FreeCalypso > hg > fc-magnetite
view src/cs/layer1/tm_cust0/l1tm_tpu10.c @ 673:62a5285e014a
Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango
Back in 2015 the Mother's idea was to produce a FreeCalypso development
board that would be a clone of TI Leonardo, including the original
quadband RFFE; one major additional stipulation was that this board
needed to be able to run original unmodified TCS211-20070608 firmware
with all blobs intact, with only minimal binary patches to main.lib
and tpudrv.lib. The necessary patched libs were produced at that time
in the tcs211-patches repository.
That plan was changed and we produced FCDEV3B instead, with Openmoko's
triband RFFE instead of Leonardo quadband, but when FC Magnetite started
in 2016, a TPUDRV_blob= provision was still made, allowing the possibility
of patching OM's tpudrv.lib for a restored Leonardo RFFE.
Now in 2020 we have FC Tango which is essentially a verbatim clone of
Leonardo core, including the original quadband RFFE. We have also
deblobbed our firmware so much that we have absolutely no real need
for a blob version of tpudrv.lib - but I thought it would be neat to put
the ancient TPUDRV_blob= mechanism (classic config) to its originally
intended use, just for the heck of it.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Fri, 29 May 2020 03:55:36 +0000 |
| parents | cc44352c702f |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1TM_TPU10.C * * Filename l1tm_tpu10.c * Version 1.4 * Date 01/10/03 * ************* Revision Controle System Header *************/ #include "l1_confg.h" #if (TESTMODE && (RF==10)) #include "tm_defs.h" #include "l1_const.h" #include "l1_types.h" #include "l1tm_defty.h" #include "l1tm_cust.h" #include "l1tm_tpu10.h" #if (AUDIO_TASK == 1) #include "l1audio_const.h" #include "l1audio_cust.h" #include "l1audio_defty.h" #endif #if (L1_GTT == 1) #include "l1gtt_const.h" #include "l1gtt_defty.h" #endif #include "l1_defty.h" #include "l1_msgty.h" #include "l1_tabs.h" #include "l1tm_msgty.h" #include "l1tm_varex.h" #if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3)) #include "spi_drv.h" #endif #include "sys_types.h" #include "general.h" #include "l1_time.h" #include "tpudrv.h" #include "tpudrv10.h" #include <string.h> // Import band configuration from Flash module (need to replace by an access function) // External function prototypes void Cust_tm_tpu_table_write (T_TM_RETURN *tm_return, WORD8 index, UWORD8 size, UWORD8 table[]) { /* INDICES BETWEEN in [0..63] RANGE ARE RESERVED FOR TI RF MODULE */ // fill in the cid tm_return->cid = TPU_TABLE_WRITE; switch (index) { default: tm_return->size = 0; tm_return->status = E_BADINDEX; break; } // end of switch } void Cust_tm_tpu_table_read (T_TM_RETURN *tm_return, WORD8 index) { /* INDICES BETWEEN in [0..63] RANGE ARE RESERVED FOR TI RF MODULE */ // fill in the cid tm_return->cid = TPU_TABLE_READ; switch (index) { default: tm_return->size = 0; tm_return->status = E_BADINDEX; break; } // end of switch } #endif //TESTMODE
