FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_core/armio/armio.h @ 636:57e67ca2e1cb
pcmdata.c: default +CGMI to "FreeCalypso" and +CGMM to model
The present change has no effect whatsoever on Falconia-made and Openmoko-made
devices on which /pcm/CGMI and /pcm/CGMM files have been programmed in FFS
with sensible ID strings by the respective factories, but what should AT+CGMI
and AT+CGMM queries return when the device is a Huawei GTM900 or Tango modem
that has been converted to FreeCalypso with a firmware change? Before the
present change they would return compiled-in defaults of "<manufacturer>" and
"<model>", respectively; with the present change the firmware will self-identify
as "FreeCalypso GTM900-FC" or "FreeCalypso Tango" on the two respective targets.
This firmware identification will become important if someone incorporates an
FC-converted GTM900 or Tango modem into a ZeroPhone-style smartphone where some
high-level software like ofono will be talking to the modem and will need to
properly identify this modem as FreeCalypso, as opposed to some other AT command
modem flavor with different quirks.
In technical terms, the compiled-in default for the AT+CGMI query (which will
always be overridden by the /pcm/CGMI file in FFS if one is present) is now
"FreeCalypso" in all configs on all targets; the compiled-in default for the
AT+CGMM query (likewise always overridden by /pcm/CGMM if present) is
"GTM900-FC" if CONFIG_TARGET_GTM900 or "Tango" if CONFIG_TARGET_TANGO or the
original default of "<model>" otherwise.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 19 Jan 2020 20:14:58 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/* * ARMIO.H * * Control diagnostic bits * * Reference : GCS207 * */ #include "chipset.cfg" #include "l1sw.cfg" #if (OP_L1_STANDALONE == 0) #include "main/sys_types.h" #else #include "sys_types.h" #endif // Duplicate address with ARMIO_IO_CNTL // Need to investigate !!! //#define ARMIO_CNTL (MEM_ARMIO + 0x04) /* I/O control */ #define ARMIO_IN (MEM_ARMIO + 0x00) /* inputs */ #define ARMIO_OUT (MEM_ARMIO + 0x02) /* outputs */ #define ARMIO_IO_CNTL (MEM_ARMIO + 0x04) /* I/O control */ #define ARMIO_CNTL_REG (MEM_ARMIO + 0x06) /* control ARMIO */ #define ARMIO_LOAD_TIM (MEM_ARMIO + 0x08) /* load TIM */ #if (CHIPSET != 12) #define ARMIO_KBR_IN (MEM_ARMIO + 0x0A) /* KBR inputs (rows) */ #define ARMIO_KBR_OUT (MEM_ARMIO + 0x0C) /* KBR outputs (columns) */ #endif #define ARMIO_PWM_CNTL (MEM_ARMIO + 0x0E) /* LIGHT/BUZZER control */ #define ARMIO_LIGHT (MEM_ARMIO + 0x10) /* light value */ #define ARMIO_BUZZER (MEM_ARMIO + 0x12) /* buzzer value */ #define ARMIO_CLOCKEN 0x0020 #if (CHIPSET != 12) #define CLKM_IO_CNTL MEM_IO_SEL /* control IO */ #endif #if (CHIPSET == 12) #define GPIO_INTERRUPT_LEVEL_REG * (volatile SYS_UWORD16 *) (MEM_ARMIO + 0x16) #define GPIO_INTERRUPT_MASK_REG * (volatile SYS_UWORD16 *) (MEM_ARMIO + 0x18) #else #define ARMIO_GPIO_EVENT_MODE (MEM_ARMIO + 0x14) /* GPIO event mode */ #define ARMIO_KBD_GPIO_INT (MEM_ARMIO + 0x16) /* Kbd/GPIO IRQ register */ #define ARMIO_KBD_GPIO_MASKIT (MEM_ARMIO + 0x18) /* Kbd/GPIO mask IRQ */ // CC test 0316 #define ARMIO_GPIO_DEBOUNCE (MEM_ARMIO + 0x1A) /* GPIO debounceing register*/ // end #endif #if (CHIPSET != 12) #define ARMIO_DCD (2) /* IO used for DCD on C-Sample - Output */ #endif #define ARMIO_DTR (3) /* IO used for DTR on C-Sample - Input */ #define ARMIO_FALLING_EDGE (0) #define ARMIO_RISING_EDGE (1) #if (CHIPSET != 12) #define ARMIO_KEYPDAD_INT (0x0001) #define ARMIO_GPIO_INT (0x0002) #define ARMIO_MASKIT_KBD (0x0001) #define ARMIO_MASKIT_GPIO (0x0002) void AI_EnableBit(int bit); void AI_DisableBit(int bit); #endif void AI_SetBit(int bit); void AI_ResetBit(int bit); void AI_ConfigBitAsOutput(int bit); void AI_ConfigBitAsInput(int bit); SYS_BOOL AI_ReadBit(int bit); void AI_SetSimIO3V(SYS_UWORD8 StdOutput); #if (OP_L1_STANDALONE == 0) void AI_Power(SYS_UWORD8 power); #endif void AI_ResetTspIO(void); void AI_ResetDbgReg(void); void AI_ResetIoConfig(void); void AI_InitIOConfig(void); void AI_ClockEnable (void); void AI_SelectIOForIT (SYS_UWORD16 Pin, SYS_UWORD16 Edge); #if (CHIPSET != 12) int AI_CheckITSource (SYS_UWORD16 Source); #endif void AI_UnmaskIT (SYS_UWORD16 Source); void AI_MaskIT (SYS_UWORD16 Source);