FreeCalypso > hg > fc-magnetite

view src/aci2/aci/aci_bat_fd.c @ 600:8f50b202e81f

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
board preprocessor conditionals: prep for more FC hw in the future This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and all preprocessor conditionals throughout the code base that tested for it, replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These new symbols are specified as follows: CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by Mother Mychaela under the FreeCalypso trademark. This family will include modem products (repackagings of the FCDEV3B, possibly with RFFE or even RF transceiver changes), and also my desired FreeCalypso handset product. CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products (which will be firmware-compatible with the FCDEV3B if they use TI Rita transceiver, or will require a different fw build if we switch to one of Silabs Aero transceivers), but not the handset product. Right now this CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize everything dealing with MCSI. At the present moment the future of FC hardware evolution is still unknown: it is not known whether we will ever have any beyond-FCDEV3B hardware at all (contingent on uncertain funding), and if we do produce further FC hardware designs, it is not known whether they will retain the same FIC modem core (triband), if we are going to have a quadband design that still retains the classic Rita transceiver, or if we are going to switch to Silabs Aero II or some other transceiver. If we produce a quadband modem that still uses Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination, and the current fcdev3b build target will be renamed to fcmodem. OTOH, if that putative quadband modem will be Aero-based, then it will require a different fw build target, the fcdev3b target will stay as it is, and the two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM, but will have different RF_FAM numbers. But no matter which way we are going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B in places like ACI, and the present change clears the way for future evolution.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 01 Apr 2019 01:05:24 +0000
parents 93999a60b835
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-F&D (8411)
|  Modul   :  ACI_BAT
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This BAT wrapper modul is ...
|
+-----------------------------------------------------------------------------
*/

#include "aci_all.h"     /* includes prim.h, which includes p_bat.h */
#include "aci_cmh.h"     /* prototypes of sAT_, qAT_, tAT_    */
#include "aci_bat_cmh.h" /* prototypes of sBAT_, qBAT_, tBAT_ */
#include "aci_bat.h"
#include "aci_fd.h"

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : BAT_O                |
+--------------------------------------------------------------------+

  PURPOSE :
*/
GLOBAL T_ACI_BAT_RSLT BAT_O(T_ACI_DTI_PRC_PSI *src_infos_psi,
                            T_BAT_cmd_send    *cmd)
{
  TRACE_FUNCTION ("BAT_O()");
  return(ACI_BAT_FAIL);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusDS          |
+--------------------------------------------------------------------+

  PURPOSE : V.42bis data compression functions
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusDS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                  T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusDS()");

  ret = sAT_PlusDS( src_infos_psi->srcId,
                    cmd->params.ptr_set_plus_ds->dir,
                    cmd->params.ptr_set_plus_ds->neg,
                    cmd->params.ptr_set_plus_ds->p1,
                    cmd->params.ptr_set_plus_ds->p2);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusDS          |
+--------------------------------------------------------------------+

  PURPOSE : V.42bis data compression functions
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusDS          (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_ds ds;

  TRACE_FUNCTION ("qBAT_PlusDS()");
  resp.ctrl_response = BAT_RES_QUE_PLUS_DS;
  resp.response.ptr_que_plus_ds = &ds;

  ret = qAT_PlusDS( src_infos_psi->srcId,(T_ACI_DS_DIR*)&ds.dir,(T_ACI_DS_COMP*)&ds.neg,(LONG*)&ds.p1,(SHORT*)&ds.p2);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCRLP        |
+--------------------------------------------------------------------+

  PURPOSE : Radio link protocol
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCRLP(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusCRLP()");

  ret = sAT_PlusCRLP(src_infos_psi->srcId,
                     (S16)cmd->params.ptr_set_plus_crlp->iws,
                     (S16)cmd->params.ptr_set_plus_crlp->mws,
                     (S16)cmd->params.ptr_set_plus_crlp->t1,
                     (S16)cmd->params.ptr_set_plus_crlp->n2);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCRLP        |
+--------------------------------------------------------------------+

  PURPOSE : Radio link protocol
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCRLP(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_crlp crlp;

  TRACE_FUNCTION ("qBAT_PlusCRLP()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_CRLP;
  resp.response.ptr_que_plus_crlp = &crlp;

  ret = qAT_PlusCRLP( src_infos_psi->srcId,
                      (SHORT*)&crlp.iws, (SHORT*)&crlp.mws, (SHORT*)&crlp.t1, (SHORT*)&crlp.n2);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

