */ if(fac EQ CLCK_FAC_Ab OR fac EQ CLCK_FAC_Ag OR fac EQ CLCK_FAC_Ac) { ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotAllow ); return( AT_FAIL ); } /* SIM TOOLKIT & FDN HANDLING */ retVal = cmhSS_Call_Barr_SAT_Handle( srcId, CLCK_MODE_QUERY, fac, NULL, class_type); if( retVal NEQ AT_CMPL ) return( retVal ); /* *------------------------------------------------------------------- * get a new service table entry to interrogate SS *------------------------------------------------------------------- */ sId = psaSS_stbNewEntry(); if( sId EQ NO_ENTRY ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull ); return( AT_FAIL ); } /* *------------------------------------------------------------------- * start first transaction *------------------------------------------------------------------- */ CCD_START; psaSS_asmInterrogateSS( ssCd, SS_NO_PRM, SS_NO_PRM ); ssShrdPrm.stb[sId].ntryUsdFlg = TRUE; ssShrdPrm.stb[sId].ssCode = ssCd; ssShrdPrm.stb[sId].srvOwn = srcId; ssShrdPrm.stb[sId].ClassType = class_type; ssShrdPrm.stb[sId].curCmd = AT_CMD_CLCK; cmhSS_flagTrn( sId, &(cmhPrm[srcId].ssCmdPrm.mltyTrnFlg)); psaSS_NewTrns(sId); CCD_END; } /* *------------------------------------------------------------------- * if action is related to SIM *------------------------------------------------------------------- */ else { switch (fac) { /* *--------------------------------------------------------------- * access PIN 1 status *--------------------------------------------------------------- */ case CLCK_FAC_Sc: clsStat -> class_type = CLASS_NotPresent; clsStat -> status = STATUS_NotPresent; switch( simShrdPrm.PEDStat ) { case( PEDS_ENA ): clsStat -> status = STATUS_Active; return( AT_CMPL ); case( PEDS_DIS ): clsStat -> status = STATUS_NotActive; return( AT_CMPL ); default: ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_SimFail ); return( AT_FAIL ); } break; /* *--------------------------------------------------------------- * access fixed dialling feature *--------------------------------------------------------------- */ case ( CLCK_FAC_Fd ): clsStat -> class_type = CLASS_NotPresent; clsStat -> status = STATUS_NotPresent; if( simShrdPrm.SIMStat EQ SS_OK ) { switch( simShrdPrm.crdFun ) { case( SIM_ADN_ENABLED ): case( SIM_ADN_BDN_ENABLED ): clsStat -> status = STATUS_NotActive; return( AT_CMPL ); case( SIM_FDN_ENABLED ): case( SIM_FDN_BDN_ENABLED ): clsStat -> status = STATUS_Active; return( AT_CMPL ); case( SIM_NO_OPERATION ): default: ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_SimFail ); return( AT_FAIL ); } } else { ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_SimFail ); return( AT_FAIL ); } break; /* *--------------------------------------------------------------- * lock ALS setting with PIN2 *--------------------------------------------------------------- */ case CLCK_FAC_Al: clsStat -> class_type = CLASS_NotPresent; clsStat -> status = STATUS_NotPresent; switch( ALSlock ) { case( ALS_MOD_SPEECH ): case( ALS_MOD_AUX_SPEECH ): clsStat -> status = STATUS_Active; return( AT_CMPL ); case( ALS_MOD_NOTPRESENT ): clsStat -> status = STATUS_NotActive; return( AT_CMPL ); default: ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotSupp ); return( AT_FAIL ); } break; #ifdef SIM_PERS /* *--------------------------------------------------------------- * ME Personalisation *--------------------------------------------------------------- */ case CLCK_FAC_Pn: case CLCK_FAC_Pu: case CLCK_FAC_Pp: case CLCK_FAC_Pc: case CLCK_FAC_Ps: case CLCK_FAC_Pf: clsStat -> class_type = CLASS_NotPresent; clsStat -> status = STATUS_NotPresent; switch (fac) { case CLCK_FAC_Pn: slocktype = SIMLOCK_NETWORK; break; case CLCK_FAC_Pu: slocktype = SIMLOCK_NETWORK_SUBSET; break; case CLCK_FAC_Pp: slocktype = SIMLOCK_SERVICE_PROVIDER; break; case CLCK_FAC_Pc: slocktype = SIMLOCK_CORPORATE; break; case CLCK_FAC_Ps: slocktype = SIMLOCK_SIM; break; case CLCK_FAC_Pf: slocktype = SIMLOCK_FIRST_SIM; break; default: slocktype = SIMLOCK_NETWORK; } aci_ext_personalisation_init(); rlockstatus = aci_personalisation_get_status(slocktype); /* Changed to aci_personalisatio_get_status from aci_ext_personalisatio_get_status on 11/03/2005 */ aci_ext_personalisation_free(); if (rlockstatus EQ SIMLOCK_ENABLED) { clsStat -> status = STATUS_Active; return( AT_CMPL ); } else if (rlockstatus EQ SIMLOCK_DISABLED) { clsStat -> status = STATUS_NotActive; return( AT_CMPL ); } else { ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_Unknown ); return( AT_FAIL ); } #endif /* *--------------------------------------------------------------- * Error handling *--------------------------------------------------------------- */ default: ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_Unknown ); return( AT_FAIL ); } } /* *------------------------------------------------------------------- * log command execution *------------------------------------------------------------------- */ #if defined SMI OR defined MFW OR defined FF_MMI_RIV { T_ACI_CLOG cmdLog; /* holds logging info */ cmdLog.atCmd = AT_CMD_CLCK; cmdLog.cmdType = CLOG_TYPE_Query; cmdLog.retCode = AT_EXCT; cmdLog.cId = ACI_NumParmNotPresent; cmdLog.sId = sId+1; cmdLog.cmdPrm.qCLCK.srcId = srcId; cmdLog.cmdPrm.qCLCK.fac = fac; cmdLog.cmdPrm.qCLCK.class_type = class_type; rAT_PercentCLOG( &cmdLog ); } #endif return( AT_EXCT ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_SSQ | | STATE : code ROUTINE : qAT_PlusCCWA | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CCWA AT command which is responsible to query the parameters for call waiting supplementary services. <class> : class of basic service. */ GLOBAL T_ACI_RETURN qAT_PlusCCWA (T_ACI_CMD_SRC srcId, T_ACI_CLASS class_type) { SHORT sId; /* holds service id */ T_ACI_RETURN retVal; TRACE_FUNCTION ("qAT_PlusCCWA ()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } if( cmhPrm[srcId].ssCmdPrm.mltyTrnFlg NEQ 0 ) return( AT_BUSY ); /* *------------------------------------------------------------------- * check parameter <class> *------------------------------------------------------------------- */ if( !cmhSS_CheckClassInterr(class_type) ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } /* SIM TOOLKIT & FDN HANDLING */ retVal = cmhSS_CW_SAT_Handle( srcId, CCWA_MOD_Query, class_type); if( retVal NEQ AT_CMPL ) return( retVal ); /* *------------------------------------------------------------------- * get a new service table entry to interrogate SS *------------------------------------------------------------------- */ sId = psaSS_stbNewEntry(); if( sId EQ NO_ENTRY ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull ); return( AT_FAIL ); } /* *------------------------------------------------------------------- * start first transaction *------------------------------------------------------------------- */ CCD_START; psaSS_asmInterrogateSS( SS_CD_CW, SS_NO_PRM, SS_NO_PRM ); ssShrdPrm.stb[sId].ntryUsdFlg = TRUE; ssShrdPrm.stb[sId].ssCode = SS_CD_CW; ssShrdPrm.stb[sId].srvOwn = srcId; ssShrdPrm.stb[sId].ClassType = class_type; ssShrdPrm.stb[sId].curCmd = AT_CMD_CCWA; cmhSS_flagTrn( sId, &(cmhPrm[srcId].ssCmdPrm.mltyTrnFlg)); psaSS_NewTrns(sId); CCD_END; /* *------------------------------------------------------------------- * log command execution *------------------------------------------------------------------- */ #if defined SMI OR defined MFW OR defined FF_MMI_RIV { T_ACI_CLOG cmdLog; /* holds logging info */ cmdLog.atCmd = AT_CMD_CCWA; cmdLog.cmdType = CLOG_TYPE_Query; cmdLog.retCode = AT_EXCT; cmdLog.cId = ACI_NumParmNotPresent; cmdLog.sId = sId+1; cmdLog.cmdPrm.qCCWA.srcId = srcId; cmdLog.cmdPrm.qCCWA.class_type = class_type; rAT_PercentCLOG( &cmdLog ); } #endif return( AT_EXCT ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_SSQ | | STATE : code ROUTINE : qAT_PlusCLIP | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CLIP AT command which is responsible to query the setting for calling line indication supplementary services. <stat> : CLIP status. */ GLOBAL T_ACI_RETURN qAT_PlusCLIP ( T_ACI_CMD_SRC srcId, T_ACI_CLIP_STAT * stat) { SHORT sId; /* holds service id */ T_ACI_RETURN retVal; TRACE_FUNCTION ("qAT_PlusCLIP ()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } /* SIM TOOLKIT & FDN HANDLING */ retVal = cmhSS_CLIP_SAT_Handle( srcId); if( retVal NEQ AT_CMPL ) return( retVal ); /* *------------------------------------------------------------------- * get a new service table entry to interrogate SS *------------------------------------------------------------------- */ sId = psaSS_stbNewEntry(); if( sId EQ NO_ENTRY ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull ); return( AT_FAIL ); } /* *------------------------------------------------------------------- * set up facility information element *------------------------------------------------------------------- */ CCD_START; psaSS_asmInterrogateSS( SS_CD_CLIP, SS_NO_PRM, SS_NO_PRM ); /* *----------------------------------------------------------------- * declare service table entry as used and the owner of the service *----------------------------------------------------------------- */ ssShrdPrm.stb[sId].ntryUsdFlg = TRUE; ssShrdPrm.stb[sId].srvOwn = srcId; /* *------------------------------------------------------------------- * start a new transaction *------------------------------------------------------------------- */ ssShrdPrm.stb[sId].curCmd = AT_CMD_CLIP; psaSS_NewTrns(sId); CCD_END; /* *------------------------------------------------------------------- * log command execution *------------------------------------------------------------------- */ #if defined SMI OR defined MFW OR defined FF_MMI_RIV { T_ACI_CLOG cmdLog; /* holds logging info */ cmdLog.atCmd = AT_CMD_CLIP; cmdLog.cmdType = CLOG_TYPE_Query; cmdLog.retCode = AT_EXCT; cmdLog.cId = ACI_NumParmNotPresent; cmdLog.sId = sId+1; cmdLog.cmdPrm.qCLIP.srcId = srcId; cmdLog.cmdPrm.qCLIP.stat = stat; rAT_PercentCLOG( &cmdLog ); } #endif return( AT_EXCT ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_SSQ | | STATE : code ROUTINE : qAT_PlusCLIR | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CLIR AT command which is responsible to query the setting for calling line restriction supplementary services. <mode> : CLIR mode. <stat> : CLIR status. */ GLOBAL T_ACI_RETURN qAT_PlusCLIR ( T_ACI_CMD_SRC srcId, T_ACI_CLIR_MOD * mode, T_ACI_CLIR_STAT * stat) { SHORT sId; /* holds service id */ T_ACI_RETURN retVal; TRACE_FUNCTION ("qAT_PlusCLIR ()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } /* SIM TOOLKIT & FDN HANDLING */ retVal = cmhSS_CLIR_SAT_Handle( srcId); if( retVal NEQ AT_CMPL ) return( retVal ); /* *------------------------------------------------------------------- * get a new service table entry to interrogate SS *------------------------------------------------------------------- */ sId = psaSS_stbNewEntry(); if( sId EQ NO_ENTRY ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull ); return( AT_FAIL ); } /* *------------------------------------------------------------------- * set up facility information element *------------------------------------------------------------------- */ CCD_START; psaSS_asmInterrogateSS( SS_CD_CLIR, SS_NO_PRM, SS_NO_PRM ); /* *----------------------------------------------------------------- * declare service table entry as used and the owner of the service *----------------------------------------------------------------- */ ssShrdPrm.stb[sId].ntryUsdFlg = TRUE; ssShrdPrm.stb[sId].srvOwn = srcId; /* *------------------------------------------------------------------- * start a new transaction *------------------------------------------------------------------- */ ssShrdPrm.stb[sId].curCmd = AT_CMD_CLIR; psaSS_NewTrns(sId); CCD_END; /* *------------------------------------------------------------------- * log command execution *------------------------------------------------------------------- */ #if defined SMI OR defined MFW OR defined FF_MMI_RIV { T_ACI_CLOG cmdLog; /* holds logging info */ cmdLog.atCmd = AT_CMD_CLIR; cmdLog.cmdType = CLOG_TYPE_Query; cmdLog.retCode = AT_EXCT; cmdLog.cId = ACI_NumParmNotPresent; cmdLog.sId = sId+1; cmdLog.cmdPrm.qCLIR.srcId = srcId; cmdLog.cmdPrm.qCLIR.stat = stat; cmdLog.cmdPrm.qCLIR.mode = mode; rAT_PercentCLOG( &cmdLog ); } #endif return( AT_EXCT ); } GLOBAL T_ACI_RETURN qAT_PercentCLIR ( T_ACI_CMD_SRC srcId, T_ACI_CLIR_MOD * mode) { T_CC_CMD_PRM *pCCCmdPrm; /* points to CC command parameters */ TRACE_FUNCTION ("qAT_PercentCLIR ()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pCCCmdPrm = &cmhPrm[srcId].ccCmdPrm; *mode = pCCCmdPrm->CLIRmode; return AT_CMPL; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_SSQ | | STATE : code ROUTINE : qAT_PlusCOLP | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +COLP AT command which is responsible to query the setting for connected line presentation supplementary services. <stat> : COLP status. */ GLOBAL T_ACI_RETURN qAT_PlusCOLP ( T_ACI_CMD_SRC srcId, T_ACI_COLP_STAT * stat) { SHORT sId; /* holds service id */ T_ACI_RETURN retVal; TRACE_FUNCTION ("qAT_PlusCOLP ()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } /* SIM TOOLKIT & FDN HANDLING */ retVal = cmhSS_COLP_SAT_Handle( srcId); if( retVal NEQ AT_CMPL ) return( retVal ); /* *------------------------------------------------------------------- * get a new service table entry to interrogate SS *------------------------------------------------------------------- */ sId = psaSS_stbNewEntry(); if( sId EQ NO_ENTRY ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull ); return( AT_FAIL ); } /* *------------------------------------------------------------------- * set up facility information element *------------------------------------------------------------------- */ CCD_START; psaSS_asmInterrogateSS( SS_CD_COLP, SS_NO_PRM, SS_NO_PRM ); /* *----------------------------------------------------------------- * declare service table entry as used and the owner of the service *----------------------------------------------------------------- */ ssShrdPrm.stb[sId].ntryUsdFlg = TRUE; ssShrdPrm.stb[sId].srvOwn = srcId; /* *------------------------------------------------------------------- * start a new transaction *------------------------------------------------------------------- */ ssShrdPrm.stb[sId].curCmd = AT_CMD_COLP; psaSS_NewTrns(sId); CCD_END; /* *------------------------------------------------------------------- * log command execution *------------------------------------------------------------------- */ #if defined SMI OR defined MFW OR defined FF_MMI_RIV { T_ACI_CLOG cmdLog; /* holds logging info */ cmdLog.atCmd = AT_CMD_COLP; cmdLog.cmdType = CLOG_TYPE_Query; cmdLog.retCode = AT_EXCT; cmdLog.cId = ACI_NumParmNotPresent; cmdLog.sId = sId+1; cmdLog.cmdPrm.qCOLP.srcId = srcId; cmdLog.cmdPrm.qCOLP.stat = stat; rAT_PercentCLOG( &cmdLog ); } #endif return( AT_EXCT ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_SSQ | | STATE : code ROUTINE : qAT_PercentCOLR | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %COLR AT command which is responsible to query the setting for connected line restriction supplementary services. <stat> : COLR status. */ GLOBAL T_ACI_RETURN qAT_PercentCOLR ( T_ACI_CMD_SRC srcId ) { SHORT sId; /* holds service id */ T_ACI_RETURN retVal; TRACE_FUNCTION ("qAT_PercentCOLR ()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } /* SIM TOOLKIT & FDN HANDLING */ retVal = cmhSS_COLR_SAT_Handle( srcId); if( retVal NEQ AT_CMPL ) return( retVal ); /* *------------------------------------------------------------------- * get a new service table entry to interrogate SS *------------------------------------------------------------------- */ sId = psaSS_stbNewEntry(); if( sId EQ NO_ENTRY ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull ); return( AT_FAIL ); } /* *------------------------------------------------------------------- * set up facility information element *------------------------------------------------------------------- */ CCD_START; psaSS_asmInterrogateSS( SS_CD_COLR, SS_NO_PRM, SS_NO_PRM ); /* *----------------------------------------------------------------- * declare service table entry as used and the owner of the service *----------------------------------------------------------------- */ ssShrdPrm.stb[sId].ntryUsdFlg = TRUE; ssShrdPrm.stb[sId].srvOwn = srcId; /* *------------------------------------------------------------------- * start a new transaction *------------------------------------------------------------------- */ ssShrdPrm.stb[sId].curCmd = AT_CMD_COLR; psaSS_NewTrns(sId); CCD_END; /* *------------------------------------------------------------------- * log command execution *------------------------------------------------------------------- */ #if defined SMI OR defined MFW OR defined FF_MMI_RIV { T_ACI_CLOG cmdLog; /* holds logging info */ cmdLog.atCmd = AT_CMD_COLR; cmdLog.cmdType = CLOG_TYPE_Query; cmdLog.retCode = AT_EXCT; cmdLog.cId = ACI_NumParmNotPresent; cmdLog.sId = sId+1; cmdLog.cmdPrm.qCOLR.srcId = srcId; rAT_PercentCLOG( &cmdLog ); } #endif return( AT_EXCT ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_SSQ | | STATE : code ROUTINE : qAT_PercentCCBS | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %CCBS AT command which is responsible to query the setting for connected line restriction supplementary services. */ GLOBAL T_ACI_RETURN qAT_PercentCCBS ( T_ACI_CMD_SRC srcId ) { SHORT sId; /* holds service id */ T_ACI_RETURN retVal; TRACE_FUNCTION ("qAT_PercentCCBS ()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } /* SIM TOOLKIT & FDN HANDLING */ retVal = cmhSS_CCBS_SAT_Handle( srcId, CCFC_MOD_Query, -1); if( retVal NEQ AT_CMPL ) return( retVal ); /* *------------------------------------------------------------------- * get a new service table entry to interrogate SS *------------------------------------------------------------------- */ sId = psaSS_stbNewEntry(); if( sId EQ NO_ENTRY ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull ); return( AT_FAIL ); } /* *------------------------------------------------------------------- * set up facility information element *------------------------------------------------------------------- */ CCD_START; psaSS_asmInterrogateSS( SS_CD_CCBS, SS_NO_PRM, SS_NO_PRM ); /* *----------------------------------------------------------------- * declare service table entry as used and the owner of the service *----------------------------------------------------------------- */ ssShrdPrm.stb[sId].ntryUsdFlg = TRUE; ssShrdPrm.stb[sId].srvOwn = srcId; /* *------------------------------------------------------------------- * start a new transaction *------------------------------------------------------------------- */ ssShrdPrm.stb[sId].curCmd = AT_CMD_CCBS; psaSS_NewTrns(sId); CCD_END; /* *------------------------------------------------------------------- * log command execution *------------------------------------------------------------------- */ #if defined SMI OR defined MFW OR defined FF_MMI_RIV { T_ACI_CLOG cmdLog; /* holds logging info */ cmdLog.atCmd = AT_CMD_CCBS; cmdLog.cmdType = CLOG_TYPE_Query; cmdLog.retCode = AT_EXCT; cmdLog.cId = ACI_NumParmNotPresent; cmdLog.sId = sId+1; cmdLog.cmdPrm.qCCBS.srcId = srcId; rAT_PercentCLOG( &cmdLog ); } #endif return( AT_EXCT ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_SSQ | | STATE : code ROUTINE : qAT_PercentCNAP | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %CNAP AT command which is responsible to query the setting for calling name presentation supplementary services. */ GLOBAL T_ACI_RETURN qAT_PercentCNAP ( T_ACI_CMD_SRC srcId ) { SHORT sId; /* holds service id */ T_ACI_RETURN retVal; TRACE_FUNCTION ("qAT_PercentCNAP ()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } /* SIM TOOLKIT & FDN HANDLING */ retVal = cmhSS_CNAP_SAT_Handle( srcId); if( retVal NEQ AT_CMPL ) return( retVal ); /* *------------------------------------------------------------------- * get a new service table entry to interrogate SS *------------------------------------------------------------------- */ sId = psaSS_stbNewEntry(); if( sId EQ NO_ENTRY ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull ); return( AT_FAIL ); } /* *------------------------------------------------------------------- * set up facility information element *------------------------------------------------------------------- */ CCD_START; psaSS_asmInterrogateSS( SS_CD_CNAP, SS_NO_PRM, SS_NO_PRM ); /* *----------------------------------------------------------------- * declare service table entry as used and the owner of the service *----------------------------------------------------------------- */ ssShrdPrm.stb[sId].ntryUsdFlg = TRUE; ssShrdPrm.stb[sId].srvOwn = srcId; /* *------------------------------------------------------------------- * start a new transaction *------------------------------------------------------------------- */ ssShrdPrm.stb[sId].curCmd = AT_CMD_CNAP; psaSS_NewTrns(sId); CCD_END; /* *------------------------------------------------------------------- * log command execution *------------------------------------------------------------------- */ #if defined SMI OR defined MFW OR defined FF_MMI_RIV { T_ACI_CLOG cmdLog; /* holds logging info */ cmdLog.atCmd = AT_CMD_CNAP; cmdLog.cmdType = CLOG_TYPE_Query; cmdLog.retCode = AT_EXCT; cmdLog.cId = ACI_NumParmNotPresent; cmdLog.sId = sId+1; cmdLog.cmdPrm.qCCBS.srcId = srcId; rAT_PercentCLOG( &cmdLog ); } #endif return( AT_EXCT ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_SSQ | | STATE : code ROUTINE : qAT_PercentCSCN | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %CSCN AT command which is responsible to query the settings. */ GLOBAL T_ACI_RETURN qAT_PercentCSCN ( T_ACI_CMD_SRC srcId, T_ACI_SS_CSCN_MOD_STATE *ss_switch, T_ACI_SS_CSCN_MOD_DIRECTION *ss_direction, T_ACI_CC_CSCN_MOD_STATE *cc_switch, T_ACI_CC_CSCN_MOD_DIRECTION *cc_direction ) { TRACE_FUNCTION ("qAT_PercentCSCN ()"); if(!cmh_IsVldCmdSrc (srcId)) { /* check command source */ ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } *ss_switch = cmhPrm[srcId].ssCmdPrm.CSCNss_mode.SsCSCNModeState; *ss_direction = cmhPrm[srcId].ssCmdPrm.CSCNss_mode.SsCSCNModeDirection; *cc_switch = cmhPrm[srcId].ccCmdPrm.CSCNcc_mode.CcCSCNModeState; *cc_direction = cmhPrm[srcId].ccCmdPrm.CSCNcc_mode.CcCSCNModeDirection; return( AT_CMPL); } #ifdef SIM_PERS /* +===========================================================+ | PROJECT : GSM-PS (6147) MODULE : CMH_SSQ | | STATE : code ROUTINE : qAT_PercentMEPD | | | |This is the functional counterpart to the %MEPD AT command | |which is responsible to query MEPD Configuration Data. | +===========================================================+ */ GLOBAL T_ACI_RETURN qAT_PercentMEPD( T_ACI_CMD_SRC srcId, T_SUP_INFO *sup_info) { T_OPER_RET_STATUS rlockstatus; TRACE_FUNCTION ("qAT_ PercentMEPD()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } rlockstatus=aci_slock_sup_info(sup_info); if (rlockstatus EQ OPER_SUCCESS) { return (AT_CMPL); } else if (rlockstatus EQ OPER_FAIL) { ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_Unknown); return( AT_FAIL ); } return( AT_EXCT ); } #endif //SIM_PERS /*==== EOF ========================================================*/