FreeCalypso > hg > fc-magnetite

view src/condat2/com/include/cl_list.h @ 629:3231dd9b38c1

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively, and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code for C-Sample and earlier turns them into GPIOs configured as outputs also driving 1 - so far, so good - but TI's code for BOARD 41 (which covers D-Sample, Leonardo and all real world Calypso devices derived from the latter) switches them from MCUEN to GPIOs, but then leaves them as inputs. Given that the hardware powerup state of these two pins is outputs driving 1, every Calypso board design MUST be compatible with such driving; typically these GPIO signals will be either unused and unconnected or connected as outputs driving some peripheral. Turning these pins into GPIO inputs will result in floating inputs on every reasonably-wired board, thus I am convinced that this configuration is nothing but a bug on the part of whoever wrote this code at TI. This floating input bug had already been fixed earlier for GTA modem and FCDEV3B targets; the present change makes the fix unconditional for all "classic" targets. The newly affected targets are D-Sample, Leonardo, Tango and GTM900.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Jan 2020 05:38:26 +0000
parents 93999a60b835
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  COMLIB
|  Modul   :  RR/PL
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions of global types used by List Processing functions
|             and the prototypes of those functions: RR/PL layer.
+----------------------------------------------------------------------------- 
*/ 

#ifndef CL_LIST_H
#define CL_LIST_H

/*==== CONST ================================================================*/

#define BITOFFSET_LIST          1024

#define MAX_BYTES_900           16
#define MAX_BYTES_EGSM          23
#define MAX_BYTES_1800          47
#define MAX_BYTES_1900          38
#define MAX_BYTES_DUAL          63
#define MAX_BYTES_850           16
#define MAX_BYTES_DUAL_EGSM     70
#define MAX_BYTES_DUAL_US       54

#define SET_CHANNEL_BIT     0
#define RESET_CHANNEL_BIT   1
#define GET_CHANNEL_BIT     2
#define CHECK_CHANNEL       3


#define T_LIST_MAX_SIZE 128 /* 1024/8 = 128 */
typedef struct
{
  UBYTE                 channels [T_LIST_MAX_SIZE];
} T_LIST;



/*==== MACROS ================================================================*/

#define srv_set_channel(list,ch)    scr_channel_bit(list,ch,SET_CHANNEL_BIT)
#define srv_unset_channel(list,ch)  scr_channel_bit(list,ch,RESET_CHANNEL_BIT)
#define srv_get_channel(list,ch)    scr_channel_bit(list,ch,GET_CHANNEL_BIT)

/*==== VARS =================================================================*/

/*==== TYPES =================================================================*/

/*==== FUNCTIONS ============================================================*/

EXTERN UBYTE  scr_channel_bit             (T_LIST              *list,
                                           int                  channel,
                                           int                  mode);
EXTERN int    srv_create_list             (T_LIST              *list,
                                           USHORT              *channel_array,
                                           USHORT              size,
                                           UBYTE               zero_at_start,
                                           USHORT              start_index);
EXTERN void   srv_clear_list              (T_LIST              *list);
EXTERN void   srv_copy_list               (T_LIST              *target_list,
                                           T_LIST              *source_list,
                                           UBYTE               size);
EXTERN UBYTE  srv_compare_list            (T_LIST              *list1,
                                           T_LIST              *list2);
EXTERN void   srv_merge_list              (T_LIST              *target_list,
                                           T_LIST              *list);
EXTERN void   srv_unmask_list             (T_LIST *target,T_LIST *source);
EXTERN void   srv_trace_freq_in_list      (T_LIST *list);
EXTERN U8     srv_get_region_from_std     (U8 std);
EXTERN U16    srv_count_list              (T_LIST *list);
extern BOOL   srv_is_list_set             (T_LIST *list);

#endif /* #ifndef CL_LIST_H */