pcmdata.c: default +CGMI to "FreeCalypso" and +CGMM to model The present change has no effect whatsoever on Falconia-made and Openmoko-made devices on which /pcm/CGMI and /pcm/CGMM files have been programmed in FFS with sensible ID strings by the respective factories, but what should AT+CGMI and AT+CGMM queries return when the device is a Huawei GTM900 or Tango modem that has been converted to FreeCalypso with a firmware change? Before the present change they would return compiled-in defaults of "<manufacturer>" and "<model>", respectively; with the present change the firmware will self-identify as "FreeCalypso GTM900-FC" or "FreeCalypso Tango" on the two respective targets. This firmware identification will become important if someone incorporates an FC-converted GTM900 or Tango modem into a ZeroPhone-style smartphone where some high-level software like ofono will be talking to the modem and will need to properly identify this modem as FreeCalypso, as opposed to some other AT command modem flavor with different quirks. In technical terms, the compiled-in default for the AT+CGMI query (which will always be overridden by the /pcm/CGMI file in FFS if one is present) is now "FreeCalypso" in all configs on all targets; the compiled-in default for the AT+CGMM query (likewise always overridden by /pcm/CGMM if present) is "GTM900-FC" if CONFIG_TARGET_GTM900 or "Tango" if CONFIG_TARGET_TANGO or the original default of "<model>" otherwise.

# This patch applies to the Init_Target() function in the init.obj module in
# main.lib; the present version is for making TCS211 run on the Pirelli.
# This patch sets the same memory and peripheral chip select timings and
# widths as Pirelli's fw.

[init.obj]

# value goes into nCS0, nCS1 and nCS3 config registers
.text 66 A4
# the nCS2 setting in our original blob is already correct for the Pirelli

# value goes into nCS4 config reg
.text 72 A7

# nop out the write into 0x02700000

.text 128 C0
.text 129 46