FreeCalypso > hg > fc-magnetite
view src/cs/services/atp/atp_spp_api.h @ 685:3fb7384e820d
tpudrv12.h: FCDEV3B goes back to being itself
A while back we had the idea of a FreeCalypso modem family whereby our
current fcdev3b target would some day morph into fcmodem, with multiple
FC modem family products, potentially either triband or quadband, being
firmware-compatible with each other and with our original FCDEV3B. But
in light of the discovery of Tango modules that earlier idea is now being
withdrawn: instead the already existing Tango hw is being adopted into
our FreeCalypso family.
Tango cannot be firmware-compatible with triband OM/FCDEV3B targets
because the original quadband RFFE on Tango modules is wired in TI's
original Leonardo arrangement. Because this Leonardo/Tango way is now
becoming the official FreeCalypso way of driving quadband RFFEs thanks
to the adoption of Tango into our FC family, our earlier idea of
extending FIC's triband RFFE control signals with TSPACT5 no longer makes
much sense - we will probably never produce any new hardware with that
once-proposed arrangement. Therefore, that triband-or-quadband FCFAM
provision is being removed from the code base, and FCDEV3B goes back to
being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control
purposes.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 24 Sep 2020 21:03:08 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/******************************************************************************* * * File Name : atp_spp_api.h * * Definitions for the interface between ATP and SPP SW entity * * (C) Texas Instruments, all rights reserved * * Version number : 0.1 Date : 16-Marsh-2000 * * History : 0.1 - Created by E. Baissus * * * Author : Eric Baissus : e-baissus@ti.com * * (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved ******************************************************************************/ #ifndef ATP_SPP_API_H #define ATP_SPP_API_H #include "rv/rv_general.h" #include "rvf/rvf_api.h" #include "l2cap_gen.h" #include "spp_general.h" #include "atp/atp_api.h" #define SPP_ALL_THE_EVENTS (0xFF) #define SPP_RX_HEAD_SIZE (SPP_TX_OFFSET) #define SPP_RX_TRAIL_SIZE (SPP_TX_LENGTH-(SPP_TX_OFFSET)) /* Types and definition used between ATP and SPP */ typedef enum { ATP_IS_SERVER, ATP_IS_CLIENT } T_ATP_IS_SERVER; /* Custom information used during a new open port request to spp */ typedef enum { ATP_PAYLOAD_LENGTH_RENEG_ON, ATP_PAYLOAD_LENGTH_RENEG_OFF } T_ATP_PAYLOAD_LENTH_RENEG_EN; typedef enum { ATP_AUTOMATIC_FLOW_CTRL_ON, ATP_AUTOMATIC_FLOW_CTRL_OFF } T_ATP_SPP_FLOW_CONTROL_MODE; typedef struct { T_ATP_CUSTOM_TYPE custom_type; T_BD_ADDR bd_addr; UINT16 server_channel; UINT16 max_payload_length; // max = 32 KBytes T_ATP_PAYLOAD_LENTH_RENEG_EN max_payload_length_reneg_en; T_RVF_MB_ID rx_mb; T_ATP_SPP_FLOW_CONTROL_MODE flow_ctrl_mode; T_ATP_IS_SERVER is_server; } T_ATP_CUSTOM_TO_SPP_INFO; /* Custom information used during a new open port response by spp */ typedef struct { T_ATP_CUSTOM_TYPE custom_type; T_BD_ADDR bd_addr; UINT16 max_payload_length; } T_ATP_CUSTOM_FROM_SPP_INFO; /* Custom Commands exchanged with SPP : see atp_send_cmd and ATP_CMD_RDY definitions*/ #define ATP_FROM_SPP_MAX_PAYLOAD_IND_CMD (0) // custom info is the payload value (UINT32) #define ATP_FROM_SPP_REG_SERVER_ERROR (1) // No custom info extern T_RV_RET atp_spp_init(T_RVF_ADDR_ID addr_id, T_RVF_MB_ID mb_id); extern T_RV_RET atp_spp_start(void); #endif