FreeCalypso > hg > fc-magnetite

view src/aci2/aci/aci_bat_mm.c @ 600:8f50b202e81f

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
board preprocessor conditionals: prep for more FC hw in the future This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and all preprocessor conditionals throughout the code base that tested for it, replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These new symbols are specified as follows: CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by Mother Mychaela under the FreeCalypso trademark. This family will include modem products (repackagings of the FCDEV3B, possibly with RFFE or even RF transceiver changes), and also my desired FreeCalypso handset product. CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products (which will be firmware-compatible with the FCDEV3B if they use TI Rita transceiver, or will require a different fw build if we switch to one of Silabs Aero transceivers), but not the handset product. Right now this CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize everything dealing with MCSI. At the present moment the future of FC hardware evolution is still unknown: it is not known whether we will ever have any beyond-FCDEV3B hardware at all (contingent on uncertain funding), and if we do produce further FC hardware designs, it is not known whether they will retain the same FIC modem core (triband), if we are going to have a quadband design that still retains the classic Rita transceiver, or if we are going to switch to Silabs Aero II or some other transceiver. If we produce a quadband modem that still uses Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination, and the current fcdev3b build target will be renamed to fcmodem. OTOH, if that putative quadband modem will be Aero-based, then it will require a different fw build target, the fcdev3b target will stay as it is, and the two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM, but will have different RF_FAM numbers. But no matter which way we are going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B in places like ACI, and the present change clears the way for future evolution.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 01 Apr 2019 01:05:24 +0000
parents 93999a60b835
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  ACI_BAT
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved. 
|
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This BAT wrapper modul is ...
| 
+----------------------------------------------------------------------------- 
*/ 

#include "aci_all.h"     /* includes prim.h, which includes p_bat.h */ 
#include "aci_cmh.h"     /* prototypes of sAT_,qAT_,tAT_    */ 
#include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ 

#ifdef FF_ATI_BAT
#include "typedefs.h"
#include "gdd.h"
#include "bat.h"
#include "aci_bat.h"
#endif /* FF_ATI_BAT */

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCOPS        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
#undef  min
#define min(a,b) ((a) < (b) ? (a) : (b)) /* from gpf\inc\vcms */

GLOBAL T_ACI_BAT_RSLT sBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  U8   c_oper = cmd->params.ptr_set_plus_cops->c_oper;
  CHAR op[MAX_ALPHA_OPER_LEN] = {0};
  
  TRACE_FUNCTION ("sBAT_PlusCOPS()");

  c_oper = min(c_oper, MAX_ALPHA_OPER_LEN);

  if (cmd->params.ptr_set_plus_cops->v_oper EQ TRUE)
    memcpy(op, cmd->params.ptr_set_plus_cops->oper, c_oper);
  
  ret = sAT_PlusCOPS (src_infos_psi->srcId,
                      cmd->params.ptr_set_plus_cops->mode,
                      cmd->params.ptr_set_plus_cops->format, op);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCOPS        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  CHAR op[MAX_ALPHA_OPER_LEN] = {0};

  T_ACI_COPS_MOD  mode = COPS_MOD_NotPresent;
  T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_cops cops;

  TRACE_FUNCTION ("qBAT_PlusCOPS()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_COPS;
  resp.response.ptr_que_plus_cops = &cops;

  ret = qAT_PlusCOPS(src_infos_psi->srcId, &mode, &format, op);

  cops.mode    = mode;
  cops.format  = format;
  cops.c_oper  = strlen(op);
  cops.v_oper  = cops.c_oper ? TRUE : FALSE;

  if (cops.v_oper)
  {
    memcpy(cops.oper, op, cops.c_oper);
  }
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : tBAT_PlusCOPS        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT tBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_COPS_LST operLst;
  T_BAT_cmd_response resp = {0};
  T_BAT_res_tst_plus_cops *pTPC = resp.response.ptr_tst_plus_cops;

  SHORT startIdx = 0, lastIdx = 0;
  BOOL END_OF_LIST = FALSE;

