FreeCalypso > hg > fc-magnetite

view src/g23m-aci/uart/uart_drxs.h @ 636:57e67ca2e1cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
pcmdata.c: default +CGMI to "FreeCalypso" and +CGMM to model The present change has no effect whatsoever on Falconia-made and Openmoko-made devices on which /pcm/CGMI and /pcm/CGMM files have been programmed in FFS with sensible ID strings by the respective factories, but what should AT+CGMI and AT+CGMM queries return when the device is a Huawei GTM900 or Tango modem that has been converted to FreeCalypso with a firmware change? Before the present change they would return compiled-in defaults of "<manufacturer>" and "<model>", respectively; with the present change the firmware will self-identify as "FreeCalypso GTM900-FC" or "FreeCalypso Tango" on the two respective targets. This firmware identification will become important if someone incorporates an FC-converted GTM900 or Tango modem into a ZeroPhone-style smartphone where some high-level software like ofono will be talking to the modem and will need to properly identify this modem as FreeCalypso, as opposed to some other AT command modem flavor with different quirks. In technical terms, the compiled-in default for the AT+CGMI query (which will always be overridden by the /pcm/CGMI file in FFS if one is present) is now "FreeCalypso" in all configs on all targets; the compiled-in default for the AT+CGMM query (likewise always overridden by /pcm/CGMM if present) is "GTM900-FC" if CONFIG_TARGET_GTM900 or "Tango" if CONFIG_TARGET_TANGO or the original default of "<model>" otherwise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 19 Jan 2020 20:14:58 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for uart_drxs.c 
+----------------------------------------------------------------------------- 
*/ 

#ifndef UART_DRXS_H
#define UART_DRXS_H


EXTERN void sig_ker_drx_ready_mode_req (UBYTE dlc_instance);

EXTERN void sig_ker_drx_dead_mode_req (void);

EXTERN void sig_ker_drx_enable_req (void);

EXTERN void sig_ker_drx_disable_req (void);

EXTERN void sig_tx_drx_sending_req (void);

EXTERN void sig_tx_drx_data_sent_req (T_desc2* rest_data, USHORT pos);

EXTERN void sig_ker_drx_set_dti_peer_req (USHORT tui_peer, 
                                          T_HANDLE peer_handle, 
                                          UBYTE c_id);

#ifdef DTILIB
EXTERN void sig_ker_drx_set_dtilib_peer_req (void);
#ifdef DTI2
EXTERN void sig_ker_drx_disconnected_mode_req(void);
#endif /* DTI2 */
#endif /* DTILIB */

EXTERN void sig_ker_drx_flush_req (void);

#endif /* !UART_DRXS_H */