view cdg211/prim/mac.pdf @ 549:69e52afc01d5

configs/* except classic: rebuild tif_na7_db_{fl,ir} from source The purpose of this change is to allow a TRACEMASK_IN_FFS=1 setting given on the configure line to have effect; all configs except classic are included because this feature setting is orthogonal to the choice of G23M PS version and other config choices. (The classic config is an exception because its very purpose is to preserve a reference config with all of the original blobs.) Note that even though we are switching these TIF libraries from blobs to recompilation from source in all configs, our source for these libs compiles into a perfect match to the original blobs in the current default TRACEMASK_IN_FFS=0 configuration, hence there is no effective change beyond the unfortunate small increase in compilation times.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 18 Nov 2018 08:33:30 +0000
parents 56abf6cf8a0b
children
line wrap: on
line source

;********************************************************************************
;*** File           : mac.pdf
;*** Creation       : Fri Jun 08 13:57:45 CST 2007
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : mac
;*** Document No.   : 8441.111.03.009
;*** Document Date  : 2003-02-26
;*** Document Status: BEING_PROCESSED
;*** Document Author: SAB
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Fri Jun 18 12:26:46 2004"
PRAGMA 	LAST_MODIFIED 	"2003-02-26"
PRAGMA 	ID_AND_VERSION 	"8441.111.03.009"



CONST 	MAC_MAX_TIMESLOTS 	8 	; defines the maximum number of uplink data blocks
CONST 	MAC_BURST_PER_BLOCK 	4 	; number of bursts that compose a block
CONST 	MAC_MAX_DL_DATA_BLCKS 	4 	; maximum number of dowlink data blocks



VALTAB 	VAL_bcch_level
VAL 	0 	MAC_RXLEV_MIN 	"minimum receive signal level as defined in GSM 05.08"
VAL 	63 	MAC_RXLEV_MAX 	"maximum receive signal level as defined in GSM 05.08"
VAL 	0x80 	MAC_RXLEV_NONE 	"no valid receive signal level present"

VALTAB 	VAL_crc_error
VAL 	0 	GRLC_CRC_PASS 	"radio block is correctly received"
VAL 	1 	GRLC_CRC_FAIL 	"radio block is not correctly received"




VAR 	nts 	"Maximum number of Timeslots for uplink TBF" 	B


VAR 	fn 	"Framenumber" 	L


VAR 	rlc_blocks_sent 	"number of transmitted rlc/mac blocks (except polling)" 	B


VAR 	rx_no 	"Number of received Timeslots" 	S


VAR 	block_status 	"Block Status" 	S


VAR 	tn 	"Timeslot number" 	S


VAR 	ul_block 	"Uplink block" 	S


VAR 	dl_block 	"Downlink block" 	S


VAR 	last_poll_resp 	"Last Poll Response" 	B


VAR 	ta_value 	"Timing Advance Value" 	B


VAR 	d_macc 	"Accumulated Metric" 	S


VAR 	d_nerr 	"Number of estimated erorrs" 	S


VAR 	burst_level 	"Signal level of the first valid downlink PDCH; ." 	B


VAR 	radio_freq 	"Radio frequency of the TDMA frame; ." 	S


VAR 	bcch_level 	"Signal level of BCCH serving Cell; ." 	B

VAL 	@p_mac - VAL_bcch_level@ 	

VAR 	crc_error 	"CRC error; ." 	B

VAL 	@p_mac - VAL_crc_error@ 	

VAR 	assignment_id 	"assignment identifier; ." 	L





COMP 	ul_poll_resp 	 "Uplink Poll Response"
{
 	block_status 	 ; Block Status
 	tn 	 ; Timeslot number
 	ul_block 	[13] 	 ; Uplink block
}



COMP 	ul_data 	 "Uplink Data"
{
 	block_status 	 ; Block Status
 	ul_block 	[28] 	 ; Uplink block
}



COMP 	dl_data 	 "Downlink Data"
{
 	block_status 	 ; Block Status
 	tn 	 ; Timeslot number
 	d_macc 	 ; Accumulated Metric
 	d_nerr 	 ; Number of estimated erorrs
 	dl_block 	[27] 	 ; Downlink block
}






; MAC_DATA_REQ 	0x3200
; MAC_DATA_IND 	0x7200
; MAC_READY_IND 	0x7201
; MAC_POLL_REQ 	0x3201
; MAC_PWR_CTRL_IND 	0x7202



PRIM 	MAC_DATA_REQ 	0x3200
{
 	ul_data 	 ; Uplink Data
}






PRIM 	MAC_DATA_IND 	0x7200
{
 	fn 	 ; Framenumber
 	rx_no 	 ; Number of received Timeslots
 	dl_data 	 ; Downlink Data
}






PRIM 	MAC_READY_IND 	0x7201
{
 	nts 	 ; Maximum number of Timeslots for uplink TBF
 	fn 	 ; Framenumber
 	rlc_blocks_sent 	 ; number of transmitted rlc/mac blocks (except polling)
 	last_poll_resp 	 ; Last Poll Response
 	ta_value 	 ; Timing Advance Value
}






PRIM 	MAC_POLL_REQ 	0x3201
{
 	ul_poll_resp 	 ; Uplink Poll Response
}






PRIM 	MAC_PWR_CTRL_IND 	0x7202
{
 	assignment_id 	 ; Assignment identifier
 	crc_error 	 ; CRC error
 	bcch_level 	 ; Signal level of BCCH serving Cell
 	radio_freq 	[MAC_BURST_PER_BLOCK] 	 ; Radio frequency of the TDMA frame
 	burst_level 	[MAC_BURST_PER_BLOCK] 	 ; Signal level of the first valid downlink PDCH
}