FreeCalypso > hg > fc-magnetite
view scripts/config-headers-new.sh @ 673:62a5285e014a
Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango
Back in 2015 the Mother's idea was to produce a FreeCalypso development
board that would be a clone of TI Leonardo, including the original
quadband RFFE; one major additional stipulation was that this board
needed to be able to run original unmodified TCS211-20070608 firmware
with all blobs intact, with only minimal binary patches to main.lib
and tpudrv.lib. The necessary patched libs were produced at that time
in the tcs211-patches repository.
That plan was changed and we produced FCDEV3B instead, with Openmoko's
triband RFFE instead of Leonardo quadband, but when FC Magnetite started
in 2016, a TPUDRV_blob= provision was still made, allowing the possibility
of patching OM's tpudrv.lib for a restored Leonardo RFFE.
Now in 2020 we have FC Tango which is essentially a verbatim clone of
Leonardo core, including the original quadband RFFE. We have also
deblobbed our firmware so much that we have absolutely no real need
for a blob version of tpudrv.lib - but I thought it would be neat to put
the ancient TPUDRV_blob= mechanism (classic config) to its originally
intended use, just for the heck of it.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 29 May 2020 03:55:36 +0000 |
parents | 92dbfa906f66 |
children | 8cf3029429f3 |
line wrap: on
line source
#!/bin/sh if [ -z "$TARGET" ] then echo "Error: TARGET= must be passed via environment" 1>&2 exit 1 fi if [ -z "$BUILD_DIR" ] then echo "Error: BUILD_DIR= must be passed via environment" 1>&2 exit 1 fi # The following vars will already be set when this script is invoked # from configure.sh in a production build, but the following defaulting logic # helps with manual invokation during development. if [ -z "$CHIPSET" ] then CHIPSET=10 fi export CHIPSET if [ -z "$DSP" ] then DSP=36 fi export DSP if [ -z "$RF" ] then RF=12 fi export RF if [ -z "$AMR" ] then AMR=1 fi export AMR if [ -z "$L1_DYN_DSP_DWNLD" ] then L1_DYN_DSP_DWNLD=1 fi export L1_DYN_DSP_DWNLD if [ -z "$L1_VOICE_MEMO_AMR" ] then L1_VOICE_MEMO_AMR=1 fi export L1_VOICE_MEMO_AMR if [ -z "$MELODY_E2" ] then MELODY_E2=1 fi export MELODY_E2 if [ -z "$SPEECH_RECO" ] then SPEECH_RECO=1 fi export SPEECH_RECO if [ -z "$GPRS" ] then GPRS=1 fi export GPRS if [ -z "$SRVC" ] then SRVC=1 fi export SRVC if [ -z "$ATP_STATE" ] then ATP_STATE=0 fi export ATP_STATE if [ -z "$FCHG_STATE" ] then FCHG_STATE=1 fi export FCHG_STATE if [ -z "$LCC_STATE" ] then LCC_STATE=0 fi export LCC_STATE if [ -z "$MKS_STATE" ] then MKS_STATE=0 fi export MKS_STATE if [ -z "$PWR_STATE" ] then PWR_STATE=0 fi export PWR_STATE if [ -z "$R2D_STATE" ] then R2D_STATE=1 fi export R2D_STATE if [ -z "$DSAMPLE_FULL_COLOR" ] then DSAMPLE_FULL_COLOR=1 fi export DSAMPLE_FULL_COLOR if [ -z "$TR_BAUD_CONFIG" ] then TR_BAUD_CONFIG=TR_BAUD_115200 fi export TR_BAUD_CONFIG # Derived settings only for the generation of *.cfg headers case "$RF" in 10) RF_FAM=10 RF_PA=0 RF_PG=0 ;; 12) RF_FAM=12 RF_PA=2 RF_PG=2 ;; *) echo "Error: RF=$RF setting not understood" 1>&2 exit 1 esac export RF_FAM RF_PA RF_PG case "$GPRS" in 0) L1_GPRS=0 PMODE=1 ;; 1) L1_GPRS=1 PMODE=2 ;; *) echo "Error: GPRS=$GPRS setting not understood" 1>&2 exit 1 esac export L1_GPRS PMODE if [ "$SRVC" != 0 ] then IDS=1 else IDS=0 fi export IDS # do it! set -e rm -rf $BUILD_DIR/config mkdir $BUILD_DIR/config helpers/cfg-hdr-gen scripts/cfg-template $BUILD_DIR/config scripts/make-rv-swe-hdr.sh > $BUILD_DIR/config/rv_swe.h cp targets/$TARGET.h $BUILD_DIR/config/fc-target.h