#ifdef FF_FAX

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFAP         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFAP(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFAP()");

  ret = sAT_PlusFAP(src_infos_psi->srcId, 
                    cmd->params.ptr_set_plus_fap->sub,
                    cmd->params.ptr_set_plus_fap->sep,
                    cmd->params.ptr_set_plus_fap->pwd);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFAP         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFAP(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fap fap;
  
  TRACE_FUNCTION ("qBAT_PlusFAP()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FAP;
  resp.response.ptr_que_plus_fap = &fap;

  ret = qAT_PlusFAP(src_infos_psi->srcId,(T_ACI_FAP_VAL*)&fap.sub,(T_ACI_FAP_VAL*)&fap.sep,(T_ACI_FAP_VAL*)&fap.pwd);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFBO         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFBO(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFBO()");

  ret = sAT_PlusFBO(src_infos_psi->srcId, 
                    cmd->params.ptr_set_plus_fbo->value);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFBO         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFBO(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fbo fbo;

  TRACE_FUNCTION ("qBAT_PlusFBO()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FBO;
  resp.response.ptr_que_plus_fbo  = &fbo;

  ret = qAT_PlusFBO(src_infos_psi->srcId, (T_ACI_FBO_VAL*)&fbo.value);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFBS         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFBS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fbs fbs;

  TRACE_FUNCTION ("qBAT_PlusFBS()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FBS; 
  resp.response.ptr_que_plus_fbs = &fbs;

  ret = qAT_PlusFBS(src_infos_psi->srcId, (S16*)&fbs.tbs, (S16*)&fbs.rbs);
  
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFBU         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFBU(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;

  TRACE_FUNCTION ("sBAT_PlusFBU(): is obsolete <=== !!! consult KJF");

  /*
  ret = sAT_PlusFBU(src_infos_psi->srcId, 
                    cmd->params.ptr_set_plus_fbu->value);
  */

  ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotSupp);
  
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFBU         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFBU(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fbu fbu;

  TRACE_FUNCTION ("qBAT_PlusFBU()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FBU;
  resp.response.ptr_que_plus_fbu = &fbu;
  
  //???ret = qAT_PlusFBU(src_infos_psi->srcId, &fbu.val);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFCC         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFCC(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  
  T_BAT_cmd_set_plus_fcc *fcc = cmd->params.ptr_set_plus_fcc;

  TRACE_FUNCTION ("sBAT_PlusFCC()");

  ret = sAT_PlusFCC(src_infos_psi->srcId,
                    fcc->vr,
                    fcc->br,
                    fcc->wd,
                    fcc->ln,
                    fcc->df,
                    fcc->ec,
                    fcc->bf,
                    fcc->st,
                    fcc->jp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFCC         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFCC(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fcc fcc;

  TRACE_FUNCTION ("qBAT_PlusFCC()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FCC;
  resp.response.ptr_que_plus_fcc = &fcc;

  ret = qAT_PlusFCC(src_infos_psi->srcId,
                    (T_ACI_F_VR*)&fcc.vr,
                    (T_ACI_F_BR*)&fcc.br,
                    (T_ACI_F_WD*)&fcc.wd,
                    (T_ACI_F_LN*)&fcc.ln,
                    (T_ACI_F_DF*)&fcc.df,
                    (T_ACI_F_EC*)&fcc.ec,
                    (T_ACI_F_BF*)&fcc.bf,
                    (T_ACI_F_ST*)&fcc.st,
                    (T_ACI_F_JP*)&fcc.jp);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFCLASS      |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFCLASS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                      T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFCLASS()");

  ret = sAT_PlusFCLASS(src_infos_psi->srcId,
                       cmd->params.ptr_set_plus_fclass->n); 
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFCLASS      |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFCLASS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                      T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fclass fclass;

  TRACE_FUNCTION ("qBAT_PlusFCLASS()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FCLASS;
  resp.response.ptr_que_plus_fclass = &fclass;

  ret = qAT_PlusFCLASS(src_infos_psi->srcId, (T_ACI_FCLASS_CLASS*)&fclass.n); 

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFCQ         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFCQ(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFCQ()");

  ret = sAT_PlusFCQ(src_infos_psi->srcId,
                    cmd->params.ptr_set_plus_fcq->rq,
                    cmd->params.ptr_set_plus_fcq->tq);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFCQ         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFCQ(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fcq fcq;

  TRACE_FUNCTION ("qBAT_PlusFCQ()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FCQ;
  resp.response.ptr_que_plus_fcq = &fcq;

  ret = qAT_PlusFCQ(src_infos_psi->srcId,(T_ACI_FCQ_RQ*)&fcq.rq,(T_ACI_FCQ_TQ*)&fcq.tq); 

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFCR         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFCR(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFCR()");

  ret = sAT_PlusFCR(src_infos_psi->srcId,
                    cmd->params.ptr_set_plus_fcr->value);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFCR         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFCR(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fcr fcr;

  TRACE_FUNCTION ("qBAT_PlusFCR()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FCR;
  resp.response.ptr_que_plus_fcr = &fcr;

  ret = qAT_PlusFCR(src_infos_psi->srcId,(T_ACI_FCR_VAL*)&fcr.value); 

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFCS         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFCS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fcs fcs;

  TRACE_FUNCTION ("qBAT_PlusFCS()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FCS;
  resp.response.ptr_que_plus_fcs = &fcs;

  ret = qAT_PlusFCS(src_infos_psi->srcId,
                    (T_ACI_F_VR*)&fcs.vr,
                    (T_ACI_F_BR*)&fcs.br,
                    (T_ACI_F_WD*)&fcs.wd,
                    (T_ACI_F_LN*)&fcs.ln,
                    (T_ACI_F_DF*)&fcs.df,
                    (T_ACI_F_EC*)&fcs.ec,
                    (T_ACI_F_BF*)&fcs.bf,
                    (T_ACI_F_ST*)&fcs.st,
                    (T_ACI_F_JP*)&fcs.jp); 

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFEA         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFEA(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;

  TRACE_FUNCTION ("sBAT_PlusFEA(): is obsolete <=== !!! consult KJF");
  /* adjust the left hand side
    xxx = cmd->params.ptr_set_plus_fea->value;
  */
  /* hmm, do not know which ACI function to call ! */
  ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotSupp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFEA         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFEA(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;

  TRACE_FUNCTION ("qBAT_PlusFEA(): is obsolete <=== !!! consult KJF");
  /* hmm, do not know which ACI function to call ! */
  ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotSupp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFFC         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFFC(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  T_BAT_cmd_set_plus_ffc *ffc = cmd->params.ptr_set_plus_ffc;

  TRACE_FUNCTION ("sBAT_PlusFFC()");

  ret = sAT_PlusFFC(src_infos_psi->srcId,
                    ffc->vrc,
                    ffc->dfc,
                    ffc->lnc,
                    ffc->wdc);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFFC         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFFC(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_ffc ffc;

  TRACE_FUNCTION ("qBAT_PlusFFC()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FFC;
  resp.response.ptr_que_plus_ffc = &ffc;

  ret = qAT_PlusFFC(src_infos_psi->srcId,
                    (T_ACI_FFC_VRC*)&ffc.vrc,(T_ACI_FFC_DFC*)&ffc.dfc,(T_ACI_FFC_LNC*)&ffc.lnc,(T_ACI_FFC_WDC*)&ffc.wdc);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFHS         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFHS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fhs fhs;

  TRACE_FUNCTION ("qBAT_PlusFHS()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FHS;
  resp.response.ptr_que_plus_fhs = &fhs;

  ret = qAT_PlusFHS(src_infos_psi->srcId, (T_ACI_FHS_STAT*)&fhs.status); 

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFIE         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFIE(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFIE()");

  ret = sAT_PlusFIE(src_infos_psi->srcId,
                    cmd->params.ptr_set_plus_fie->value);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFIE         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFIE(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;

  T_BAT_res_que_plus_fie fie;

  TRACE_FUNCTION ("qBAT_PlusFIE()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FIE;
  resp.response.ptr_que_plus_fie = &fie;

  ret = qAT_PlusFIE(src_infos_psi->srcId, (T_ACI_FIE_VAL*)&fie.value); 
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFIS         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFIS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  T_BAT_cmd_set_plus_fis *fis = cmd->params.ptr_set_plus_fis;

