FreeCalypso > hg > fc-magnetite
view src/cs/layer1/p_include/l1p_sign.h @ 673:62a5285e014a
Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango
Back in 2015 the Mother's idea was to produce a FreeCalypso development
board that would be a clone of TI Leonardo, including the original
quadband RFFE; one major additional stipulation was that this board
needed to be able to run original unmodified TCS211-20070608 firmware
with all blobs intact, with only minimal binary patches to main.lib
and tpudrv.lib. The necessary patched libs were produced at that time
in the tcs211-patches repository.
That plan was changed and we produced FCDEV3B instead, with Openmoko's
triband RFFE instead of Leonardo quadband, but when FC Magnetite started
in 2016, a TPUDRV_blob= provision was still made, allowing the possibility
of patching OM's tpudrv.lib for a restored Leonardo RFFE.
Now in 2020 we have FC Tango which is essentially a verbatim clone of
Leonardo core, including the original quadband RFFE. We have also
deblobbed our firmware so much that we have absolutely no real need
for a blob version of tpudrv.lib - but I thought it would be neat to put
the ancient TPUDRV_blob= mechanism (classic config) to its originally
intended use, just for the heck of it.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Fri, 29 May 2020 03:55:36 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1P_SIGN.H * * Filename l1p_sign.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #define P_GPRS ( P_L1C + 2 ) // Messages Packet Transfer <-> L1A #define MPHP_SINGLE_BLOCK_REQ ( ( P_GPRS << 8 ) | 1 ) #define MPHP_SINGLE_BLOCK_CON ( ( P_GPRS << 8 ) | 2 ) #define MPHP_STOP_SINGLE_BLOCK_REQ ( ( P_GPRS << 8 ) | 3 ) #define MPHP_STOP_SINGLE_BLOCK_CON ( ( P_GPRS << 8 ) | 4 ) #define L1P_SINGLE_BLOCK_CON ( ( P_GPRS << 8 ) | 5 ) #define MPHP_ASSIGNMENT_REQ ( ( P_GPRS << 8 ) | 6 ) #define MPHP_ASSIGNMENT_CON ( ( P_GPRS << 8 ) | 7 ) #define MPHP_TBF_RELEASE_REQ ( ( P_GPRS << 8 ) | 8 ) #define MPHP_TBF_RELEASE_CON ( ( P_GPRS << 8 ) | 9 ) #define MPHP_REPEAT_UL_FIXED_ALLOC_REQ ( ( P_GPRS << 8 ) | 10 ) #define MPHP_REPEAT_UL_FIXED_ALLOC_CON ( ( P_GPRS << 8 ) | 11 ) #define MPHP_PDCH_RELEASE_REQ ( ( P_GPRS << 8 ) | 12 ) #define MPHP_PDCH_RELEASE_CON ( ( P_GPRS << 8 ) | 13 ) #define MPHP_TIMING_ADVANCE_REQ ( ( P_GPRS << 8 ) | 14 ) #define MPHP_TIMING_ADVANCE_CON ( ( P_GPRS << 8 ) | 15 ) #define MPHP_UPDATE_PSI_PARAM_REQ ( ( P_GPRS << 8 ) | 16 ) #define MPHP_UPDATE_PSI_PARAM_CON ( ( P_GPRS << 8 ) | 17 ) #define MPHP_RA_REQ ( ( P_GPRS << 8 ) | 18 ) #define MPHP_RA_CON ( ( P_GPRS << 8 ) | 19 ) #define MPHP_RA_STOP_REQ ( ( P_GPRS << 8 ) | 20 ) #define MPHP_RA_STOP_CON ( ( P_GPRS << 8 ) | 21 ) #define MPHP_POLLING_RESPONSE_REQ ( ( P_GPRS << 8 ) | 22 ) #define MPHP_POLLING_IND ( ( P_GPRS << 8 ) | 23 ) #define L1P_RA_DONE ( ( P_GPRS << 8 ) | 24 ) // Messages Packet Idle <-> L1A #define MPHP_START_PCCCH_REQ ( ( P_GPRS << 8 ) | 25 ) #define MPHP_STOP_PCCCH_REQ ( ( P_GPRS << 8 ) | 26 ) #define MPHP_STOP_PCCCH_CON ( ( P_GPRS << 8 ) | 27 ) #define MPHP_SCELL_PBCCH_REQ ( ( P_GPRS << 8 ) | 28 ) #define MPHP_SCELL_PBCCH_STOP_REQ ( ( P_GPRS << 8 ) | 29 ) #define MPHP_SCELL_PBCCH_STOP_CON ( ( P_GPRS << 8 ) | 30 ) #define MPHP_CR_MEAS_REQ ( ( P_GPRS << 8 ) | 31 ) #define MPHP_CR_MEAS_STOP_REQ ( ( P_GPRS << 8 ) | 32 ) #define MPHP_CR_MEAS_STOP_CON ( ( P_GPRS << 8 ) | 33 ) #define MPHP_INT_MEAS_REQ ( ( P_GPRS << 8 ) | 34 ) #define MPHP_INT_MEAS_STOP_REQ ( ( P_GPRS << 8 ) | 35 ) #define MPHP_INT_MEAS_STOP_CON ( ( P_GPRS << 8 ) | 36 ) #define MPHP_NCELL_PBCCH_REQ ( ( P_GPRS << 8 ) | 37 ) #define MPHP_NCELL_PBCCH_STOP_REQ ( ( P_GPRS << 8 ) | 38 ) #define MPHP_NCELL_PBCCH_STOP_CON ( ( P_GPRS << 8 ) | 39 ) #define MPHP_DATA_IND ( ( P_GPRS << 8 ) | 40 ) #define MPHP_CR_MEAS_IND ( ( P_GPRS << 8 ) | 41 ) #define MPHP_INT_MEAS_IND ( ( P_GPRS << 8 ) | 42 ) #define MPHP_TINT_MEAS_IND ( ( P_GPRS << 8 ) | 43 ) #define MPHP_NCELL_PBCCH_IND ( ( P_GPRS << 8 ) | 44 ) #define MPHP_TCR_MEAS_REQ ( ( P_GPRS << 8 ) | 45 ) #define MPHP_TCR_MEAS_IND ( ( P_GPRS << 8 ) | 46 ) #define MPHP_TCR_MEAS_STOP_REQ ( ( P_GPRS << 8 ) | 47 ) #define MPHP_TCR_MEAS_STOP_CON ( ( P_GPRS << 8 ) | 48 ) /*** L1S -> L1A communication ***/ #define L1P_PALLC_INFO ( ( P_GPRS << 8) | 49) #define L1P_PNP_INFO ( ( P_GPRS << 8) | 50) #define L1P_PEP_INFO ( ( P_GPRS << 8) | 51) #define L1P_PBCCHS_INFO ( ( P_GPRS << 8) | 52) #define L1P_PACCH_INFO ( ( P_GPRS << 8) | 53) #define L1P_CR_MEAS_DONE ( ( P_GPRS << 8) | 54) #define L1P_TRANSFER_DONE ( ( P_GPRS << 8) | 55) #define L1P_TCR_MEAS_DONE ( ( P_GPRS << 8) | 56) #define L1P_TBF_RELEASED ( ( P_GPRS << 8) | 57) #define L1P_ITMEAS_IND ( ( P_GPRS << 8) | 58) #define L1P_POLL_DONE ( ( P_GPRS << 8) | 59) #define L1P_PDCH_RELEASED ( ( P_GPRS << 8) | 60) #define L1P_TA_CONFIG_DONE ( ( P_GPRS << 8) | 61) #define L1P_PBCCHN_INFO ( ( P_GPRS << 8) | 62) #define L1P_REPEAT_ALLOC_DONE ( ( P_GPRS << 8) | 63) #define L1P_ALLOC_EXHAUST_DONE ( ( P_GPRS << 8) | 64)