FreeCalypso > hg > fc-magnetite
view src/cs/services/cst/cus_cst.h @ 660:293c7db5f10f
bmi3: fixed the mysterious "mute on first call" bug
When UI-enabled fw boots on a previously blank (no /mmi/* files) FFS
for the first time, the output_volume member of the persistent UI settings
structure was left uninitialized, corresponding to the earpiece volume
being set to mute, which is an invalid setting. Because of other quirks
in the far-from-finished UI code, this volume setting takes effect only
when the first call is answered, producing the odd behaviour seen at the
user level.
The current fix is to set the blank-FFS default for output_volume to
volume level 4, which is the same -6 dB Iota volume as the ACI default.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 14 May 2020 02:50:41 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------+ | PROJECT : XXX SOURCE : CUS_CST.H | | AUTHOR : XXX VERSION: 1.0 | | CREATED : 01.02.99 STATE : code | +--------------------------------------------------------------------+ MODULE : CUS_CST PURPOSE : Custom dependent definitions for the CST entity of the mobile station. Use this header for definitions to integrate the protocol stack entity CST in your target system. */ #ifndef CUS_CST_H #define CUS_CST_H /*==== CONSTANTS ==================================================*/ /* * TIMER_VALUES * * Description : The constants define the timer values for the CST * timer TXXX depending on the various channel types * and service access point identifiers. * * If your target system uses other units please * change the values. */ /* * Unit is 1 ms */ #define T_RX_VALUE 1000 #define TICS_PER_DECIHOURS (1000*60*6) /* * MAX_CST_TIMER * * Description : The constant define the number of timer available * in the timer pool. */ #define MAX_CST_TIMER 4 /* * VERSION * * Description : The constants define the type and the value of a * version identification. The version is part of the * monitor struct. */ #define T_VERSION char #define VERSION_CST "CST 1.0" /* * VSI_CALLER * * Description : For multithread applications the constant VSI_CALLER * must be defined to identify the calling thread of the * VSI-Interface. This must be done correponding to the * type of T_VSI_CALLER in VSI.H. The comma symbol is * neccessary because the vsi-functions are called * like this vsi_xxx (VSI_CALLER par2, par3 ...) */ #ifdef OPTION_MULTITHREAD #define VSI_CALLER cst_handle, #define VSI_CALLER_SINGLE cst_handle #else #define VSI_CALLER #define VSI_CALLER_SINGLE #endif #endif // CUS_CST_H
