view src/cs/drivers/drv_app/lcc/lcc_modulate.h @ 673:62a5285e014a

Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango Back in 2015 the Mother's idea was to produce a FreeCalypso development board that would be a clone of TI Leonardo, including the original quadband RFFE; one major additional stipulation was that this board needed to be able to run original unmodified TCS211-20070608 firmware with all blobs intact, with only minimal binary patches to main.lib and tpudrv.lib. The necessary patched libs were produced at that time in the tcs211-patches repository. That plan was changed and we produced FCDEV3B instead, with Openmoko's triband RFFE instead of Leonardo quadband, but when FC Magnetite started in 2016, a TPUDRV_blob= provision was still made, allowing the possibility of patching OM's tpudrv.lib for a restored Leonardo RFFE. Now in 2020 we have FC Tango which is essentially a verbatim clone of Leonardo core, including the original quadband RFFE. We have also deblobbed our firmware so much that we have absolutely no real need for a blob version of tpudrv.lib - but I thought it would be neat to put the ancient TPUDRV_blob= mechanism (classic config) to its originally intended use, just for the heck of it.
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 29 May 2020 03:55:36 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/******************************************************************************
 * Power Task (pwr)
 * Design and coding by Svend Kristian Lindholm, skl@ti.com
 *
 * PWR SW Modulation
 *
 * $Id: pwr_modulate.h 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $
 *
 ******************************************************************************/
#ifndef __LCC_MODULATE_H__
#define __LCC_MODULATE_H__

#include "lcc/lcc.h"
#include "lcc/lcc_cfg.h"

// SW modulation using the following addresses
#if (USE_PWL_AS_MODULATOR == 1)
// D-Sample - no modulation - just envelope function to simulate GPIO 6
    #define PWL_LEVEL_REG (*(volatile unsigned char*) 0xFFFE8000)
    #define PWL_CTRL_REG  (*(volatile unsigned char*) 0xFFFE8001)
    #define BUZZ_LIGHT_REG (*(volatile short*) 0xFFFE480E) // Enable buzzer (bit 0) and PWL (bit 1)
#endif
/******************************************************************************
 * Function prototypes
 ******************************************************************************/

void pwr_modulate_init(void);
void pwr_modulate_on(void);
void pwr_modulate_off(void);

#endif