annotate targets/c11x.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 4a8dacbe9187
children 35e7f9d0379f
Ignore whitespace changes - Everywhere: Within whitespace: At end of lines:
rev   line source
380
36c3c910f709 targets/c11x.{conf,h} added, based on c139
Mychaela Falconia <falcon@freecalypso.org>
parents: 89
diff changeset
1 #define CONFIG_TARGET_C11X 1
590
ea22e20c3d70 targets/c1??.h: define CONFIG_TARGET_C1XX in addition to
Mychaela Falconia <falcon@freecalypso.org>
parents: 380
diff changeset
2 #define CONFIG_TARGET_C1XX 1
89
6c3881378a31 targets: c139 and pirelli added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
3 #define CONFIG_TARGET_COMPAL 1
380
36c3c910f709 targets/c11x.{conf,h} added, based on c139
Mychaela Falconia <falcon@freecalypso.org>
parents: 89
diff changeset
4 #define USE_TSPACT2_FOR_TXLOW 0
627
4a8dacbe9187 targets/*.h: #define GPIO1_SPEAKER_CTRL to 0 or 1 as appropriate
Mychaela Falconia <falcon@freecalypso.org>
parents: 590
diff changeset
5 #define GPIO1_SPEAKER_CTRL 0
89
6c3881378a31 targets: c139 and pirelli added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
6 #define UARTFAX_CLASSIC_DTR_DCD 0