  TRACE_FUNCTION ("tBAT_PlusCOPS()");

  resp.ctrl_response = BAT_RES_TST_PERCENT_COPS;
  
  do
  {
    int i;

    startIdx += lastIdx;
    ret = tAT_PlusCOPS(src_infos_psi->srcId, startIdx, &lastIdx, &operLst[0]);
    if (ret NEQ ACI_BAT_CMPL)
      return (ret);
    
    for (i = 0; i < lastIdx; i++)
    {
      if ((operLst[i].status EQ COPS_STAT_NotPresent) AND (*operLst[i].numOper EQ 0))
      {
        END_OF_LIST = TRUE;
        break;
      }
      /* Fill BAT resp structs */
      pTPC->status = operLst[i].status;
      pTPC->c_short_oper = strlen(operLst[i].shortOper);
      pTPC->c_long_oper = strlen(operLst[i].longOper);
      pTPC->c_num_oper = strlen(operLst[i].numOper);

      /* Check if there is long operator name, set valid flag and store it. */
      if(pTPC->c_long_oper)
      {
        pTPC->v_long_oper = TRUE;
        strncpy((CHAR*)pTPC->long_oper, operLst[i].longOper, pTPC->c_long_oper);
      }

      /* Check if there is short operator name, set valid flag and store it. */
      if(pTPC->c_short_oper)
      {
        pTPC->v_short_oper = TRUE;
        strncpy((CHAR*)pTPC->short_oper, operLst[i].shortOper, pTPC->c_short_oper);
      }

      /* Check if there is num operator name, set valid flag and store it. */
      if(pTPC->c_num_oper)
      {
        pTPC->v_num_oper = TRUE;
        strncpy((CHAR*)pTPC->num_oper, operLst[i].numOper, pTPC->c_num_oper);
      }

      aci_bat_send(src_infos_psi, &resp);
    }
    return (ACI_BAT_CMPL);
  } while(!END_OF_LIST);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCOPS     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  U8   c_oper = cmd->params.ptr_set_percent_cops->c_oper;
  CHAR op[MAX_ALPHA_OPER_LEN] = {0};

  TRACE_FUNCTION ("sBAT_PercentCOPS()");

  c_oper = min(c_oper, MAX_ALPHA_OPER_LEN);

  if (cmd->params.ptr_set_percent_cops->v_oper EQ TRUE)
    memcpy(op, cmd->params.ptr_set_percent_cops->oper, c_oper);

  ret = sAT_PercentCOPS (src_infos_psi->srcId,
                         cmd->params.ptr_set_percent_cops->mode,
                         cmd->params.ptr_set_percent_cops->format, op);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : tBAT_PercentCOPS     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT tBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_COPS_LST operLst;
  T_BAT_cmd_response resp = {0};
  T_BAT_res_tst_percent_cops *pTPC = resp.response.ptr_tst_percent_cops;

  SHORT startIdx = 0, lastIdx = 0;
  BOOL END_OF_LIST = FALSE;

  TRACE_FUNCTION ("tBAT_PercentCOPS()");

  resp.ctrl_response = BAT_RES_TST_PERCENT_COPS;
  
  do
  {
    int i;

    startIdx += lastIdx;
    ret = tAT_PlusCOPS(src_infos_psi->srcId, startIdx, &lastIdx, &operLst[0]);
    if (ret NEQ ACI_BAT_CMPL)
      return (ret);
    
    for (i = 0; i < lastIdx; i++)
    {
      if ((operLst[i].status EQ COPS_STAT_NotPresent) AND (*operLst[i].numOper EQ 0))
      {
        END_OF_LIST = TRUE;
        break;
      }
      /* Fill BAT resp structs */
      pTPC->status = operLst[i].status;
      pTPC->c_short_oper = strlen(operLst[i].shortOper);
      pTPC->c_long_oper = strlen(operLst[i].longOper);
      pTPC->c_num_oper = strlen(operLst[i].numOper);

      /* Check if there is long operator name, set valid flag and store it. */
      if(pTPC->c_long_oper)
      {
        pTPC->v_long_oper = TRUE;
        strncpy((CHAR*)pTPC->long_oper, operLst[i].longOper, pTPC->c_long_oper);
      }

      /* Check if there is short operator name, set valid flag and store it. */
      if(pTPC->c_short_oper)
      {
        pTPC->v_short_oper = TRUE;
        strncpy((CHAR*)pTPC->short_oper, operLst[i].shortOper, pTPC->c_short_oper);
      }