  TRACE_FUNCTION ("sBAT_PlusFIS()");

  ret = sAT_PlusFIS(src_infos_psi->srcId,
                    fis->vr,
                    fis->br,
                    fis->wd,
                    fis->ln,
                    fis->df,
                    fis->ec,
                    fis->bf,
                    fis->st,
                    fis->jp); 
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFIS         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFIS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;

  T_BAT_res_que_plus_fis fis;

  TRACE_FUNCTION ("qBAT_PlusFIS()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FIS;
  resp.response.ptr_que_plus_fis = &fis;

  ret = qAT_PlusFIS(src_infos_psi->srcId,
                    (T_ACI_F_VR*)&fis.vr,
                    (T_ACI_F_BR*)&fis.br,
                    (T_ACI_F_WD*)&fis.wd,
                    (T_ACI_F_LN*)&fis.ln,
                    (T_ACI_F_DF*)&fis.df,
                    (T_ACI_F_EC*)&fis.ec,
                    (T_ACI_F_BF*)&fis.bf,
                    (T_ACI_F_ST*)&fis.st,
                    (T_ACI_F_JP*)&fis.jp); 

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFLI         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFLI(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFLI()");
 
  ret = sAT_PlusFLI(src_infos_psi->srcId,
                    (CHAR*)cmd->params.ptr_set_plus_fli->id_str);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFLI         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFLI(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fli fli;

  TRACE_FUNCTION ("qBAT_PlusFLI()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FLI;
  resp.response.ptr_que_plus_fli = &fli;
  
  ret = qAT_PlusFLI(src_infos_psi->srcId, (CHAR*)fli.id_str);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFLO         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFLO(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFLO()");

  ret = sAT_PlusIFC(src_infos_psi->srcId,
                    cmd->params.ptr_set_plus_flo->flo_c,
                    cmd->params.ptr_set_plus_flo->flo_c); 
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFLO         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFLO(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_flo flo;
  T_ACI_RX_FLOW_CTRL DCE_by_DTE;
  T_ACI_RX_FLOW_CTRL DTE_by_DCE;
  
  TRACE_FUNCTION ("qBAT_PlusFLO()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FLO;
  resp.response.ptr_que_plus_flo = &flo;

  ret = qAT_PlusIFC(src_infos_psi->srcId, &DCE_by_DTE, &DTE_by_DCE);

  flo.flo_q = DCE_by_DTE;

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFLP         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFLP(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFLP()");

  ret = sAT_PlusFLP(src_infos_psi->srcId,
                    cmd->params.ptr_set_plus_flp->value);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFLP         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFLP(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_flp flp;

  TRACE_FUNCTION ("qBAT_PlusFLP()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FLP;
  resp.response.ptr_que_plus_flp = &flp;

  ret = qAT_PlusFLP(src_infos_psi->srcId, (T_ACI_FLP_VAL*)&flp.value);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFMS         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFMS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFMS()");

  ret = sAT_PlusFMS(src_infos_psi->srcId,
                    cmd->params.ptr_set_plus_fms->value); 
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFMS         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFMS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fms fms;

  TRACE_FUNCTION ("qBAT_PlusFMS()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FMS;
  resp.response.ptr_que_plus_fms = &fms;

  ret = qAT_PlusFMS(src_infos_psi->srcId, (T_ACI_F_BR*)&fms.value);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFNS         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFNS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFNS()");

  ret = sAT_PlusFNS(src_infos_psi->srcId,
                    cmd->params.ptr_set_plus_fns->c_nsf,
                    cmd->params.ptr_set_plus_fns->nsf); 
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFNS         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFNS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fns fns;

  TRACE_FUNCTION ("qBAT_PlusFNS()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FNS;
  resp.response.ptr_que_plus_fns = &fns;
  
  ret = qAT_PlusFNS(src_infos_psi->srcId, &fns.c_nsf, fns.nsf);
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFPA         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFPA(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFPA()");
  ret = sAT_PlusFPA(src_infos_psi->srcId,
                    (CHAR*)cmd->params.ptr_set_plus_fpa->spa_str); 
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFPA         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFPA(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fpa fpa;

