FreeCalypso > hg > fc-magnetite

view src/cs/drivers/drv_core/inth/inth.c @ 629:3231dd9b38c1

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/*******************************************************************************
            TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION           
                                                                             
   Property of Texas Instruments -- For  Unrestricted  Internal  Use  Only 
   Unauthorized reproduction and/or distribution is strictly prohibited.  This 
   product  is  protected  under  copyright  law  and  trade  secret law as an 
   unpublished work.  Created 1987, (C) Copyright 1997 Texas Instruments.  All 
   rights reserved.                                                            
                  
                                                           
   Filename       	: inth.c

   Description    	: inth.c saturn interupt handler

   Project        	: drivers

   Author         	: pmonteil@tif.ti.com  Patrice Monteil.

   Version number   : 1.15

   Date             : 05/23/03

   Previous delta 	: 12/19/00 14:39:21

   SCCS file      	: /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release_gprs/RELEASE_GPRS/drivers1/common/SCCS/s.inth.c

   Sccs Id  (SID)       : '@(#) inth.c 1.8 01/30/01 10:22:26 '

 
*****************************************************************************/

#include "l1sw.cfg"
#include "chipset.cfg"


#if (CHIPSET != 12)

#if (OP_L1_STANDALONE == 0)
  #include "main/sys_types.h"
#else
  #include "sys_types.h"
#endif
#include "memif/mem.h"
#include "inth.h"

/*--------------------------------------------------------------
 *  INTH_Ack()							
 *--------------------------------------------------------------
 * Parameters : num of it					
 * Return     :	none						
 * Functionality :Acknowledge an interrupt and return the origin
 *	of the interrupt (binary format)			
 *--------------------------------------------------------------*/

SYS_UWORD16 INTH_Ack (int intARM)
{
   if (intARM == INTH_IRQ)
	return((* (volatile SYS_UWORD16 *) INTH_B_IRQ_REG) & INTH_SRC_NUM);
   else
	return((* (volatile SYS_UWORD16 *) INTH_B_FIQ_REG) & INTH_SRC_NUM);
}
	
/*--------------------------------------------------------------
 *  INTH_GetPending()						
 *--------------------------------------------------------------
 * Parameters : none						
 * Return     :	none						
 * Functionality : Return the pending interrupts 		
 *--------------------------------------------------------------*/

#if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11))
  unsigned long INTH_GetPending (void)
  {
    return((unsigned long)((* (volatile SYS_UWORD16 *) INTH_IT_REG1) | 
           ((* (volatile SYS_UWORD16 *) INTH_IT_REG2) << 16)));
  }		
#else
  unsigned short INTH_GetPending (void)
  {
    return(* (volatile SYS_UWORD16 *) INTH_IT_REG);
  }		
#endif

/*--------------------------------------------------------------
 *  INTH_InitLevel()
 *--------------------------------------------------------------
 * Parameters : num it,FIQ/IRQ,priority level,edge/level.
 * Return     :	none
 * Functionality : Initialize an interrupt
 *		   - put it on IRQ or FIQ
 *		   - set its priority level
 *						 		
 *--------------------------------------------------------------*/

void INTH_InitLevel (int inputInt, int FIQ_nIRQ, int priority, int edge)
{
   volatile SYS_UWORD16 *inthLevelReg = (SYS_UWORD16 *) INTH_EXT_REG; 

   inthLevelReg = inthLevelReg + inputInt;

#if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11))
   *inthLevelReg = (FIQ_nIRQ | (edge << 1) | (priority << 2));
#else
   *inthLevelReg = (FIQ_nIRQ | (priority << 1) | (edge << 5));
#endif
}

/*--------------------------------------------------------------
 *  INTH_ResetIT()
 *--------------------------------------------------------------
 * Parameters : none
 * Return     :	none
 * Functionality : reset the inth it register
 *--------------------------------------------------------------*/

#if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11))
  unsigned long INTH_ResetIT (void)
  {
    * (volatile SYS_UWORD16 *) INTH_IT_REG1 &= 0x0000; 
    * (volatile SYS_UWORD16 *) INTH_IT_REG2 &= 0x0000; 
    return((unsigned long)((* (volatile SYS_UWORD16 *) INTH_IT_REG1) | 
           ((* (volatile SYS_UWORD16 *) INTH_IT_REG2) << 16)));
  }
#else
  unsigned short INTH_ResetIT (void)
  {
    * (volatile SYS_UWORD16 *) INTH_IT_REG &= 0x0000; 
    return(* (volatile SYS_UWORD16 *) INTH_IT_REG);
  }
#endif


#endif /* endif chipset != 12 */