FreeCalypso > hg > fc-magnetite

view src/cs/layer1/gtt_include/ctm/ucs_functions.h @ 685:3fb7384e820d

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
tpudrv12.h: FCDEV3B goes back to being itself A while back we had the idea of a FreeCalypso modem family whereby our current fcdev3b target would some day morph into fcmodem, with multiple FC modem family products, potentially either triband or quadband, being firmware-compatible with each other and with our original FCDEV3B. But in light of the discovery of Tango modules that earlier idea is now being withdrawn: instead the already existing Tango hw is being adopted into our FreeCalypso family. Tango cannot be firmware-compatible with triband OM/FCDEV3B targets because the original quadband RFFE on Tango modules is wired in TI's original Leonardo arrangement. Because this Leonardo/Tango way is now becoming the official FreeCalypso way of driving quadband RFFEs thanks to the adoption of Tango into our FC family, our earlier idea of extending FIC's triband RFFE control signals with TSPACT5 no longer makes much sense - we will probably never produce any new hardware with that once-proposed arrangement. Therefore, that triband-or-quadband FCFAM provision is being removed from the code base, and FCDEV3B goes back to being treated the same way as CONFIG_TARGET_GTAMODEM for RFFE control purposes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 24 Sep 2020 21:03:08 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/*
*******************************************************************************
*
*      COPYRIGHT (C) 2000 BY ERICSSON EUROLAB DEUTSCHLAND GmbH
*      90411 NUERNBERG, GERMANY, Tel Int + 49 911 5217 100
*
*      The program(s) may be used and/or copied only with the
*      written permission from Ericsson or in accordance
*      with the terms and conditions stipulated in the agreement or
*      contract under which the program(s) have been supplied.
*
*******************************************************************************
*
*      File             : baudot_functions.h
*      Author           : EEDN/RV Matthias Doerbecker
*      Tested Platforms : Windows NT 4.0
*      Description      : header file for ucs_functions.c
*
*      Revision history
*
*      $Log: $
*
*******************************************************************************
*/
#ifndef ucs_functions_h
#define ucs_functions_h "$Id: $"

/*
*******************************************************************************
*                         INCLUDE FILES
*******************************************************************************
*/

#include "fifo.h"

/*
*******************************************************************************
*                         DEFINITIONS
*******************************************************************************
*/

/****************************************************************************/
/* convertChar2UCScode()                                                    */
/* *********************                                                    */
/* Conversion from character into UCS code                                  */
/* (Universal Multiple-Octet Coded Character Set, Row 00                    */
/* of the Multilingual plane according to ISO/IEC 10646-1).                 */
/* This routine only handles characters in the range 0...255 since that is  */
/* all that is required for the demonstration of Baudot support.            */
/*                                                                          */
/* input variables:                                                         */
/* - inChar       charcater that shall be converted                         */
/*                                                                          */
/* return value:  UCS code of the input character                           */
/*                or 0xFFFF in case that inChar is not valid                */
/*                (e.g. inChar=='\0')                                       */
/*                                                                          */
/* Matthias Doerbecker, Ericsson Eurolab Deutschland (EED/N/RV), 2000/09/18 */
/****************************************************************************/

UWORD16 convertChar2UCScode(char inChar);


/****************************************************************************/
/* convertUCScode2char()                                                    */
/* *********************                                                    */
/* Conversion from UCS code into character                                  */
/* This routine only handles characters in the range 0...255 since that is  */
/* all that is required for the demonstration of Baudot support.            */
/*                                                                          */
/* input variables:                                                         */
/* - ucsCode      UCS code index,                                           */
/*                must be within the range 0...255 if BITS_PER_SYMB==8,     */
/*                or in the range 0...63 if BITS_PER_SYMB==6,               */
/*                                                                          */
/* return value:  character (or '\0' if ucsCode is not valid)               */
/*                                                                          */
/* Matthias Doerbecker, Ericsson Eurolab Deutschland (EED/N/RV), 2000/09/18 */
/****************************************************************************/

char convertUCScode2char(UWORD16 ucsCode);


/****************************************************************************/
/* transformUCS2UTF()                                                       */
/* ******************                                                       */
/* Transformation from UCS code into UTF-8. UTF-8 is a sequence consisting  */
/* of 1, 2, 3, or 5 octets (bytes). See ISO/IEC 10646-1 Annex G.            */
/*                                                                          */
/* This routine only handles UCS codes in the range 0...0xFF since that is  */
/* all that is required for the demonstration of Baudot support.            */
/*                                                                          */
/* input variables:                                                         */
/* - ucsCode               UCS code index,                                  */
/*                                                                          */
/* output variables:                                                        */
/* - ptr_octet_fifo_state  pointer to the output fifo state buffer for      */
/*                         the UTF-8 octets.                                */
/*                                                                          */
/* Matthias Doerbecker, Ericsson Eurolab Deutschland (EED/N/RV), 2000/06/29 */
/****************************************************************************/

void transformUCS2UTF(UWORD16      ucsCode,
                      fifo_state_t*  ptr_octet_fifo_state);


/****************************************************************************/
/* transformUTF2UCS()                                                       */
/* ******************                                                       */
/* Transformation from UTF-8 into UCS code.                                 */
/*                                                                          */
/* This routine only handles UTF-8 sequences consisting of one or two       */
/* octets (corresponding to UCS codes in the range 0...0xFF) since that is  */
/* all that is required for the demonstration of Baudot support.            */
/*                                                                          */
/* input/output variables:                                                  */
/* - ptr_octet_fifo_state  pointer to the input fifo state buffer for       */
/*                         the UTF-8 octets.                                */
/*                                                                          */
/* output variables:                                                        */
/* - *ptr_ucsCode          UCS code index                                   */
/*                                                                          */
/* return value:                                                            */
/* true,  if conversion was successful                                      */
/* false, if the input fifo buffer didn't contain enough octets for a       */
/*        conversion into UCS code. The output variable *ptr_ucsCode        */
/*        doesn't contain a valid value in this case                        */
/*                                                                          */
/* Matthias Doerbecker, Ericsson Eurolab Deutschland (EED/N/RV), 2000/06/29 */
/****************************************************************************/

BOOL transformUTF2UCS(UWORD16     *ptr_ucsCode,
                      fifo_state_t  *ptr_octet_fifo_state);


#endif