FreeCalypso > hg > fc-magnetite

view src/cs/services/atp/atp_spp_api_i.h @ 636:57e67ca2e1cb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
pcmdata.c: default +CGMI to "FreeCalypso" and +CGMM to model The present change has no effect whatsoever on Falconia-made and Openmoko-made devices on which /pcm/CGMI and /pcm/CGMM files have been programmed in FFS with sensible ID strings by the respective factories, but what should AT+CGMI and AT+CGMM queries return when the device is a Huawei GTM900 or Tango modem that has been converted to FreeCalypso with a firmware change? Before the present change they would return compiled-in defaults of "<manufacturer>" and "<model>", respectively; with the present change the firmware will self-identify as "FreeCalypso GTM900-FC" or "FreeCalypso Tango" on the two respective targets. This firmware identification will become important if someone incorporates an FC-converted GTM900 or Tango modem into a ZeroPhone-style smartphone where some high-level software like ofono will be talking to the modem and will need to properly identify this modem as FreeCalypso, as opposed to some other AT command modem flavor with different quirks. In technical terms, the compiled-in default for the AT+CGMI query (which will always be overridden by the /pcm/CGMI file in FFS if one is present) is now "FreeCalypso" in all configs on all targets; the compiled-in default for the AT+CGMM query (likewise always overridden by /pcm/CGMM if present) is "GTM900-FC" if CONFIG_TARGET_GTM900 or "Tango" if CONFIG_TARGET_TANGO or the original default of "<model>" otherwise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 19 Jan 2020 20:14:58 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/*******************************************************************************
*
* File Name : atp_spp_api_i.h
*
* Internal Definitions for the interface between ATP and SPP SW entity
*
* (C) Texas Instruments, all rights reserved
*
* Version number	: 0.1      Date : 16-Marsh-2000
*
* History			: 0.1  - Created by E. Baissus
*
*
* Author			: Eric Baissus : e-baissus@ti.com
*
*   (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved
******************************************************************************/
#ifndef ATP_SPP_API_I_H
#define ATP_SPP_API_I_H


#include "rv/rv_general.h"
#include "rvf/rvf_api.h"
#include "spp_general.h"
#include "spp_up_interface.h"

// Structure used to store the 'open pending port' information


typedef struct 
{
	T_ATP_SW_ENTITY_ID initiator_id;
	T_ATP_PORT_NB port_nb;
	T_SPP_HANDLE handle;
} T_ATP_SPP_PENDING_PORT_INFO;


typedef enum
{
	ATP_SPP_IS_IND,
	ATP_SPP_IS_CFM
} T_ATP_SPP_IS_IND_OR_CFM;


void atp_spp_to_spp_if_ft(void * message_p);
T_RV_RET atp_spp_open_port_rqst(T_ATP_OPEN_PORT_IND * open_port_ind_p);
T_RV_RET atp_spp_open_port_rsp(void * spp_open_port_rsp_p,T_ATP_SPP_IS_IND_OR_CFM cfm_or_ind);
T_RV_RET atp_spp_port_closed_from_atp(T_ATP_PORT_CLOSED * close_port_p);
T_RV_RET atp_spp_send_to_spp_buffer_nc(T_ATP_NO_COPY_DATA_RDY * atp_no_copy_p);
void atp_spp_from_spp_if_ft(void * message_p);
T_RV_RET atp_spp_reg(void);
T_RV_RET atp_spp_set_atp_signals(T_SPP_LINE_STS * message_p);
T_RV_RET atp_spp_set_spp_signals(T_ATP_SIGNAL_CHANGED * message_p);


#endif