FreeCalypso > hg > fc-magnetite
view cdg3/cdginc-locosto/p_8010_134_mmpm_sap.val @ 629:3231dd9b38c1
armio.c: make GPIOs 8 & 13 outputs driving 1 on all "classic" targets
Calypso GPIOs 8 & 13 are pinmuxed with MCUEN1 & MCUEN2, respectively,
and on powerup these pins are MCUEN, i.e., outputs driving 1. TI's code
for C-Sample and earlier turns them into GPIOs configured as outputs also
driving 1 - so far, so good - but TI's code for BOARD 41 (which covers
D-Sample, Leonardo and all real world Calypso devices derived from the
latter) switches them from MCUEN to GPIOs, but then leaves them as inputs.
Given that the hardware powerup state of these two pins is outputs driving 1,
every Calypso board design MUST be compatible with such driving; typically
these GPIO signals will be either unused and unconnected or connected as
outputs driving some peripheral. Turning these pins into GPIO inputs will
result in floating inputs on every reasonably-wired board, thus I am
convinced that this configuration is nothing but a bug on the part of
whoever wrote this code at TI.
This floating input bug had already been fixed earlier for GTA modem and
FCDEV3B targets; the present change makes the fix unconditional for all
"classic" targets. The newly affected targets are D-Sample, Leonardo,
Tango and GTM900.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 02 Jan 2020 05:38:26 +0000 |
| parents | c15047b3d00d |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_8010_134_mmpm_sap.val | | SOURCE : "sap\8010_134_mmpm_sap.pdf" | | LastModified : "2003-07-29" | | IdAndVersion : "8010.134.02.007" | | SrcFileTime : "Thu Nov 29 09:27:04 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : MMPM * COMPATIBILITY_DEFINES : NO * ALWAYS_ENUM_IN_VAL_FILE: YES * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_8010_134_MMPM_SAP_VAL #define P_8010_134_MMPM_SAP_VAL #define CDG_ENTER__P_8010_134_MMPM_SAP_VAL #define CDG_ENTER__FILENAME _P_8010_134_MMPM_SAP_VAL #define CDG_ENTER__P_8010_134_MMPM_SAP_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_8010_134_MMPM_SAP_VAL__LAST_MODIFIED _2003_07_29 #define CDG_ENTER__P_8010_134_MMPM_SAP_VAL__ID_AND_VERSION _8010_134_02_007 #define CDG_ENTER__P_8010_134_MMPM_SAP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_27_04_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_8010_134_MMPM_SAP_VAL #undef CDG_ENTER__FILENAME #include "p_8010_137_nas_include.val" /* Access values independent from the corresponding h-file. */ #include "p_8010_152_ps_include.val" /* Access values independent from the corresponding h-file. */ #include "p_8010_153_cause_include.val" /* Access values independent from the corresponding h-file. */ /* * Enum to value table VAL_establish_cause * CCDGEN:WriteEnum_Count==26 */ #ifndef __T_MMPM_VAL_establish_cause__ #define __T_MMPM_VAL_establish_cause__ typedef enum { MMPM_CAUSE_ESTABL_ORIG_CONVERSATIONAL = 0x1, /* Originating conversational call */ MMPM_CAUSE_ESTABL_ORIG_STREAMING = 0x2, /* Originating streaming call */ MMPM_CAUSE_ESTABL_ORIG_INTERACTIVE = 0x3, /* Originating interactive call */ MMPM_CAUSE_ESTABL_ORIG_BACKGROUND = 0x4, /* Originating background call */ MMPM_CAUSE_ESTABL_ORIG_HIGH_PRIO_SIGNALLING = 0x5, /* Originating high priority signalling */ MMPM_CAUSE_ESTABL_ORIG_LOW_PRIO_SIGNALLING = 0x6 /* Originating low priority signalling */ }T_MMPM_VAL_establish_cause; #endif /* * Enum to value table VAL_reg_state * CCDGEN:WriteEnum_Count==27 */ #ifndef __T_MMPM_VAL_reg_state__ #define __T_MMPM_VAL_reg_state__ typedef enum { MMPM_RS_DEREGISTERED = 0x0, /* GMM context for SMS is removed */ MMPM_RS_REGISTERED = 0x1 /* GMM context for SMS is built */ }T_MMPM_VAL_reg_state; #endif /* * user defined constants */ #define MMPM_MAX_N_PDU_NUMBER_LIST (0x10) #include "CDG_LEAVE.h" #endif
