FreeCalypso > hg > fc-magnetite
view src/cs/services/dar/dar_error_hdlr.c @ 636:57e67ca2e1cb
pcmdata.c: default +CGMI to "FreeCalypso" and +CGMM to model
The present change has no effect whatsoever on Falconia-made and Openmoko-made
devices on which /pcm/CGMI and /pcm/CGMM files have been programmed in FFS
with sensible ID strings by the respective factories, but what should AT+CGMI
and AT+CGMM queries return when the device is a Huawei GTM900 or Tango modem
that has been converted to FreeCalypso with a firmware change? Before the
present change they would return compiled-in defaults of "<manufacturer>" and
"<model>", respectively; with the present change the firmware will self-identify
as "FreeCalypso GTM900-FC" or "FreeCalypso Tango" on the two respective targets.
This firmware identification will become important if someone incorporates an
FC-converted GTM900 or Tango modem into a ZeroPhone-style smartphone where some
high-level software like ofono will be talking to the modem and will need to
properly identify this modem as FreeCalypso, as opposed to some other AT command
modem flavor with different quirks.
In technical terms, the compiled-in default for the AT+CGMI query (which will
always be overridden by the /pcm/CGMI file in FFS if one is present) is now
"FreeCalypso" in all configs on all targets; the compiled-in default for the
AT+CGMM query (likewise always overridden by /pcm/CGMM if present) is
"GTM900-FC" if CONFIG_TARGET_GTM900 or "Tango" if CONFIG_TARGET_TANGO or the
original default of "<model>" otherwise.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 19 Jan 2020 20:14:58 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/****************************************************************************/ /* */ /* File Name: dar_error_hdlr.c */ /* */ /* Purpose: This file contains routines used to report unrecoverable */ /* memory errors that might occur. */ /* */ /* Version 0.1 */ /* */ /* Date Modification */ /* ------------------------------------------------------------------------*/ /* 27 September 2001 Create */ /* */ /* Author: Stephanie Gerthoux */ /* */ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/ /****************************************************************************/ #include "rv/rv_defined_swe.h" #ifdef RVM_DAR_SWE #include "rv/rv_general.h" #include "rvf/rvf_api.h" #include "dar/dar_error_hdlr_i.h" #include "dar/dar_macro_i.h" /********************************************************************************/ /* */ /* Function Name: dar_error_trace */ /* */ /* Purpose: This function is used to report error occured during the */ /* diagnose entity execution */ /* */ /* Input Parameters: */ /* status - Contains the error code to be reported. */ /* */ /* Output Parameters: */ /* None. */ /* */ /* Global Parameters: */ /* None. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* 27 September 01 Create */ /* */ /********************************************************************************/ void dar_error_trace(UINT8 error_id) { switch(error_id) { case DAR_ENTITY_NOT_START: { DAR_SEND_TRACE("DAR entity not started.",RV_TRACE_LEVEL_ERROR); break; } case DAR_ENTITY_NO_MEMORY: { DAR_SEND_TRACE("DAR entity has not enough memory",RV_TRACE_LEVEL_ERROR); break; } case DAR_ENTITY_BAD_PARAMETER: { DAR_SEND_TRACE("DAR entity has bad parameters",RV_TRACE_LEVEL_ERROR); break; } case DAR_ERROR_STOP_EVENT: { DAR_SEND_TRACE("DAR entity has received a stop error event",RV_TRACE_LEVEL_ERROR); break; } case DAR_ERROR_START_EVENT: { DAR_SEND_TRACE("DAR entity has received a start error event",RV_TRACE_LEVEL_ERROR); break; } case DAR_ENTITY_BAD_MESSAGE: { DAR_SEND_TRACE("DAR entity has received a bad message",RV_TRACE_LEVEL_ERROR); break; } } } /************************* End of dar_error_trace function **********************/ /********************************************************************************/ /* */ /* Function Name: dar_ffs_error_trace */ /* */ /* Purpose: This function is used to report error occured during the */ /* dar entity execution */ /* */ /* Input Parameters: */ /* status - Contains the error code to be reported. */ /* */ /* Output Parameters: */ /* None. */ /* */ /* Global Parameters: */ /* None. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* 29 october 01 Create */ /* */ /********************************************************************************/ void dar_ffs_error_trace(UINT8 error_id) { switch(error_id) { case DAR_ENTITY_NO_MEMORY: { DAR_SEND_TRACE("DAR FFS entity has not enough memory",RV_TRACE_LEVEL_ERROR); break; } case DAR_ENTITY_FILE_ERROR: { DAR_SEND_TRACE("DAR FFS entity has received a wrong file name or the flash is not formatted",RV_TRACE_LEVEL_ERROR); break; } case DAR_ENTITY_FILE_NO_SAVED: { DAR_SEND_TRACE("DAR FFS entity has not saved the file",RV_TRACE_LEVEL_ERROR); break; } case DAR_ENTITY_FILE_NO_CLOSE: { DAR_SEND_TRACE("DAR FFS entity has not closed the file",RV_TRACE_LEVEL_ERROR); break; } } /* switch(error_id) */ } /* dar_ffs_error_trace */ /************************* End of dar_ffs_error_trace function **********************/ #endif /* #ifdef RVM_DAR_SWE */