FreeCalypso > hg > fc-magnetite
view src/cs/system/bootloader/inc/protocol.h @ 685:3fb7384e820d
tpudrv12.h: FCDEV3B goes back to being itself
A while back we had the idea of a FreeCalypso modem family whereby our
current fcdev3b target would some day morph into fcmodem, with multiple
FC modem family products, potentially either triband or quadband, being
firmware-compatible with each other and with our original FCDEV3B. But
in light of the discovery of Tango modules that earlier idea is now being
withdrawn: instead the already existing Tango hw is being adopted into
our FreeCalypso family.
Tango cannot be firmware-compatible with triband OM/FCDEV3B targets
because the original quadband RFFE on Tango modules is wired in TI's
original Leonardo arrangement. Because this Leonardo/Tango way is now
becoming the official FreeCalypso way of driving quadband RFFEs thanks
to the adoption of Tango into our FC family, our earlier idea of
extending FIC's triband RFFE control signals with TSPACT5 no longer makes
much sense - we will probably never produce any new hardware with that
once-proposed arrangement. Therefore, that triband-or-quadband FCFAM
provision is being removed from the code base, and FCDEV3B goes back to
being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control
purposes.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 24 Sep 2020 21:03:08 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/****************************************************************************** * FLUID (Flash Loader Utility Independent of Device) * * (C) Delta Technologies 2001. * Cleanup, modifications and extensions by Mads Meisner-Jensen, mmj@ti.com. * * Target/PC protocol definition * * $Id: protocol.h 1.9 Wed, 31 Oct 2001 11:47:00 +0100 mmj $ * ******************************************************************************/ enum ProtocolChars { PROTO_HELLO = 'H', PROTO_BAUDRATE = 'B', PROTO_HARDWARE = 'H', PROTO_QUERY = 'Q', PROTO_QUERY_CHIP = 'C', PROTO_READY = 'R', PROTO_ISEMPTY = 'I', PROTO_DOWNLOAD = 'L', PROTO_DETECT = 'D', PROTO_ERASE = 'E', PROTO_COMPRESS = 'Z', PROTO_PROGRAM = 'P', PROTO_CKSUM = 'C', PROTO_READ = 'R', PROTO_RESET = '0', PROTO_ERROR_CKSUM = 'X', PROTO_ERROR_MEMORY = 'M', PROTO_ERROR_FLASH_TIMEOUT = 'T', PROTO_ERROR_FLASH_COMMAND = 'C', PROTO_ERROR_FLASH_VPP = 'P', PROTO_ERROR_FLASH_LOCKED = 'L', PROTO_ERROR_VERIFY = 'V', PROTO_CHECKSUM = 'C', PROTO_VERSION = 'V', PROTO_ERROR = '?', PROTO_TRACE = '$' }; // Not really part of the protocol but as this header file is included by // both PC side and target side source code, this is an easy place to put // these difinitions. enum ChipIdCodes { // Ulysses and Hercules CHIP_ID_ULYSSES_0 = 0xB2B5, CHIP_ID_ULYSSES_A = 0xB335, CHIP_ID_HERCULES_A = 0xB334, // Correct revision designation? CHIP_ID_HERCULES_B = 0xB32C, // Correct revision designation? // Samson and Calypso CHIP_ID_CALYPSO_A = 0xB2AC, CHIP_ID_CALYPSO_B = 0xB396 };
