FreeCalypso > hg > fc-magnetite
annotate doc/C139-Howto @ 187:907458d58a86
src/g23m-gprs/gmm/gmm_kernl.c: compilation fixes for !REL99
| author | Mychaela Falconia <falcon@freecalypso.org> | 
|---|---|
| date | Thu, 13 Oct 2016 05:47:00 +0000 | 
| parents | 48792a467305 | 
| children | e2dce971aec9 | 
| rev | line source | 
|---|---|
| 
95
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
1 Running FreeCalypso firmware on the Motorola C139 | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
2 ================================================= | 
| 
94
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
3 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
4 Mot C139 phones are brickable - because the Calypso boot ROM is disabled by PCB | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
5 wiring, the ability to reflash a phone with new firmware critically depends on | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
6 there being a particular kind of boot code in flash sector 0 at all times - a | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
7 particular kind of boot code that allows the boot process to be interrupted and | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
8 diverted to external code loaded via the headset jack serial port. | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
9 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
10 The FreeCalypso project has adopted one specific version of the flash sector 0 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
11 boot code (produced by applying a binary patch to one of Compal/Motorola's | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
12 original versions) for use with all of our firmwares for this target. No matter | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
13 which FreeCalypso firmware you are running - Citrine, Magnetite or tcs211-c139 - | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
14 you flash your FC fw image at offset 0x10000 while keeping this boilerplate boot | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
15 code at the beginning of the flash: | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
16 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
17 ftp://ftp.freecalypso.org/pub/GSM/FreeCalypso/compal-flash-boot-for-fc.bin | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
18 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
19 Because neither FC Citrine nor FC Magnetite implements any phone UI or puts | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
20 anything at all on the LCD, when a C139 phone is flashed with one of our | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
21 firmwares, it will behave very oddly: | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
22 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
23 * Whenever the phone is off but the battery is inserted, even a momentary | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
24 accidental press of the power button will launch a full power-on and firmware | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
25 boot - without any visible indication whatsoever as the LCD stays dark! | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
26 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
27 * Once the firmware has booted from a press of the power button - even a | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
28 momentary accidental press - there is no way to make it shut down and power | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
29 off except by sending a power-off command via the headset jack serial port. | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
30 So it will just keep running until the battery runs down, once again with the | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
31 LCD dark and no visible indication of any kind that it's on. | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
32 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
33 Additional considerations are: | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
34 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
35 * Flashing a given phone back and forth between FreeCalypso and Mot/Compal's | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
36 official firmware is a royal pita, so if you are going to play with | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
37 FreeCalypso on a C139, it would be the easiest to dedicate a phone | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
38 specifically for FC experiments; | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
39 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
40 * We haven't got firmware-controlled battery charging working yet, so you will | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
41 need another phone running one of the official fw versions to charge | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
42 batteries. | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
43 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
44 Converting a phone to FreeCalypso | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
45 ================================= | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
46 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
47 Start by installing FreeCalypso host tools on your PC/laptop or whatever host | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
48 you will use to talk to C139 phones, if you haven't already. If you are | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
49 starting with an unhacked C139 phone running one of the official firmware | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
50 versions, the procedure for flashing and bringing up FreeCalypso for the first | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
51 time is as follows: | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
52 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
53 * Note down your phone's factory IMEI. After you get FreeCalypso firmware | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
54 flashed and running, you will need to set your own IMEISV, as our fw doesn't | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
55 know how to grok Mot/Compal's flash data structures where they store theirs. | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
56 You can set whatever IMEISV you like, but if you would like to keep the | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
57 factory one, it would be the easiest to have it noted down on a piece of | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
58 paper. If you have a labelmaker, you can print a sticky label with the IMEI | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
59 and stick it on the side of the phone where you can easily see it later while | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
60 playing with FreeCalypso. | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
61 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
62 * Get in with fc-loadtool, preceded with tfc139 if necessary - see FC host tools | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
63 documentation. | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
64 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
65 * Once you are in with fc-loadtool, i.e., at the loadtool> prompt, reflash the | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
66 boot sector with the FreeCalypso version: | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
67 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
68 loadtool> flash erase-program-boot compal-flash-boot-for-fc.bin | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
69 | 
| 
95
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
70 * Flash whichever FreeCalypso firmware image you would like to play with, e.g.: | 
| 
94
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
71 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
72 loadtool> flash erase 0x10000 0x230000 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
73 loadtool> flash program-bin 0x10000 fwimage.bin | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
74 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
75 * Erase the flash sectors to be used for the FFS (flash file system) by | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
76 FreeCalypso firmwares: | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
77 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
78 loadtool> flash erase 0x3C0000 0x30000 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
79 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
80 * Exiting fc-loadtool cleanly will cause it to power off the phone: | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
81 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
82 loadtool> exit | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
83 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
84 Reflashing between different FreeCalypso firmwares | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
85 ================================================== | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
86 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
87 By the conventions established in the FreeCalypso project, all of our firmwares | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
88 for the C139 target have the following in common: | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
89 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
90 * They all stay out of the boot sector and expect to receive control from the | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
91 boot code in the same manner (boot entry point at 0x10058, exception vectors | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
92 at 0x10000), thus there is no need to reflash the dangerous boot sector when | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
93 going from one FC firmware to another. | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
94 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
95 * They all use the same aftermarket FFS configuration of 3 sectors of 64 KiB | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
96 each (64x3) at 0x3C0000. This FFS location is deliberately different from | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
97 the one used by Mot/Compal's firmwares, eliminating the possibility of one fw | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
98 trying to use the FFS created by the other, and by putting our FFS toward the | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
99 end of the flash we maximize the amount of flash space available for our | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
100 firmware code images. But even though we don't share our FFS with | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
101 Mot/Compal's official firmwares, we do share the same FFS between all of | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
102 FreeCalypso firmware projects - thus once you have initialized your FFS (see | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
103 below) with one FC firmware version, it will work with the others as well. | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
104 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
105 If you need to reflash your C139 from one FC firmware version to another, | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
106 simply get in with fc-loadtool -h compal (no more need for the inefficient | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
107 -c 1003 or -c 1004 options or for tfc139) and reflash just the fw image part: | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
108 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
109 loadtool> flash erase 0x10000 0x230000 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
110 loadtool> flash program-bin 0x10000 fwimage.bin | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
111 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
112 First boot of the firmware | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
113 ========================== | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
114 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
115 Connect the serial cable, but instead of running fc-loadtool, run rvinterf. | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
116 Press the red power button on the phone briefly just like you would for | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
117 fc-loadtool entry. Because there is no fc-loadtool running on the host end of | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
118 the serial cable, the boot path will *not* be diverted in the bootloader, and | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
119 the main fw image will run - and this time it will be the FreeCalypso firmware | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
120 you have compiled and flashed. The phone's LCD will remain dark as there is no | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
121 LCD driver code in this firmware, but you will see trace output in the rvinterf | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
122 window, telling you that the fw is running. | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
123 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
124 Before you do anything else, you will need to run fc-fsio and initialize the | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
125 aftermarket FFS for our firmware: | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
126 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
127 fsio> format / | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
128 fsio> mk-std-dirs | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
129 fsio> set-imeisv fc XXXXXXXX-YYYYYY-ZZ (punctuation optional, place anywhere) | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
130 fsio> set-rfcap dual-eu (if you have 900+1800 MHz hardware) | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
131 or | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
132 fsio> set-rfcap dual-us (if you have 850+1900 MHz hardware) | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
133 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
134 After you've initialized your FFS as above, you can exit fc-fsio, run fc-shell | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
135 and try some AT commands: | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
136 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
137 AT+CMEE=2 -- enable verbose error responses | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
138 AT+CFUN=1 -- enable radio and SIM interfaces | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
139 AT+COPS=0 -- register to the default GSM network | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
140 | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
141 When you are done, you can power the phone off by sending a 'poweroff' command | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
142 through fc-shell. The only other way is to yank the battery, and doing the | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
143 latter is recommended anyway: when a phone with the present hack-firmware | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
144 flashed into it is powered off but still has the battery inserted, even a | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
145 momentary accidental press of the power button will cause it to power on and | 
| 
 
