view src/g23m-fad/tcpip/rnet/rnet_env.h @ 629:3231dd9b38c1

armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 90eb61ecd093
children
line wrap: on
line source

/**
 * @file  rnet_env.h
 *
 * Riviera NET.
 *
 * Declarations of the Riviera Generic Functions
 *
 * @author  Vincent Oberle (v-oberle@ti.com)
 * @version 0.1
 */

/*
 * History:
 *
 *  Date         Author        Modification
 *  -------------------------------------------------------------------
 *  01/29/2002  Vincent Oberle    Create
 *
 * (C) Copyright 2002 by Texas Instruments Incorporated, All Rights Reserved
 */

#ifndef __RNET_ENV_H_
#define __RNET_ENV_H_

#include "rvm_gen.h" /* Generic RVM types and functions. */
#include "rvf_pool_size.h" /* Stack & Memory Bank sizes definitions */

/**
 * @name Memory bank size and stack size
 *
 * Memory bank size and watermark.
 * Wished task stack in bytes.
 */
/*@{*/
#ifdef RVF_RNET_MB1_SIZE
#define RNET_MB_PRIM_SIZE RVF_RNET_MB1_SIZE
#else
#define RNET_MB_PRIM_SIZE 500
#endif
#define RNET_MB_PRIM_WATERMARK (RNET_MB_PRIM_SIZE - 100)
/*@}*/

/**
 * @name Generic functions
 *
 * Generic functions declarations needed for a type 2 SWE
 * (Group Member SWE).
 */
/*@{*/
T_RVM_RETURN rnet_get_info (T_RVM_INFO_SWE *info_swe);

T_RVM_RETURN rnet_set_info (T_RVF_ADDR_ID addr_id,
              T_RV_RETURN_PATH return_path[],
              T_RVF_MB_ID bk_id_table[],
              T_RVM_CB_FUNC call_back_error_ft);

T_RVM_RETURN rnet_init (void);
T_RVM_RETURN rnet_start (void);

T_RVM_RETURN rnet_stop (void);
T_RVM_RETURN rnet_kill (void);
/*@}*/

#endif /* __RNET_ENV_H_ */