FreeCalypso > hg > fc-magnetite
view src/aci2/atb/ATBDisplay.h @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 02 Jan 2020 05:38:26 +0000 |
| parents | 93999a60b835 |
| children |
line wrap: on
line source
/******************************************************************************* CONDAT (UK) ******************************************************************************** This software product is the property of Condat (UK) Ltd and may not be disclosed to any third party without the express permission of the owner. ******************************************************************************** $Project name: Basic MMI $Project code: BMI (6349) $Module: MMI $File: ATBDisplay.h $Revision: 1.0 $Author: Condat(UK) $Date: 22/02/01 ******************************************************************************** Description: ******************************************************************************** $History: ATBDisplay.h 15/03/02 Original Condat(UK) BMI version. Jan 16, 2006 DR: OMAPS00061460 - Shashi Shekar B.S. Description: SAT Icon support Solution : Added definitions for height & width of the title icon. $End *******************************************************************************/ #ifndef ATB_DISPLAY_H #define ATB_DISPLAY_H // Shashi Shekar B.S., a0876501, 16-Jan-2006, OMAPS00061460 #ifdef FF_MMI_SAT_ICON #define TITLE_ICON_WIDTH 10 #define TITLE_ICON_HEIGHT 16 extern const unsigned char SATIconQuestionMark[]; #endif /* * T_DS_TEXTFORMAT * Data type to contain formatting attributes */ typedef struct { UBYTE attr; /* Standard attributes */ BOOL highlight; /* TRUE if highlighting is on */ } T_DS_TEXTFORMAT; #define WHOLE_STRING 0xFFFF // Used to indicate that the whole string is to be used for a particular function /* Cursor types */ typedef enum { DS_CURSOR_NONE = 0, DS_CURSOR_BAR, DS_CURSOR_UNDERLINE, DS_CURSOR_BLOCK } T_DS_CURSOR; /* Alignments */ typedef enum { DS_ALIGN_LEFT = 0, DS_ALIGN_RIGHT = 1, DS_ALIGN_CENTRE = 2 } T_DS_ALIGN; /* Local function prototypes */ void ATB_display_Cursor (T_ATB_TEXT *text, USHORT textIndex, UBYTE type, SHORT x, SHORT y, USHORT width, USHORT height); void ATB_display_Text(SHORT x, SHORT y, T_DS_TEXTFORMAT *format, T_ATB_TEXT *text); void ATB_display_SetFormatAttr(T_DS_TEXTFORMAT *format, USHORT attr, BOOL highlight); void ATB_display_ClearFormat(T_DS_TEXTFORMAT *format); void ATB_display_CopyFormat(T_DS_TEXTFORMAT *dest, T_DS_TEXTFORMAT *src); int ATB_display_GetCharWidth (USHORT character, T_DS_TEXTFORMAT *format); int ATB_display_GetMaxCharWidth (T_DS_TEXTFORMAT *format); int ATB_display_GetCharHeight (USHORT character, T_DS_TEXTFORMAT *format); USHORT ATB_display_StringWidth(T_ATB_TEXT *text, T_DS_TEXTFORMAT *format); USHORT ATB_display_StringHeight(T_ATB_TEXT *text, T_DS_TEXTFORMAT *format); #endif