view src/cs/services/cst/cus_cst.h @ 639:026c98f757a6

tpudrv12.h & targets/gtm900.h: our current support is for MGC2GSMT version only As it turns out, there exist two different Huawei-made hw platforms both bearing the marketing name GTM900-B: one is MG01GSMT, the other is MGC2GSMT. The two are NOT fw-compatible: aside from flash chip differences which should be handled by autodetection, the two hw platforms are already known to have different RFFEs with different control signals, and there may be other differences not yet known. Our current gtm900 build target is for MGC2GSMT only; we do not yet have a specimen of MG01GSMT on hand, hence no support for that version will be possible until and unless someone provides one.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 18:19:01 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/*
+--------------------------------------------------------------------+
| PROJECT : XXX                        SOURCE : CUS_CST.H            |
| AUTHOR  : XXX                        VERSION: 1.0                  |
| CREATED : 01.02.99                   STATE  : code                 |
+--------------------------------------------------------------------+

   MODULE  : CUS_CST

   PURPOSE : Custom dependent definitions for the CST entity of the
             mobile station.

             Use this header for definitions to integrate the protocol
             stack entity CST in your target system.
*/

#ifndef CUS_CST_H
#define CUS_CST_H


/*==== CONSTANTS ==================================================*/
/*
 * TIMER_VALUES
 *
 * Description :  The constants define the timer values for the CST
 *                timer TXXX depending on the various channel types
 *                and service access point identifiers.
 *
 *                If your target system uses other units please
 *                change the values.
 */

/*
 * Unit is 1 ms 
 */
#define T_RX_VALUE              1000
#define TICS_PER_DECIHOURS      (1000*60*6)


/*
 * MAX_CST_TIMER
 *
 * Description :  The constant define the number of timer available
 *                in the timer pool.
 */
#define MAX_CST_TIMER 4

/*
 * VERSION
 *
 * Description :  The constants define the type and the value of a
 *                version identification. The version is part of the
 *                monitor struct.
 */
#define T_VERSION   char
#define VERSION_CST  "CST 1.0"

/*
 * VSI_CALLER
 *
 * Description :  For multithread applications the constant VSI_CALLER
 *                must be defined to identify the calling thread of the
 *                VSI-Interface. This must be done correponding to the
 *                type of T_VSI_CALLER in VSI.H. The comma symbol is
 *                neccessary because the vsi-functions are called
 *                like this vsi_xxx (VSI_CALLER par2, par3 ...)
 */

#ifdef OPTION_MULTITHREAD
#define VSI_CALLER cst_handle,
#define VSI_CALLER_SINGLE cst_handle
#else
#define VSI_CALLER
#define VSI_CALLER_SINGLE
#endif

#endif // CUS_CST_H