FreeCalypso > hg > fc-magnetite

view src/cs/layer1/include/l1_macro.h @ 639:026c98f757a6

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
tpudrv12.h & targets/gtm900.h: our current support is for MGC2GSMT version only As it turns out, there exist two different Huawei-made hw platforms both bearing the marketing name GTM900-B: one is MG01GSMT, the other is MGC2GSMT. The two are NOT fw-compatible: aside from flash chip differences which should be handled by autodetection, the two hw platforms are already known to have different RFFEs with different control signals, and there may be other differences not yet known. Our current gtm900 build target is for MGC2GSMT only; we do not yet have a specimen of MG01GSMT on hand, hence no support for that version will be possible until and unless someone provides one.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 18:19:01 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software 
 * L1_MACRO.H
 *
 *        Filename l1_macro.h
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

#include "l1_confg.h"

#if(L1_DYN_DSP_DWNLD == 1)
  #include "l1_dyn_dwl_const.h"
#endif

#if (TRACE_TYPE==5) && NUCLEUS_TRACE
//WARNING : this type of trace takes a lot of space in data RAM (~16kB)

  // switch for Nucleus debugging messages.
  #define NU_ALLOC_ERR      0
  #define NU_DEALLOC_ERR    1
  #define NU_RCVE_QUEUE_ERR 2
  #define NU_SEND_QUEUE_ERR 3
  #define NU_OBTA_SEMA_ERR  4
  #define NU_RLSE_SEMA_ERR  5

  // Nucleus debug function.
    #define DEBUGMSG(status,type) \
    if(status) switch(type) \
    { \
      case NU_ALLOC_ERR: \
      printf("NU mem. allocation error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      case NU_DEALLOC_ERR: \
      printf("NU mem. deallocation error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      case NU_RCVE_QUEUE_ERR: \
      printf("NU rcve queue error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      case NU_SEND_QUEUE_ERR: \
      printf("NU send queue error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      case NU_OBTA_SEMA_ERR: \
      printf("NU obtain semaph. error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      case NU_RLSE_SEMA_ERR: \
      printf("NU release semaph. error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
      \
      default: \
      printf("Unknown error %d file %s line %d\n", status,__FILE__,__LINE__); \
      exit(0);            \
      break; \
    }
#else
  #define DEBUGMSG(status,type)
#endif

/************************************************************/
/* Macros for FAST INTEGER MODULO implementation.           */
/************************************************************/
#define IncMod(operand, increment, modulo) \
  if( (operand += increment) >= modulo ) operand -= modulo
  

// Define MACRO for selecting the min. time to next task.
#define Select_min_time(Task_Time, Min_Time) \
  if(Task_Time < Min_Time) Min_Time = Task_Time;


/************************************************************/
/* Macros for MCU/DSP API address conversion    .           */
/************************************************************/
#if(L1_DYN_DSP_DWNLD == 1)

#define API_address_dsp2mcu(dsp_address) \
  (MCU_API_BASE_ADDRESS + ((API)((dsp_address) - DSP_API_BASE_ADDRESS) * 2))

#define API_address_mcu2dsp(mcu_address) \
  (DSP_API_BASE_ADDRESS + ((UWORD32)((mcu_address) - MCU_API_BASE_ADDRESS) / 2))
#endif