view src/cs/drivers/drv_app/lcc/lcc_handle_message.h @ 673:62a5285e014a

Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango Back in 2015 the Mother's idea was to produce a FreeCalypso development board that would be a clone of TI Leonardo, including the original quadband RFFE; one major additional stipulation was that this board needed to be able to run original unmodified TCS211-20070608 firmware with all blobs intact, with only minimal binary patches to main.lib and tpudrv.lib. The necessary patched libs were produced at that time in the tcs211-patches repository. That plan was changed and we produced FCDEV3B instead, with Openmoko's triband RFFE instead of Leonardo quadband, but when FC Magnetite started in 2016, a TPUDRV_blob= provision was still made, allowing the possibility of patching OM's tpudrv.lib for a restored Leonardo RFFE. Now in 2020 we have FC Tango which is essentially a verbatim clone of Leonardo core, including the original quadband RFFE. We have also deblobbed our firmware so much that we have absolutely no real need for a blob version of tpudrv.lib - but I thought it would be neat to put the ancient TPUDRV_blob= mechanism (classic config) to its originally intended use, just for the heck of it.
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 29 May 2020 03:55:36 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/******************************************************************************
 * Power Task (pwr)
 * Design and coding by Svend Kristian Lindholm, skl@ti.com
 *
 * PWR Message Processing
 *
 * $Id: pwr_handle_message.h 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $
 *
 ******************************************************************************/
#ifndef __LCC_HANDLE_MESSAGE_H_
#define __LCC_HANDLE_MESSAGE_H_

#include "lcc/lcc.h"

/******************************************************************************
 * Function prototypes
 ******************************************************************************/

T_RVM_RETURN pwr_task_init(void);
T_RV_RET process_pwr_tm_read_request         (T_PWR_REQ *request);
T_RV_RET process_pwr_tm_write_request        (T_PWR_REQ *request);
T_RV_RET process_spi_adc_indication          (T_PWR_REQ *request);
void pwr_send_msg(uint32 msg_id ,T_RVF_ADDR_ID src_addr_id, T_RVF_ADDR_ID  dest_addr_id);
void pwr_modulate_on(void);
void pwr_modulate_off(void);
void start_q401_charge(void);
void stop_q401_charge(void);

void build_name(const char *ch_pre, char *cfg_id , UINT8 index, const char * ch_post,  char * name);
void cv_charging_house_keeping(void);
void end_charging_house_keeping(void);

#endif