view src/cs/system/bootloader/inc/protocol.h @ 549:69e52afc01d5

configs/* except classic: rebuild tif_na7_db_{fl,ir} from source The purpose of this change is to allow a TRACEMASK_IN_FFS=1 setting given on the configure line to have effect; all configs except classic are included because this feature setting is orthogonal to the choice of G23M PS version and other config choices. (The classic config is an exception because its very purpose is to preserve a reference config with all of the original blobs.) Note that even though we are switching these TIF libraries from blobs to recompilation from source in all configs, our source for these libs compiles into a perfect match to the original blobs in the current default TRACEMASK_IN_FFS=0 configuration, hence there is no effective change beyond the unfortunate small increase in compilation times.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 18 Nov 2018 08:33:30 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/******************************************************************************
 * FLUID (Flash Loader Utility Independent of Device)
 *
 * (C) Delta Technologies 2001.
 * Cleanup, modifications and extensions by Mads Meisner-Jensen, mmj@ti.com.
 *
 * Target/PC protocol definition
 *
 * $Id: protocol.h 1.9 Wed, 31 Oct 2001 11:47:00 +0100 mmj $
 *
 ******************************************************************************/


enum ProtocolChars {
    PROTO_HELLO         = 'H',
    PROTO_BAUDRATE      = 'B',
    PROTO_HARDWARE      = 'H',
    PROTO_QUERY         = 'Q',
    PROTO_QUERY_CHIP    = 'C',
    PROTO_READY         = 'R',
    PROTO_ISEMPTY       = 'I',
    PROTO_DOWNLOAD      = 'L',
    PROTO_DETECT        = 'D',
    PROTO_ERASE         = 'E',
    PROTO_COMPRESS      = 'Z',
    PROTO_PROGRAM       = 'P',
    PROTO_CKSUM         = 'C',
    PROTO_READ          = 'R',
    PROTO_RESET         = '0',
    PROTO_ERROR_CKSUM   = 'X',
    PROTO_ERROR_MEMORY  = 'M',
    PROTO_ERROR_FLASH_TIMEOUT = 'T',
    PROTO_ERROR_FLASH_COMMAND = 'C',
    PROTO_ERROR_FLASH_VPP     = 'P',
    PROTO_ERROR_FLASH_LOCKED  = 'L',
    PROTO_ERROR_VERIFY  = 'V',
    PROTO_CHECKSUM      = 'C',
    PROTO_VERSION       = 'V',
    PROTO_ERROR         = '?',

    PROTO_TRACE         = '$'
};



// Not really part of the protocol but as this header file is included by
// both PC side and target side source code, this is an easy place to put
// these difinitions.
enum ChipIdCodes {
    // Ulysses and Hercules
    CHIP_ID_ULYSSES_0  = 0xB2B5,
    CHIP_ID_ULYSSES_A  = 0xB335,
    CHIP_ID_HERCULES_A = 0xB334, // Correct revision designation?
    CHIP_ID_HERCULES_B = 0xB32C, // Correct revision designation?

    // Samson and Calypso
    CHIP_ID_CALYPSO_A  = 0xB2AC,
    CHIP_ID_CALYPSO_B  = 0xB396
};