armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.

/**
 * @file   mks_cfg.h
 *
 * Configuration file for MKS service.
 *
 * This file is part of the MKS API.
 *
 * @author   Laurent Sollier (l-sollier@ti.com)
 * @version 0.1
 */

/*
 * History:
 *
 *   Date          Author       Modification
 *  ----------------------------------------
 *  11/19/2001     L Sollier    Create
 *
 *
 * (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved
 */

#ifndef _MKS_CFG_H_
#define _MKS_CFG_H_



/** Define the number max of magic key sequence.
 */
#define MKS_NB_MAX_OF_KEY_SEQUENCE (5)

/** Define the number max of key in a magic key sequence.
 */
#define MKS_NB_MAX_OF_KEY_IN_KEY_SEQUENCE (10)

/** Define the number max of notified key for post sequence.
 */
#define MKS_NB_MAX_OF_KEY_FOR_POST_SEQUENCE (10)

/** Define time to wait (ms) between two keys before the key sequence reset.
 */
#define MKS_TIME_RESET_KEY_SEQUENCE 3000

/** Define the maximum size for key sequence name
 */
#define KPD_MAX_CHAR_NAME 20

#endif /* _MKS_CFG_H_ */