FreeCalypso > hg > fc-magnetite

view blobs/patches/tpudrv-leonardo.patch @ 700:800bf29abf31

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
audio mode load change from Tourmaline Our FreeCalypso universe now has two kinds of audio mode config files: the old 164 byte kind and the new 176 byte kind. We are not enabling L1_NEW_AEC in Magnetite, only in Tourmaline, thus 164 byte audio mode files are still native to Magnetite. But we still desire graceful handling of the situation when a running Magnetite fw may load a 176 byte audio mode file (presumably with new AEC config), thus we incorporate the same audio mode loading change which we implemented in Tourmaline: if the loaded audio mode file is of the wrong kind, the AEC config is cleared to default disabled state.
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 30 Jul 2021 03:55:52 +0000
parents 62a5285e014a
children
line wrap: on
line source

# Our version of TCS211 binary libs has been compiled for a triband
# configuration that is a bastardized version of Leonardo quadband:
# while the same 3 TSPACT lines are used for antenna switch control,
# the correct line to be driven low for each band Rx & Tx operation
# is different in every case.
#
# This change in band Rx & Tx signal assignments was made in tpudrv12.h
# and got compiled into the tpudrv12 module in tpudrv.lib; the present
# patch restores the original quadband configuration.

[tpudrv12.obj]

# Tx high or low band select

.cinit 8A 12
.cinit 92 1C
.cinit 9A 1C
.cinit A2 12
.cinit AA 12

# Bring back GSM850 Rx switch instead of PCS Rx

.cinit 98 16
.cinit A0 06