FreeCalypso > hg > fc-magnetite
view src/g23m-fad/tcpip/include/rvm_priorities.h @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 02 Jan 2020 05:38:26 +0000 |
| parents | 90eb61ecd093 |
| children |
line wrap: on
line source
/**************************************************************************** * * * Name rvm_priorities.h * * * * Function this file priorities defintitions for basic SWEs * * It includes a file rvm_ext_priorities.h where are defined * * "custom" priorities. * * * * Version 0.1 * * * * Date Modification * * ------------------------------------ * * 10/11/2000 Create * * * * Author Cristian Livadiotti (c-livadiotti@ti.com) * * * * (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved* ****************************************************************************/ #ifndef __RVM_PRIORITIES_H_ #define __RVM_PRIORITIES_H_ #include "rvm_ext_priorities.h" /* PRIORITIES SETTING: */ /* All user priority should be set under 250: */ /* Higher values are reserved */ /* ** Bluetooth Priorities: ** All set to same value, except ATP (not a task) and HCI (valid on PC only) */ #define RVM_HCI_TASK_PRIORITY (250) #define RVM_L2CAP_TASK_PRIORITY (240) #define RVM_BTCTRL_TASK_PRIORITY (240) #define RVM_RFCOMM_TASK_PRIORITY (240) #define RVM_SPP_TASK_PRIORITY (240) #define RVM_SDP_TASK_PRIORITY (240) #define RVM_HSG_TASK_PRIORITY (240) #define RVM_DUN_GW_TASK_PRIORITY (240) #define RVM_FAX_GW_TASK_PRIORITY (240) #define RVM_ATP_UART_TASK_PRIORITY (240) #define RVM_ATP_TASK_PRIORITY (255) /* ** Drivers and Services Priorities ** Note: FFS priority should be lower than every user */ #define RVM_SPI_TASK_PRIORITY (39) #define RVM_TTY_TASK_PRIORITY (240) #define RVM_AUDIO_TASK_PRIORITY (245) #define RVM_AUDIO_BGD_TASK_PRIORITY (246) #define RVM_RTC_TASK_PRIORITY (248) #define RVM_FFS_TASK_PRIORITY (250) #define RVM_TRACE_TASK_PRIORITY (251) #define RVM_DAR_TASK_PRIORITY (245) #define RVM_ETM_TASK_PRIORITY (249) #define RVM_MKS_TASK_PRIORITY (255) #define RVM_KPD_TASK_PRIORITY (10) #define RVM_MPM_TASK_PRIORITY (242) #define RVM_RNET_WS_TASK_PRIORITY (80) #define RVM_RNET_RT_TASK_PRIORITY (240) #define RVM_DCM_TASK_PRIORITY (240) #define RVM_MFW_TASK_PRIORITY (245) /* ** RV Test Menu and Dummy Tasks Priorities */ #define RVM_RVTEST_MENU_TASK_PRIORITY (240) #define RVM_DUMMY_TASK_PRIORITY (80) //#define IDLE_TASK_PRIORITY (80) /* A-M-E-N-D-E-D! */ #define RVM_INVKR_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE1_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE2_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE3_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE4_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE5_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE6_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TMS_TASK_PRIORITY (200) /* A-M-E-N-D-E-D! */ #endif /* __RVM_PRIORITIES_H_ */