FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_core/timer/timer.h @ 639:026c98f757a6
tpudrv12.h & targets/gtm900.h: our current support is for MGC2GSMT version only
As it turns out, there exist two different Huawei-made hw platforms both
bearing the marketing name GTM900-B: one is MG01GSMT, the other is MGC2GSMT.
The two are NOT fw-compatible: aside from flash chip differences which
should be handled by autodetection, the two hw platforms are already known
to have different RFFEs with different control signals, and there may be
other differences not yet known. Our current gtm900 build target is for
MGC2GSMT only; we do not yet have a specimen of MG01GSMT on hand, hence
no support for that version will be possible until and unless someone
provides one.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 30 Jan 2020 18:19:01 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/******************************************************************************* TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION Property of Texas Instruments -- For Unrestricted Internal Use Only Unauthorized reproduction and/or distribution is strictly prohibited. This product is protected under copyright law and trade secret law as an unpublished work. Created 1987, (C) Copyright 1997 Texas Instruments. All rights reserved. Filename : timer.h Description : timer.c header Project : drivers Author : pmonteil@tif.ti.com Patrice Monteil. Version number : 1.3 Date and time : 07/23/98 16:25:53 Previous delta : 07/23/98 16:25:52 SCCS file : /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release1.5/mod/emu/EMU_MCMP/eva3_drivers/source/SCCS/s.timer.h Sccs Id (SID) : '@(#) timer.h 1.3 07/23/98 16:25:53 ' *****************************************************************************/ #include "l1sw.cfg" #if (OP_L1_STANDALONE == 0) #include "main/sys_types.h" #else #include "sys_types.h" #endif #define TIMER_CNTL_REG MEM_TIMER_ADDR /* watchdog Control Timer register */ #define TIMER_ST 0x0080 #define TIMER_AR 0x0100 #define TIMER_PTV 0x0e00 #define TIMER_CNTL_MASK 0x0f80 #define TIMER_MODE_MASK 0x80ff #define TIMER_LOAD_REG (MEM_TIMER_ADDR + 0x02) /* Timer load register */ #define TIMER_READ_REG (MEM_TIMER_ADDR + 0x02) /* Timer read register */ #define TIMER_MODE_REG (MEM_TIMER_ADDR + 0x04) /* Timer mode register */ #define TIMER_WDOG 0x8000 /* watch dog */ #define START_STOP 1 /*to start or stop a timer */ #define AR 0x0002 #define PTV 0x001c #define TIMER_CLK_EN 0x0020 #define TIMER1_CNTL (MEM_TIMER1 + 0x00) #define TIMER1_LOAD_TIM (MEM_TIMER1 + 0x02) #define TIMER1_READ_TIM (MEM_TIMER1 + 0x04) #define TIMER2_CNTL (MEM_TIMER2 + 0x00) #define TIMER2_LOAD_TIM (MEM_TIMER2 + 0x02) #define TIMER2_READ_TIM (MEM_TIMER2 + 0x04) /*-------------------------------------------------------------- * TIMER_START_STOP () *-------------------------------------------------------------- * Parameters : start or stop command * Return : none * Functionality : Start or Stop the timer *--------------------------------------------------------------*/ #define TIMER_START_STOP(startStop) ((startStop) ? ((* (volatile SYS_UWORD16 *) TIMER_CNTL_REG) |= TIMER_ST) : \ ((* (volatile SYS_UWORD16 *) TIMER_CNTL_REG) &= ~TIMER_ST)) /* Prototype of the functions */ void TM_ResetTimer (SYS_UWORD16 timerNum, SYS_UWORD16 countValue, SYS_UWORD16 autoReload, SYS_UWORD16 clockScale); void TM_StopTimer (int timerNum); void TM_StartTimer (int timerNum); SYS_UWORD16 TM_ReadTimer (int timerNum); void TM_DisableWatchdog(void); void TM_EnableWatchdog(void); void TM_ResetWatchdog(SYS_UWORD16 cnt); void TM_EnableTimer (int timerNum); void TM_DisableTimer (int timerNum); SYS_UWORD16 TIMER_Read (unsigned short); void TIMER_WriteValue (SYS_UWORD16); unsigned short TIMER_ReadValue (void);