FreeCalypso > hg > fc-magnetite
view src/condat2/com/include/light.h @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 02 Jan 2020 05:38:26 +0000 |
| parents | 93999a60b835 |
| children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM (6301) | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Types definitions for the light emitting driver | . +----------------------------------------------------------------------------- */ #ifndef LIGHT_H #define LIGHT_H /* * devices */ #define LIGHT_DEVICE_BACKLIGHT 0 #define LIGHT_DEVICE_INSERVICELED 1 /* * device status */ #define LIGHT_STATUS_OFF 0 #define LIGHT_STATUS_ON 1 #define LIGHT_STATUS_DIMMED 2 #define LIGHT_STATUS_INTERMEDIATE 3 #define LIGHT_STATUS_BRIGHT 4 #define LIGHT_STATUS_GREEN 5 #define LIGHT_STATUS_ORANGE 6 #define LIGHT_STATUS_RED 7 #if defined (NEW_FRAME) /* * to achieve backward compatibility with older definitions */ #define drv_SignalCB_Type T_DRV_CB_FUNC #define drv_SignalID_Type T_DRV_SIGNAL #define T_VSI_THANDLE USHORT #endif /* * Prototypes */ EXTERN UBYTE light_Init (void); EXTERN void light_Exit (void); EXTERN UBYTE light_SetStatus (UBYTE in_DeviceID, UBYTE in_NewStatus); EXTERN UBYTE light_GetStatus (UBYTE in_DeviceID, UBYTE * in_StatusPtr); void light_setBacklightOn( void ); void light_setBacklightIdle( void ); void light_setBacklightOff( void ); #endif
