FreeCalypso > hg > fc-magnetite
view src/aci2/aci/psa_t30.h @ 636:57e67ca2e1cb
pcmdata.c: default +CGMI to "FreeCalypso" and +CGMM to model
The present change has no effect whatsoever on Falconia-made and Openmoko-made
devices on which /pcm/CGMI and /pcm/CGMM files have been programmed in FFS
with sensible ID strings by the respective factories, but what should AT+CGMI
and AT+CGMM queries return when the device is a Huawei GTM900 or Tango modem
that has been converted to FreeCalypso with a firmware change? Before the
present change they would return compiled-in defaults of "<manufacturer>" and
"<model>", respectively; with the present change the firmware will self-identify
as "FreeCalypso GTM900-FC" or "FreeCalypso Tango" on the two respective targets.
This firmware identification will become important if someone incorporates an
FC-converted GTM900 or Tango modem into a ZeroPhone-style smartphone where some
high-level software like ofono will be talking to the modem and will need to
properly identify this modem as FreeCalypso, as opposed to some other AT command
modem flavor with different quirks.
In technical terms, the compiled-in default for the AT+CGMI query (which will
always be overridden by the /pcm/CGMI file in FFS if one is present) is now
"FreeCalypso" in all configs on all targets; the compiled-in default for the
AT+CGMM query (likewise always overridden by /pcm/CGMM if present) is
"GTM900-FC" if CONFIG_TARGET_GTM900 or "Tango" if CONFIG_TARGET_TANGO or the
original default of "<model>" otherwise.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 19 Jan 2020 20:14:58 +0000 |
| parents | 93999a60b835 |
| children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : PSA_T30 +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definitions for the protocol stack adapter T30 +----------------------------------------------------------------------------- */ #ifndef PSA_T30_H #define PSA_T30_H #ifdef FF_FAX #define REPORT_MAX 128 #define MSG_SIZE_BITS 2880 /*==== CONSTANTS ==================================================*/ typedef enum { NO_VLD_FS = 0, /* not a valid fax status */ FS_IDL, /* fax idle */ FS_SND_DOC, /* sending fax document */ FS_RCV_DOC, /* receiving fax document */ FS_DOC_TRF /* fax document transfered */ } T_T30_FXST; /*==== TYPES ======================================================*/ typedef struct { UBYTE dir; USHORT l_buf; UBYTE buf[REPORT_MAX]; } T_Report; typedef struct T30ShrdParm { SHORT cId; /* related call id */ UBYTE faxStat; /* status of fax */ USHORT trans_rate; /* t30_activate_req, t30_modify_req */ UBYTE half_rate; /* t30_activate_req, t30_modify_req */ UBYTE threshold; /* t30_activate_req */ UBYTE bitord; /* t30_activate_req */ USHORT frames_per_prim; /* t30_activate_req */ USHORT tbs; /* t30_activate_cnf */ USHORT rbs; /* t30_activate_cnf */ T_hdlc_info hdlc_rcv; /* t30_cap_ind, t30_cap_req */ T_hdlc_info hdlc_snd; /* t30_cap_ind, t30_cap_req */ UBYTE sgn_rcv; /* t30_sgn_ind */ UBYTE sgn_snd; /* t30_sgn_req */ UBYTE cmpl; /* t30_cmpl_ind */ UBYTE hdlc_report; /* t30_config_req */ U16 test_mode; /* t30_config_req */ USHORT err_cause; /* t30_error_ind */ USHORT eol; /* t30_info_ind */ T_Report report; /* t30_report_ind */ UBYTE bcs_phase; /* ks */ UBYTE msg_phase; BOOL T30_is_activated; } T_T30_SHRD_PRM; typedef struct T30TstPrmRef { const char * key; /* keyword string */ UBYTE id; /* corresponding id */ } T30_TSTPRM_REF; /*==== PROTOTYPES =================================================*/ EXTERN SHORT psaT30_Ppm (void); #ifdef DTI EXTERN void psaT30_Dti_Req (T_DTI_CONN_LINK_ID link_id, UBYTE dti_conn); #endif /* DTI */ #ifdef FF_FAX EXTERN void psaT30_Init (void); #endif EXTERN SHORT psaT30_Ppm (void); EXTERN void psaT30_Modify (void); EXTERN void psaT30_Disconnect (void); EXTERN void psaT30_Config (void); EXTERN void psaT30_Capabilities (void); EXTERN void psaT30_Activate (void); EXTERN void psaT30_Deactivate (void); #ifdef TRACING EXTERN void psaT30_shrPrmDump ( void ); #endif /*==== EXPORT =====================================================*/ #ifdef PSA_T30F_C GLOBAL T_T30_SHRD_PRM t30ShrdPrm; #else EXTERN T_T30_SHRD_PRM t30ShrdPrm; #endif /* PSA_T30F_C */ #endif /* FF_FAX */ #endif /* PSA_T30_H */ /*==== EOF =======================================================*/
