FreeCalypso > hg > fc-magnetite

view src/cs/services/dar/tests/dar_test_misc.c @ 629:3231dd9b38c1

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/********************************************************************************/
/*                                                                              */
/*   File Name:   dar_test_misc.c                                               */
/*                                                                              */
/*   Purpose:   This file gathers misc tests for DAR.                           */
/*                                                                              */
/*   Note:    None.                                                             */
/*                                                                              */
/*   Version    0.1                                                             */
/*                                                                              */
/*   Date            Modification                                               */
/*   ---------------------------------------------------------------------------*/
/*   5 November 2001   Create                                                   */
/*                                                                              */
/*   Author         Stephanie Gerthoux                                          */
/*                                                                              */
/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved    */
/********************************************************************************/

/********************************************************************************/
/*                                                                              */
/*   Include files used for DAR riviera testing.                                */
/*                                                                              */
/********************************************************************************/

#include "rv/rv_defined_swe.h"
#include "dar/tests/dar_test.h"

#ifdef RVM_DAR_SWE
#if (DAR_MISC == SW_COMPILED)

   #include "rv/rv_general.h"
   #include "rvm/rvm_gen.h"
   #include "dar/tests/dar_test_regr.h"
   #include "dar/tests/dar_test_misc.h"
   #include "dar/dar_api.h"
   #include "dar/dar_structs_i.h"
   #include "dar/dar_messages_i.h"
   #include "rvf/rvf_target.h"
   #include "dar/dar_const_i.h"
   #include "dar/dar_error_hdlr_i.h"
   #include "dar/dar_macro_i.h"

   /********************************************************************************/
   /*                                                                              */
   /*      Function Name:    dar_test_misc                                         */
   /*                                                                              */
   /*      Purpose:   This function executes the DAR misc tests.                   */
   /*                                                                              */
   /*      Input Parameters:                                                       */
   /*            test number.                                                      */
   /*                                                                              */
   /*      Output Parameters:                                                      */
   /*            None.                                                             */
   /*                                                                              */
   /*      Note:                                                                   */
   /*            None.                                                             */
   /*                                                                              */
   /*      Revision History:                                                       */
   /*            5 November 2001    Stephanie Gerthoux: Creation.                  */
   /*                                                                              */
   /********************************************************************************/
   
   T_RV_MISC_RET dar_test_misc (T_RV_MISC_TEST_NBR test_number)
   {

      T_RV_MISC_ERR_TYPE   error_type   = NO_ERR;
      T_RV_MISC_RET        test_verdict = TEST_PASSED;
   

      /************************* Start dar_test_misc function *************************/

      RV_TEST_TRACE_HIGH ("**************** START DAR MISC ****************");

      /************************************************************************/
      /*                                                                      */
      /*   Memory dump -> check memory and stack used before testing.         */
      /*                                                                      */
      /************************************************************************/
      rvf_dump_mem ();
      rvf_dump_tasks();

      switch (test_number)
      {
         case 1:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 1: Dar filter start- add a group");
            test_verdict = dar_regr_test_1 (&error_type);
            break;
         }
         case 2:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 2: Dar filter start- search a group");
            test_verdict = dar_regr_test_2 (&error_type);
            break;
         }
         case 3:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 3: Dar filter start- delete a group");
            test_verdict = dar_regr_test_3 (&error_type);
            break;
         }

         case 4:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 4: DAR filter - add more than DAR max number group ");
            test_verdict = dar_regr_test_4 (&error_type);
            break;
         }

         case 5:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 5: DAR write function ");
            test_verdict = dar_regr_test_5 (&error_type);
            break;
         }

         case 6:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 6: DAR write function with bad debug level");
            test_verdict = dar_regr_test_6 (&error_type);
            break;
         }
         
         case 7:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 7: DAR write function - Long data ");
            test_verdict = dar_regr_test_7 (&error_type);
            break;
         }

         case 8:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 8: DAR write function - Store 2 string");
            test_verdict = dar_regr_test_8 (&error_type);
            break;
         }
         
         case 9:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 9: DAR write function - DAR_NO_DIAGNOSE message");
            test_verdict = dar_regr_test_9 (&error_type);
            break;
         }
         
         case 10:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 10: DAR emergency function ( PC)");
            test_verdict = dar_regr_test_10 (&error_type);
            break;
         }
                           
         case 11:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 11: DAR recovery get status after an ON/OFF");
            test_verdict = dar_regr_test_11 (&error_type);
            break;
         }

         case 12:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 12: DAR reset system");
            test_verdict = dar_regr_test_12 (&error_type);
            break;
         }

         case 13:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 13: DAR diagnose generate emergency (board)");
            test_verdict = dar_regr_test_13 (&error_type);
            break;
         }

         case 14:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 14: DAR start watchdog timer");
            test_verdict = dar_regr_test_14 (&error_type);
            break;
         }

         case 15:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 15: DAR reload watchdog timer");
            test_verdict = dar_regr_test_15 (&error_type);
            break;
         }

         case 16:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 16: DAR start watchdog timer + infinite loop");
            test_verdict = dar_regr_test_16 (&error_type);
            break;
         }

         case 17:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 17: DAR start watchdog timer + stop + infinite loop");
            test_verdict = dar_regr_test_17 (&error_type);
            break;
         }

         case 18:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 18: DAR Exception: Jump to unknown address ");
            test_verdict = dar_regr_test_18 (&error_type);
            break;
         }

         case 19:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 19: DAR Exception : Jump to variables address");
            test_verdict = dar_regr_test_19 (&error_type);
            break;
         }

         case 20:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 20: DAR recovery get status and get recovery data");
            test_verdict = dar_regr_test_20 (&error_type);
            break;
         }
 
         case 21:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 21: DAR - Branch to 0 with a callback = NULL ");
            test_verdict = dar_regr_test_21 (&error_type);
            break;
         }

         case 22:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 22: Redirect trace(Warning/Error) to DAR");
            test_verdict = dar_regr_test_22 (&error_type);
            break;
         }

         case 23:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 23: Redirect trace(Warning/Error) to DAR");
            test_verdict = dar_regr_test_23 (&error_type);
            break;
         }
         
         case 24:
         {
            RV_TEST_TRACE_HIGH ("**DAR TEST REGR 24: Redirect trace(Error/Warning) to DAR");
            test_verdict = dar_regr_test_24 (&error_type);
            break;
         }                  

         default:
         {
            RV_TEST_TRACE_ERROR ("!!! ERROR !!! Invalid DAR test_number value for misc test_type");
            test_verdict = TEST_IRRECOVERABLY_FAILED;
            break;
         }
      
      } /* switch */

      trace_dar_test_verdict (test_verdict,
                              0,
                              test_number,
                              &error_type);

      trace_dar_test_verdict (test_verdict,
                              test_number,
                              test_number,
                              &error_type);
      /************************************************************************/
      /*                                                                      */
      /*   Memory dump -> check memory and stack used before testing          */
      /*                                                                      */
      /************************************************************************/
      rvf_dump_mem ();
      rvf_dump_tasks();

      return (test_verdict);
   }

   /************************** Stop dar_test_misc function *************************/

 #endif /* #ifdef RVM_DAR_SWE */
#endif /* #if (DAR_MISC == SW_COMPILED) */