  TRACE_FUNCTION ("qBAT_PlusFPA()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FPA;
  resp.response.ptr_que_plus_fpa = &fpa;

  ret = qAT_PlusFPA(src_infos_psi->srcId, (CHAR*)fpa.spa_str);
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFPI         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFPI(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFPI()");

  ret = sAT_PlusFPI(src_infos_psi->srcId,
                    (CHAR*)cmd->params.ptr_set_plus_fpi->id_str);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFPI         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFPI(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fpi fpi;

  TRACE_FUNCTION ("qBAT_PlusFPI()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FPI;
  resp.response.ptr_que_plus_fpi = &fpi;

  ret = qAT_PlusFPI(src_infos_psi->srcId, (CHAR*)fpi.id_str); 
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFPS         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFPS()");

  ret = sAT_PlusFPS(src_infos_psi->srcId,
                    cmd->params.ptr_set_plus_fps->ppr);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFPS         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fps fps;

  TRACE_FUNCTION ("qBAT_PlusFPS()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FPS;
  resp.response.ptr_que_plus_fps = &fps;

  ret = qAT_PlusFPS(src_infos_psi->srcId, (T_ACI_FPS_PPR*)&fps.ppr); 
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFPW         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFPW(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFPW()");

  ret = sAT_PlusFPW(src_infos_psi->srcId,
                    (CHAR*)cmd->params.ptr_set_plus_fpw->pw_str);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFPW         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFPW(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fpw fpw;

  TRACE_FUNCTION ("qBAT_PlusFPW()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FPW;
  resp.response.ptr_que_plus_fpw = &fpw;
  
  ret = qAT_PlusFPW(src_infos_psi->srcId,(CHAR*)fpw.pw_str);
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFRQ         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFRQ(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFRQ()");

  ret = sAT_PlusFRQ(src_infos_psi->srcId,
                    cmd->params.ptr_set_plus_frq->pgl,
                    cmd->params.ptr_set_plus_frq->cbl);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFRQ         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFRQ(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_frq frq;

  TRACE_FUNCTION ("qBAT_PlusFRQ()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FRQ;
  resp.response.ptr_que_plus_frq = &frq;

  ret = qAT_PlusFRQ(src_infos_psi->srcId, (SHORT*)&frq.pgl, (SHORT*)&frq.cbl);
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFCT         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFCT(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFCT()");

  ret = sAT_PlusFCT(src_infos_psi->srcId,
                    cmd->params.ptr_set_plus_fct->value);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFCT         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFCT(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fct fct;

  TRACE_FUNCTION ("qBAT_PlusFCT()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FCT;
  resp.response.ptr_que_plus_fct = &fct;

  ret = qAT_PlusFCT(src_infos_psi->srcId, (SHORT*)&fct.value); 
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFSA         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFSA(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFSA()");

  ret = sAT_PlusFSA(src_infos_psi->srcId, 
                    (CHAR*)cmd->params.ptr_set_plus_fsa->sub_str);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFSA         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFSA(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fsa fsa;

  TRACE_FUNCTION ("qBAT_PlusFSA()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FSA;
  resp.response.ptr_que_plus_fsa = &fsa;

  ret = qAT_PlusFSA(src_infos_psi->srcId, (CHAR*)fsa.sub_str);
  
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFSP         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFSP(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFSP()");

  ret = sAT_PlusFSP(src_infos_psi->srcId, cmd->params.ptr_set_plus_fsp->poll);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFSP         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFSP(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fsp fsp;

  TRACE_FUNCTION ("qBAT_PlusFSP()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FSP;
  resp.response.ptr_que_plus_fsp = &fsp;

  ret = qAT_PlusFSP(src_infos_psi->srcId, (T_ACI_FSP_VAL*)&fsp.poll);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusFIT         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusFIT(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusFIT()");

  ret = sAT_PlusFIT(src_infos_psi->srcId,
                    cmd->params.ptr_set_plus_fit->time,
                    cmd->params.ptr_set_plus_fit->action);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusFIT         |
+--------------------------------------------------------------------+

  PURPOSE : ITU-T.32
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusFIT(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                   T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_fit fit;

  TRACE_FUNCTION ("qBAT_PlusFIT()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_FIT;
  resp.response.ptr_que_plus_fit = &fit;
  
  ret = qAT_PlusFIT(src_infos_psi->srcId, (SHORT*)&fit.time, (T_ACI_FIT_ACT*)&fit.action);
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

#endif /* FF_FAX */