      /* Check if there is num operator name, set valid flag and store it. */
      if(pTPC->c_num_oper)
      {
        pTPC->v_num_oper = TRUE;
        strncpy((CHAR*)pTPC->num_oper, operLst[i].numOper, pTPC->c_num_oper);
      }

      aci_bat_send(src_infos_psi, &resp);
    }
    return (ACI_BAT_CMPL);
  } while(!END_OF_LIST);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCOPS     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  CHAR op[MAX_ALPHA_OPER_LEN] = {0};

  T_ACI_COPS_MOD  mode = COPS_MOD_NotPresent;
  T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent;
  T_ACI_COPS_SVST svrStatus = COPS_SVST_NotPresent;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_cops cops;

  TRACE_FUNCTION ("qBAT_PercentCOPS()");

  resp.ctrl_response = BAT_RES_QUE_PERCENT_COPS;
  resp.response.ptr_que_percent_cops = &cops;

  ret = qAT_PercentCOPS(src_infos_psi->srcId, &mode, &format, &svrStatus, op);

  cops.mode    = mode;
  cops.format  = format;
  cops.service = svrStatus;
  cops.c_oper  = strlen(op);
  cops.v_oper  = cops.c_oper ? TRUE : FALSE;
  
  if (cops.v_oper)
  {
    memcpy(cops.oper, op, cops.c_oper);
  }
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCREG     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCREG(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_creg creg;

  TRACE_FUNCTION ("qBAT_PercentCREG()");
  
  resp.ctrl_response = BAT_RES_QUE_PERCENT_CREG;
  resp.response.ptr_que_percent_creg = &creg;

  ret = qAT_PercentCREG(src_infos_psi->srcId, 
                        (T_ACI_CREG_STAT*)&creg.stat,
                        (USHORT*)&creg.lac,
                        (USHORT*)&creg.ci,
                        (T_ACI_P_CREG_GPRS_IND*)&creg.gprs_ind);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusWS46        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusWS46(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_plus_ws46_n mode = cmd->params.ptr_set_plus_ws46->n;

  TRACE_FUNCTION ("sBAT_PlusWS46()");

  ret = sAT_PlusWS46(src_infos_psi->srcId, mode);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusWS46        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusWS46(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_ws46 ws46;

  TRACE_FUNCTION ("qBAT_PlusWS46()");
  
  resp.ctrl_response = BAT_RES_QUE_PLUS_WS46;
  resp.response.ptr_que_plus_ws46 = &ws46;

  ret = qAT_PlusWS46(src_infos_psi->srcId, (T_ACI_WS46_MOD *)&ws46.n);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCHPL     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCHPL(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_OPER_NTRY oper;
  UBYTE len;
    
  TRACE_FUNCTION ("sBAT_PercentCHPL()");

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)sAT_PercentCHPL(src_infos_psi->srcId,&oper);

  /*
  *   If the command completes, we must send a response.
  */
  if (ret==ACI_BAT_CMPL)
  {
    T_BAT_cmd_response resp;
    T_BAT_res_set_percent_chpl chpl_data;

    resp.ctrl_response=BAT_RES_SET_PERCENT_CHPL;
    resp.response.ptr_set_percent_chpl=&chpl_data;

    chpl_data.type=BAT_P_CHPL_TYPE_FROM_IMS;

    switch (cmd->params.ptr_set_percent_chpl->oprfrmt)
    {
      case BAT_P_CHPL_OPRFRMT_LONG:
        len=strlen(oper.longName);

        if (len<=BAT_MAX_CHPL_OPER_LEN)
        {
          memcpy(chpl_data.oper,oper.longName,len);
          chpl_data.c_oper=(U8)len;
        }
        else
        {
          return(ACI_BAT_FAIL);
        }
        break;

      case BAT_P_CHPL_OPRFRMT_SHORT:
        len=strlen(oper.shrtName);

        if (len<=BAT_MAX_CHPL_OPER_LEN)
        {
          memcpy(chpl_data.oper,oper.shrtName,len);
          chpl_data.c_oper=(U8)len;
        }
        else
        {
          return(ACI_BAT_FAIL);
        }
        break;
 