596d86109e44
initial round of documentation
 
Mychaela Falconia <falcon@freecalypso.org> 
parents:  
diff
changeset
 | 
146 boot, but there will be absolutely no visual indication, as the LCD stays dark. | 
| 
95
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
147 | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
148 Magnetite-specific notes | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
149 ======================== | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
150 | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
151 Just like FC Citrine, FC Magnetite currently supports only AT command operation | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
152 via fc-shell; the C-Sample UI hack we have built earlier in tcs211-c139 has NOT | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
153 been incorporated into Magnetite - at least not yet. | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
154 | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
155 When compiling our Magnetite firmware for the C139 target, you will need to | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
156 select the l1reconst configuration - it is the only currently available | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
157 configuration that works on this target. Therefore, you configure.sh command | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
158 should be: | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
159 | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
160 ./configure.sh c139 l1reconst | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
161 | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
162 See the Compiling write-up for more details. | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
163 | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
164 Because we have not deblobbed the G23M firmware component yet (the l1reconst | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
165 configuration uses G23M binary blobs from TCS211/Sotovik), your Magnetite fw | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
166 build will include FAX_AND_DATA and GPRS functionality. In the FreeCalypso | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
167 environment where we are not doing WAP or MMS this functionality can only be | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
168 exercised on targets that bring out a classic modem UART with the classic AT | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
169 command interface to the external host, but Mot C139 is not one of those | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
170 targets - hence on the C139 all FAX_AND_DATA and GPRS code is nothing but dead | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
171 weight. We will only be able to remove this dead weight when and if we fully | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
172 deblob all of L1 and G23M, so it will be a while before we get there, and we'll | 
| 
 
48792a467305
doc/C139-Howto improved a bit
 
Mychaela Falconia <falcon@freecalypso.org> 
parents: 
94 
diff
changeset
 | 
173 have to carry the dead weight until then. | 
