FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_core/timer/timer1.c @ 639:026c98f757a6
tpudrv12.h & targets/gtm900.h: our current support is for MGC2GSMT version only
As it turns out, there exist two different Huawei-made hw platforms both
bearing the marketing name GTM900-B: one is MG01GSMT, the other is MGC2GSMT.
The two are NOT fw-compatible: aside from flash chip differences which
should be handled by autodetection, the two hw platforms are already known
to have different RFFEs with different control signals, and there may be
other differences not yet known. Our current gtm900 build target is for
MGC2GSMT only; we do not yet have a specimen of MG01GSMT on hand, hence
no support for that version will be possible until and unless someone
provides one.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 30 Jan 2020 18:19:01 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/****************************************************************************** TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION Property of Texas Instruments -- For Unrestricted Internal Use Only Unauthorized reproduction and/or distribution is strictly prohibited. This product is protected under copyright law and trade secret law as an unpublished work. Created 1987, (C) Copyright 1997 Texas Instruments. All rights reserved. Filename : timer1.c Description : Set of useful functions for TIMER module test cases Project : drivers Author : pmonteil@tif.ti.com Patrice Monteil. Version number : 1.4 Date and time : 08/18/00 14:42:35 Previous delta : 06/30/00 11:40:43 SCCS file : /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release_gprs/RELEASE_GPRS/drivers1/common/SCCS/s.timer1.c Sccs Id (SID) : '@(#) timer1.c 1.4 08/18/00 14:42:35 ' *****************************************************************************/ #include "l1sw.cfg" #if (OP_L1_STANDALONE == 0) #include "main/sys_types.h" #else #include "sys_types.h" #endif #include "memif/mem.h" #include "timer1.h" /*--------------------------------------------------------------*/ /* Dtimer1_Get_cntlreg() */ /*--------------------------------------------------------------*/ /* Parameters : none */ /* Return : none */ /* Functionality : read one of the TIMER register */ /*--------------------------------------------------------------*/ SYS_UWORD16 Dtimer1_Get_cntlreg(void) { volatile SYS_UWORD16 timerReg; timerReg = (( * (SYS_UWORD16 *) D_TIMER_CNTL) & D_TIMER_CNTL_MASK); return(timerReg); } /*--------------------------------------------------------------*/ /* Dtimer_Init_cntl() */ /*--------------------------------------------------------------*/ /* Parameters :start/stop,reload yes/no,pre scale,ext clk on/off*/ /* Return : none */ /* Functionality : initialize the timer start, autoreload, Ptv */ /* and clock enable */ /*--------------------------------------------------------------*/ void Dtimer1_Init_cntl (SYS_UWORD16 St, SYS_UWORD16 Reload, SYS_UWORD16 clockScale, SYS_UWORD16 clkon) { SYS_UWORD16 cntl = * (SYS_UWORD16 *) D_TIMER_CNTL; cntl &= ~(D_TIMER_ST | D_TIMER_PTV); /* stop and reset values */ (Reload) ? (cntl |= D_TIMER_AR) : (cntl &= ~D_TIMER_AR); cntl |= (clockScale << 2 ); cntl |= ( clkon << 5 ); * (SYS_UWORD16 *) D_TIMER_LOAD = St; * (SYS_UWORD16 *) D_TIMER_CNTL = cntl; } /*--------------------------------------------------------------*/ /* Dtimer1_AR() */ /*--------------------------------------------------------------*/ /* Parameters :start/stop,reload yes/no,pre scale,ext clk on/off*/ /* Return : none */ /* Functionality : set the AR bit Ar = 0 | 1 */ /*--------------------------------------------------------------*/ void Dtimer1_AR(SYS_UWORD16 Ar) { SYS_UWORD16 cntl = * (SYS_UWORD16 *) D_TIMER_CNTL; cntl &= ~(D_TIMER_ST); /* stop the timer */ cntl &= ~(D_TIMER_AR); cntl |= ( Ar << 1 ); * (SYS_UWORD16 *) D_TIMER_CNTL = cntl; } /*--------------------------------------------------------------*/ /* Dtimer1_PTV() */ /*--------------------------------------------------------------*/ /* Parameters : pre scale */ /* Return : none */ /* Functionality : set the Ptv bits Ptv = 0 => 7 */ /*--------------------------------------------------------------*/ void Dtimer1_PTV(SYS_UWORD16 Ptv) { SYS_UWORD16 cntl = * (SYS_UWORD16 *) D_TIMER_CNTL; cntl &= ~(D_TIMER_ST); /* stop the timer */ cntl &= ~(D_TIMER_PTV); /* Ptv[4:0] set to 0 */ cntl |= ( Ptv << 2 ); * (SYS_UWORD16 *) D_TIMER_CNTL = cntl; } /*--------------------------------------------------------------*/ /* Dtimer1_Clken() */ /*--------------------------------------------------------------*/ /* Parameters : ext clk on/off */ /* Return : none */ /* Functionality : set the clock_enable bit En = 0 | 1 */ /*--------------------------------------------------------------*/ void Dtimer1_Clken(SYS_UWORD16 En) { SYS_UWORD16 cntl = * (SYS_UWORD16 *) D_TIMER_CNTL; cntl &= ( ~D_TIMER_CLK_EN); cntl |= ( En << 5 ); * (SYS_UWORD16 *) D_TIMER_CNTL = cntl; } /*--------------------------------------------------------------*/ /* Dtimer_Start() */ /*--------------------------------------------------------------*/ /* Parameters : on/off */ /* Return : none */ /* Functionality : Start or stop the timer */ /*--------------------------------------------------------------*/ void Dtimer1_Start (SYS_UWORD16 startStop) { (startStop == D_TIMER_ST) ? ((* (SYS_UWORD16 *) D_TIMER_CNTL) |= D_TIMER_ST) : /* condition vrai */ ((* (SYS_UWORD16 *) D_TIMER_CNTL) &= ~D_TIMER_ST); /* condition fausse */ } /*--------------------------------------------------------------*/ /* Dtimer_ReadValue() */ /*--------------------------------------------------------------*/ /* Parameters : on/off */ /* Return : none */ /* Functionality : Read timer value */ /*--------------------------------------------------------------*/ SYS_UWORD16 Dtimer1_ReadValue (void) { return(* (SYS_UWORD16 *) D_TIMER_READ); } /*--------------------------------------------------------------*/ /* Parameters : on/off */ /* Return : none */ /* Functionality : Write timer value */ /*--------------------------------------------------------------*/ void Dtimer1_WriteValue (SYS_UWORD16 value) { (* (SYS_UWORD16 *) D_TIMER_LOAD) = value; }
