bmi3: fixed the mysterious "mute on first call" bug When UI-enabled fw boots on a previously blank (no /mmi/* files) FFS for the first time, the output_volume member of the persistent UI settings structure was left uninitialized, corresponding to the earpiece volume being set to mute, which is an invalid setting. Because of other quirks in the far-from-finished UI code, this volume setting takes effect only when the first call is answered, producing the odd behaviour seen at the user level. The current fix is to set the blank-FFS default for output_volume to volume level 4, which is the same -6 dB Iota volume as the ACI default.

# This patch applies to the Init_Target() function in the init.obj module in
# main.lib; it is an example of how this code will need to be patched for
# running on our own future FreeCalypso hardware if we choose to use the same
# Spansion S71PL129NC0 flash+pSRAM MCP as used in the Pirelli DP-L10 and use
# the same memory timings as set by Pirelli's firmware.

[init.obj]

# value goes into nCS0, nCS1 and nCS3 config registers
.text 66 A4
# value goes into nCS2 config reg
.text 6C A4

# nop out the write into 0x02700000

.text 128 C0
.text 129 46