      case BAT_P_CHPL_OPRFRMT_NUMERIC:
        /*
        *   Representation of the numeric format as in the ATI.
        */
        if ((oper.mnc & 0x00F)==0xF)
          sprintf((char *)chpl_data.oper, "%03x,%02x",oper.mcc, oper.mnc >> 4);
        else
          sprintf((char *)chpl_data.oper, "%03x,%03x",oper.mcc, oper.mnc);

        chpl_data.c_oper=(U8)strlen((char *)chpl_data.oper);
        break;

      default:
        return(ACI_BAT_FAIL);
        break;
    }

    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCTZU        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCTZU(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusCTZU()");

  ret = sAT_PlusCTZU (src_infos_psi->srcId, cmd->params.ptr_set_plus_ctzu->onoff);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCTZU        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCTZU(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_ctzu ctzu;
  
  TRACE_FUNCTION ("qBAT_PlusCTZU()");
  
  resp.ctrl_response = BAT_RES_QUE_PLUS_CTZU;
  resp.response.ptr_que_plus_ctzu = &ctzu;
  ret = qAT_PlusCTZU(src_infos_psi->srcId, (T_ACI_CTZU_MODE*)&ctzu.onoff);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCWUP     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCWUP(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;

  TRACE_FUNCTION ("sBAT_PercentCWUP()");

  ret = sAT_PercentCWUP (src_infos_psi->srcId, cmd->params.ptr_set_percent_cwup->type);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCTZV     |
+--------------------------------------------------------------------+

  PURPOSE : %CTZV command mode (time and date report)
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCTZV (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                        T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PercentCTZV()");

  ret = sAT_PercentCTZV (src_infos_psi->srcId, 
                         (T_ACI_PCTZV_MODE)cmd->params.ptr_set_percent_ctzv->mode);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCIND        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCIND(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusCIND()");
  
  ret = sAT_PlusCIND( src_infos_psi->srcId,
                      cmd->params.ptr_set_plus_cind->signal_ctrl,
                      cmd->params.ptr_set_plus_cind->smsfull_ctrl);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCIND        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCIND(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_cind cind;

  TRACE_FUNCTION ("qBAT_PlusCIND()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_CIND;
  resp.response.ptr_que_plus_cind = &cind;

  ret = qAT_PlusCIND(src_infos_psi->srcId,
               (T_ACI_CIND_SIGNAL_TYPE*)&cind.signal, 
               (T_ACI_CIND_SMSFULL_TYPE*)&cind.smsfull); 

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCMER        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCMER(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  T_ACI_CMER_MODE_TYPE sCmerModeSettings = CMER_MODE_INVALID;
  T_ACI_CMER_IND_TYPE  sCmerIndicationSettings = CMER_INDICATOR_INVALID;
  T_ACI_CMER_BFR_TYPE  sCmerBfrSettings = CMER_BFR_INVALID;

  TRACE_FUNCTION ("sBAT_PlusCMER()");
  
  switch (cmd->params.ptr_set_plus_cmer->ind_option)
  {
  case BAT_CMER_IND_OPTION_LOWER:
    ret = sAT_PlusCMER(src_infos_psi->srcId,
                       sCmerModeSettings,
                       sCmerIndicationSettings,
                       sCmerBfrSettings);
    break;

  case BAT_CMER_IND_OPTION_GREATER_EQUAL:
    ret = sAT_PlusCMER(src_infos_psi->srcId,
                       sCmerModeSettings,
                       sCmerIndicationSettings,
                       sCmerBfrSettings);
    break;

  case BAT_CMER_IND_OPTION_NOT_PRESENT:
  default:
    return ACI_BAT_FAIL;
    break;
  }
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCMER        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCMER(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_cmer cmer;

  T_ACI_CMER_MODE_TYPE sCmerModeSettings;
  T_ACI_CMER_IND_TYPE  sCmerIndicationSettings;
  T_ACI_CMER_BFR_TYPE  sCmerBfrSettings;

  TRACE_FUNCTION ("qBAT_PlusCMER()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_CMER;
  resp.response.ptr_que_plus_cmer = &cmer;

  ret = qAT_PlusCMER(src_infos_psi->srcId,
                     &sCmerModeSettings,
                     &sCmerIndicationSettings,
                     &sCmerBfrSettings);

  switch (cmd->params.ptr_que_plus_cmer->bat_dummy)
  {
  default:
    break;
  }
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}