FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_core/timer/timer.c @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 02 Jan 2020 05:38:26 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/******************************************************************************* TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION Property of Texas Instruments -- For Unrestricted Internal Use Only Unauthorized reproduction and/or distribution is strictly prohibited. This product is protected under copyright law and trade secret law as an unpublished work. Created 1987, (C) Copyright 1997 Texas Instruments. All rights reserved. Filename : timer.c Description : timer.c Project : drivers Author : pmonteil@tif.ti.com Patrice Monteil. Version number : 1.3 Date and time : 07/23/98 16:25:32 Previous delta : 07/23/98 16:25:32 SCCS file : /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release1.5/mod/emu/EMU_MCMP/eva3_drivers/source/SCCS/s.timer.c Sccs Id (SID) : '@(#) timer.c 1.3 07/23/98 16:25:32 ' *****************************************************************************/ #include "l1sw.cfg" #if (OP_L1_STANDALONE == 0) #include "main/sys_types.h" #else #include "sys_types.h" #endif #include "memif/mem.h" #include "inth/iq.h" #include "timer.h" /*-------------------------------------------------------------- * TIMER_Read() *-------------------------------------------------------------- * Parameters : num of the register to be read * Return :value of the timer register read * Functionality : read one of the TIMER register *--------------------------------------------------------------*/ SYS_UWORD16 TIMER_Read (unsigned short regNum) { volatile SYS_UWORD16 timerReg; switch (regNum) { case 0: timerReg = (( * (SYS_UWORD16 *) TIMER_CNTL_REG) & TIMER_CNTL_MASK); break; case 1: timerReg = ( * (SYS_UWORD16 *) TIMER_READ_REG); break; case 2: timerReg = (( * (SYS_UWORD16 *) TIMER_MODE_REG) & TIMER_MODE_MASK); break; default: break; } return(timerReg); } /*-------------------------------------------------------------- * TM_ResetTimer() *-------------------------------------------------------------- * Parameters : timer number (1 or 2) * timer value, reload yes or not, scale * Return : none * Functionality : Give the timewr state *--------------------------------------------------------------*/ void TM_ResetTimer (SYS_UWORD16 timerNum, SYS_UWORD16 countValue, SYS_UWORD16 autoReload, SYS_UWORD16 clockScale) { volatile SYS_UWORD16 *cntl; if (timerNum == 1) { cntl = (volatile SYS_UWORD16 *) TIMER1_CNTL; *cntl &= ~(START_STOP | PTV); /* stop and reset values */ (autoReload) ? (*cntl |= AR) : (*cntl &= ~AR); *cntl |= (clockScale << 2 ); * (SYS_UWORD16 *) TIMER1_LOAD_TIM = countValue; /*load the value */ *cntl |= START_STOP; } else { cntl = (volatile SYS_UWORD16 *) TIMER2_CNTL; *cntl &= ~(START_STOP | PTV); /* stop and reset values */ (autoReload) ? (*cntl |= AR) : (*cntl &= ~AR); *cntl |= (clockScale << 2 ); * (SYS_UWORD16 *) TIMER2_LOAD_TIM = countValue; /*load the value */ *cntl |= START_STOP; } } /* * TM_StopTimer * * Parameters : timer number (1 or 2) */ void TM_StopTimer (int timerNum) { volatile SYS_UWORD16 *cntl; if (timerNum == 1) { cntl = (volatile SYS_UWORD16 *) TIMER1_CNTL; } else { cntl = (volatile SYS_UWORD16 *) TIMER2_CNTL; } *cntl &= ~START_STOP; } /* * TM_ReadTimer * * Returns current timer value * * Parameters : timer number (1 or 2) * */ SYS_UWORD16 TM_ReadTimer (int timerNum) { if (timerNum == 1) { return (* (SYS_UWORD16 *) TIMER1_READ_TIM); } else { return (* (SYS_UWORD16 *) TIMER2_READ_TIM); } } /* * TM_StartTimer * * Parameters : timer number (1 or 2) * */ void TM_StartTimer (int timerNum) { volatile SYS_UWORD16 *cntl; if (timerNum == 1) { cntl = (volatile SYS_UWORD16 *) TIMER1_CNTL; } else { cntl = (volatile SYS_UWORD16 *) TIMER2_CNTL; } *cntl |= START_STOP; } void TM_DisableWatchdog (void) { /* volatile variable needed due C to optimization */ volatile SYS_UWORD16 *reg = (volatile SYS_UWORD16 *) TIMER_MODE_REG; *reg = 0xf5; *reg = 0xa0; } /* * TM_EnableWatchdog * */ void TM_EnableWatchdog(void) { * ((volatile SYS_UWORD16 *) TIMER_MODE_REG) = TIMER_WDOG; } /* * TM_ResetWatchdog * * Parameter : Tick count * Use a different value each time, otherwise watchdog bites */ void TM_ResetWatchdog(SYS_UWORD16 count) { * ((volatile SYS_UWORD16 *) TIMER_LOAD_REG) = count; } /* * TM_EnableTimer (int TimerNum) * * Parameter : TimerNum : timer to enable (timer1 or timer2) * */ void TM_EnableTimer (int TimerNum) { volatile SYS_UWORD16 *cntl; if (TimerNum == 1) { cntl = (volatile SYS_UWORD16 *) TIMER1_CNTL; } else { cntl = (volatile SYS_UWORD16 *) TIMER2_CNTL; } *cntl |= TIMER_CLK_EN; } /* * TM_DisableTimer (int TimerNum) * * Parameter : TimerNum : timer to enable (timer1 or timer2) * */ void TM_DisableTimer (int TimerNum) { volatile SYS_UWORD16 *cntl; if (TimerNum == 1) { cntl = (volatile SYS_UWORD16 *) TIMER1_CNTL; } else { cntl = (volatile SYS_UWORD16 *) TIMER2_CNTL; } *cntl &= ~TIMER_CLK_EN; } /*-------------------------------------------------------------- * TIMER_ReadValue() *-------------------------------------------------------------- * Parameters : none * Return : none * Functionality : Read timer value *--------------------------------------------------------------*/ unsigned short TIMER_ReadValue (void) { return(* (SYS_UWORD16 *) TIMER_READ_REG); } /*-------------------------------------------------------------- * TIMER_WriteValue() *-------------------------------------------------------------- * Parameters : none * Return : none * Functionality : Write timer value *--------------------------------------------------------------*/ void TIMER_WriteValue (SYS_UWORD16 value) { * (SYS_UWORD16 *) TIMER_LOAD_REG = value; /*load the value */ }
